TMG-TFM60

THE BUYING PERSPECTIVE

Know before you order.

• Product page says 650 lb operation weight, while linked manual lists 270 kg (about 595 lb).
• Product title/table says 30–60 HP without engine/PTO basis; manual p6 says tractor must not exceed 50 PTO HP, while manual specification table repeats generic 30–60 HP.
• Manual lists 1550 mm cutting width (about 61 inches) while page calls it 60 inches.
• Manual p11 describes side-to-side hitch adjustment by a handle, but the reviewed sources do not establish exact TFM60 travel or cutting-edge reach. This is separate from hydraulic side shift. Placement wording rechecked November 8, 2026.
• Do not infer this mower fits an L2501: both engine and PTO horsepower are below the published 30 HP lower bound.
• Confirm exact tractor model, transmission, model year and manual implement limits.
• Check three-point geometry, actual lift capacity at the implement load center, front ballast and axle limits.
• Check PTO shaft length, overlap, shielding and clearance across permitted hitch travel; quick hitches change geometry.
• Resolve 30–60 HP basis versus manual 50-PTO-HP maximum.
• Confirm delivered operating weight and current working width.

Published specifications

Power requirement

30–60 hp · basis unclear

Rear PTO

540 rpm

Three-point hitch

Category 1

cutting width

60 inches

Unit weight

650 lb — Product-page operation weight; manual gives conflicting 270 kg (about 595 lb)

Hydraulics

PTO-driven mower with no hydraulic side shift listed. The linked manual describes handle-operated lateral hitch adjustment; confirm applicability and available displacement on the delivered TFM60. Do not confuse with hydraulic TFMS models.

Accessories & setup

PTO driveline; Storage kickstand; Resolve power and weight inconsistencies with TMG; Check gearbox oil and driveline length; Confirm ballast/lift limits

Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.