THE ACREAGE EQUIPMENT FIELD GUIDE
Which tractors fit the TMG Industrial TMG-TFM60? Configurations near its limits
TMG Industrial rates the TMG-TFM60 at 30–60 hp (basis unspecified); 164 of the 294 tractor configurations on this site are not excluded by its limits. The table lists the configurations closest to its power limits and weight, where the answer is most likely to change.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

THE DECISION IN NUMBERS
Configurations nearest the TMG Industrial TMG-TFM60’s limits
Within 3 hp of 30–60 hp (basis unspecified) or near its weight; up to 28 rows, sorted by hp. Results from the site’s screen; † recorded source conflict.
Scroll the table sideways on smaller screens.
| Configuration | PTO hp | Engine hp | Lift at 24 in. | Screen result |
|---|---|---|---|---|
| TYM 3015 gear | 25 | 30 | 2,425 lb | Not excluded |
| TYM 3015 HST | 25 | 30 | 2,425 lb | Not excluded |
| Case IH Farmall 35C gear | 29.7 | 35 | 1,808 lb | Not excluded |
| New Holland Boomer 35 gear | 29.7 | 35 | 1,345 lb | Not excluded |
| New Holland WORKMASTER 35 gear † | 29.7 | 35 | 1,433 lb | Not excluded; conflict † |
| Mahindra 1640 gear † | 29.9 | 38.7 | 1,720 lb | Not excluded; conflict † |
| John Deere 2038R HST † | 30 | 36.8 | 1,356 lb | Not excluded; conflict † |
| John Deere 3038E HST † | 30 | 37 | 1,356 lb | Not excluded; conflict † |
| Massey Ferguson MF 1M.40 power shuttle | 30 | 39.4 | 2,535 lb | Not excluded |
| TYM 3515 gear | 30 | 35 | 2,425 lb | Not excluded |
| TYM 3515 HST | 30 | 35 | 2,425 lb | Not excluded |
| Case IH Farmall 35A HST | 30.1 | 35 | 1,596 lb | Not excluded |
| New Holland WORKMASTER 35C HST | 30.1 | 35 | 1,596 lb | Not excluded |
| TYM T394 gear † | 30.2 | 37.4 | 1,558 lb | Not excluded; conflict † |
| Kubota L3902 HST | 30.3 | 37.5 | 1,435 lb | Not excluded |
| John Deere 5060E power shuttle cab | 42.9 | 60 | 3,192 lb | Not excluded |
| Massey Ferguson MF 2M.60 HST | 44.6 | 60.3 | 3,086 lb | Not excluded |
| John Deere 5060E open station | 45.6 | 60 | 3,192 lb | Not excluded |
| Massey Ferguson MF 2M.60 power shuttle | 47 | 60.3 | 3,307 lb | Not excluded |
| Case IH Farmall Utility 60A gear | 51 | 60 | 2,701 lb | Excluded: over maximum |
| Kubota L6070 Premium HST | 53 | 60 | 2,976 lb | Excluded: over maximum |
| Case IH Farmall Utility 75A power shuttle | 60 | 74 | 4,300 lb | Excluded: over maximum |
| John Deere 4075R HST cab † | 60 | 74.3 | 2,500 lb | Excluded: over maximum |
| Kubota M4-071HDC12 gear cab † | 60 | 72.1 | 3,307 lb | Excluded: over maximum |
| Kubota M4D-071HDC12 gear cab † | 60 | 72.1 | 3,307 lb | Excluded: over maximum |
| Kubota M7060 gear † | 60 | 72.1 | 3,307 lb | Excluded: over maximum |
| TYM T5074 power shuttle | 60.2 | 71.5 | 3,159 lb | Excluded: hitch category |
| John Deere 5075E open station | 60.3 | 73.7 | 3,192 lb | Excluded: over maximum |
Sources for this decision table (20)
- TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weight ↗
- TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specifications ↗
- TYM 3015R North America product brochure (PDF created August 2025) ↗PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
- Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023) ↗Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
- New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025) ↗PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p27 Boomer Series specifications (Boomer 35 and 40/40 CAB columns: PTO hp, 1,808 lb at ball ends, 1,345 lb at 24 in., Category I, width, weight)
- Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight) ↗PDF p5, Tractor Specifications: 1640 Shuttle / HST / HST Cab columns
- John Deere current U.S. 2038R page — source identity and brochure link ↗
- John Deere current U.S. 3038E page — specifications and linked brochure ↗
- Massey Ferguson MF 1M Series spec sheet (PDF created November 6, 2025) ↗p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
- TYM 3515R North America product brochure (PDF created August 2025) ↗PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
- Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026) ↗Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
- New Holland WORKMASTER 35C & 40C Compact Series brochure (PDF created February 26, 2026), linked from the current U.S. page ↗p13 Specifications: gross engine hp; PTO hp gear / HST; 3-Point Hitch Category 1; lift at ball ends and 24 in. behind ball ends; rear PTO type; hydraulic flow; width and weight. p2 overview table
- TYM T394 North America brochure, Aug 2025 — printed/PDF p 4 ↗
- Kubota 2026 Full Line Catalog — L02 specifications, printed p12 (PDF p14) ↗
- John Deere price pages, Tractors 5050E/5060E/5067E/5075E (5 November 2025): 5060E Cab Utility Tractor (06C1LV) ↗06C1LV base equipment: 60 97/68/EC engine horsepower; 42.9 PTO horsepower @ 2,100 rpm; 3-Point (Category II) Hitch with Sway Bars - Convertible to Category I
- Massey Ferguson MF 2M Series spec sheet (PDF created November 3, 2025) ↗p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
- Case IH Farmall utility tractors brochure (PDF created August 21, 2026) ↗Small Utility Specifications: Engine HP, PTO HP, 3-point Hitch Category 1/2, Lift Capacity (footnote 2: measured @ 24 in. behind pin), transmission, weight
- Kubota current U.S. Grand L70 page — exact L6070PRM specifications ↗
- John Deere U.S. order book, 5 May 2026 — 4075R base machine (039ALV) ↗Order code 039ALV: engine 74.3 hp gross SAE J1995, PTO 60 hp, HST 3-range
- TYM Catalog 2026 – Series 5 brochure (PDF created February 8, 2026), linked from the current T5074 and T5075 pages ↗p9–10 Specification Guide, T5074 column: engine power 71.5 hp; PTO power 60.2 hp; F12 x R12 power shuttle; Category II; hitch lift 4,329 lb; 3,159 lb at 24 in. behind link ends; PTO 540/750; width 81.4 in.; ROPS weight 5,463 lb
The published range
TMG Industrial lists the TMG-TFM60 at 30–60 hp (basis unspecified). TMG Industrial does not say whether the range means engine or PTO horsepower, so this site excludes a tractor only when both figures fall outside it. Its manual also caps tractor power at 50 PTO hp, and the screen applies that cap.
