FM2560 · hammer rotor

THE BUYING PERSPECTIVE

Know before you order.

• The current official model listing, brochure and manual p14 give 33–80 hp. The manual calls this tractor horsepower without identifying engine or PTO output. These are model-level requirements, not an independently labeled hammer-specific power test. Keep horsepower basis unspecified and obtain written clarification; the 80-hp gearbox rating does not resolve it.
• Capacity evidence rechecked November 8, 2026. Land Pride’s current FM25 catalog conflicts internally: its Three Blade options feature states 1.5-inch hammer capacity, while its cutting-capacity FAQ and July 1, 2024 manual p39 state 2 inches. Confirm the delivered configuration and material conditions; no settled capacity advantage is claimed. Manual p14 also ties minimum power to speed, terrain, material load and moisture.
• The selected configuration is the FM2560 with hammer rotor assembly 333-135A and 16 hammer blades. Duckfoot and heavy-duty Y are different optional rotor assemblies. Manual p30 requires a dealer rotor-assembly change to change blade style; individual blades are not interchangeable between these rotors.
• The 60-inch working width is separate from the 72-inch overall width. The hitch has center and 8-inch right-offset mounting positions, not a hydraulic side-shift cylinder. Offset is a mounting displacement, not a measured distance beyond a tractor tire.
• PTO input is 540 rpm. The published 2,450 rpm is rotor speed, and Category 4 identifies the driveline rather than the three-point hitch category.
• The current brochure’s 929-lb weight differs from the current manual’s 965-lb duckfoot-unit weight. The configurations may differ, but the sources do not reconcile them; neither value establishes hammer operating mass.
• Brush rake inclusion is inconsistent: assembly p15 and the brochure call it optional, while the manual p39 count row says standard. The matching rake kit is 333-091A (8 teeth, 45 lb reference assembly weight). Confirm the quoted equipment and load.
• Manual p15 documents driveline installation and identifies accessory shaft 826-883C for a quick hitch. Pages 18–20 require tractor-specific driveline checks; a quick-hitch label does not establish that the quoted shaft fits the tractor or both hitch positions.
• Cutting height has seven manual settings from 0 to 6 inches. The optional rake is to be removed for grass-only mowing or heights of 5 inches and above (manual pp15,24).
• Ask a Land Pride dealer for an itemized quote covering the selected width, complete hammer rotor, rake choice, shaft, setup and delivery.

Published specifications

Power requirement

33–80 tractor hp · engine/PTO basis unspecified

Rear PTO

540 rpm PTO input

Three-point hitch

Category 1

cutting width

60 inches

Unit weight

Manual p39 specifies 965 lb for the standard unit with a duckfoot rotor; the brochure lists 929 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 222 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load.

Hydraulics

PTO-driven rotor with manually selected center or 8-inch right-offset hitch positions. No external hydraulic motor or side-shift circuit is specified for FM25; remote flow and pressure are not applicable to the documented fixed-position mower. Tractor three-point lifting is a separate requirement.

Accessories & setup

Specify hammer rotor assembly 333-135A in the quote. Brush rake kit 333-091A is described as optional in the assembly instructions; inclusion needs confirmation. Manual p15 identifies accessory quick-hitch driveline 826-883C. Confirm the supplied standard shaft, hitch pins/bushings, dealer assembly, lubrication and tractor-specific shaft sizing.

Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.