How 294 configurations screen
Of the 294 tractor configurations profiled on this site, 164 are not excluded, 65 fall under the minimum, 30 are over the maximum and 35 have a Category 2-only hitch. Not excluded is not approval: most pairings still need the maker or dealer to confirm the setup.
By brand
Configurations not excluded, by brand: Case IH 24 of 31; John Deere 18 of 39; KIOTI 19 of 37; Kubota 17 of 39; LS 14 of 32; Mahindra 8 of 17; Massey Ferguson 18 of 29; New Holland 17 of 18; TYM 20 of 37; Yanmar 9 of 15.
Closest exclusions
The configurations closest to the line are just under the minimum: Mahindra 1126 HST (25.3 hp), Mahindra 2126 HST (25.3 hp), Kubota L2501 HST (24.8 hp); just over the upper limit: Case IH Farmall Utility 60A gear (51 hp), Kubota MX6000 HST (51.8 hp), John Deere 4066M Heavy Duty HST (51.9 hp). A newer spec sheet, a different transmission or the maker’s confirmation can change these.
Weight and hitch
This site retains a 650-lb weight for the TMG-TFM60. No configuration that clears the power range lists less lift 24 inches behind the hitch than that; tractors with no published 24-inch lift are held for review. It mounts on a Category 1 hitch, so Category 2-only tractors are excluded.
Take these questions with you.
- Which exact configuration and transmission is the tractor?
- Does TMG Industrial confirm the TMG-TFM60 at the tractor’s rating?
- What is the complete weight with the PTO shaft?
- What does the dealer list for lift 24 inches behind the hitch?
Keep these questions with your exact tractor and attachment details.
Use these questions in my seller briefFOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
- TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weight
- TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specifications
- TYM 3015R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
- Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
- New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p27 Boomer Series specifications (Boomer 35 and 40/40 CAB columns: PTO hp, 1,808 lb at ball ends, 1,345 lb at 24 in., Category I, width, weight)
- Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight)PDF p5, Tractor Specifications: 1640 Shuttle / HST / HST Cab columns
- John Deere current U.S. 2038R page — source identity and brochure link
- John Deere current U.S. 3038E page — specifications and linked brochure
- Massey Ferguson MF 1M Series spec sheet (PDF created November 6, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
- TYM 3515R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
- Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
- New Holland WORKMASTER 35C & 40C Compact Series brochure (PDF created February 26, 2026), linked from the current U.S. pagep13 Specifications: gross engine hp; PTO hp gear / HST; 3-Point Hitch Category 1; lift at ball ends and 24 in. behind ball ends; rear PTO type; hydraulic flow; width and weight. p2 overview table
- TYM T394 North America brochure, Aug 2025 — printed/PDF p 4
- Kubota 2026 Full Line Catalog — L02 specifications, printed p12 (PDF p14)
- John Deere price pages, Tractors 5050E/5060E/5067E/5075E (5 November 2025): 5060E Cab Utility Tractor (06C1LV)06C1LV base equipment: 60 97/68/EC engine horsepower; 42.9 PTO horsepower @ 2,100 rpm; 3-Point (Category II) Hitch with Sway Bars - Convertible to Category I
- Massey Ferguson MF 2M Series spec sheet (PDF created November 3, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
- Case IH Farmall utility tractors brochure (PDF created August 21, 2026)Small Utility Specifications: Engine HP, PTO HP, 3-point Hitch Category 1/2, Lift Capacity (footnote 2: measured @ 24 in. behind pin), transmission, weight
- Kubota current U.S. Grand L70 page — exact L6070PRM specifications
- John Deere U.S. order book, 5 May 2026 — 4075R base machine (039ALV)Order code 039ALV: engine 74.3 hp gross SAE J1995, PTO 60 hp, HST 3-range
- TYM Catalog 2026 – Series 5 brochure (PDF created February 8, 2026), linked from the current T5074 and T5075 pagesp9–10 Specification Guide, T5074 column: engine power 71.5 hp; PTO power 60.2 hp; F12 x R12 power shuttle; Category II; hitch lift 4,329 lb; 3,159 lb at 24 in. behind link ends; PTO 540/750; width 81.4 in.; ROPS weight 5,463 lb
