acreage.EQUIPMENT
Compare0Find equipment

John Deere · COMPACT TRACTOR ATTACHMENTS

John Deere 3025D
Attachments that fit.

The John Deere 3025D is a gear-drive compact with 24.72 hp, 20.7 PTO hp, a transmission-driven PTO and 1,670 lb of lift 24 inches behind the hitch. Its PTO rating clears Woodland Mills WC68’s and WoodMaxx FM-62 Y’s 20-hp minimums by 0.7.

20.7PTO hp24.72engine hp1hitch category1,670lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 13, 2026 · Specification research, not a field test

John Deere 3025D hub: John Deere 3025D compact tractor studio photo
Manufacturer photo · John Deere

PTO WOOD CHIPPERS FOR THE 3025D

Chippers that fit the 3025D.

11 of 19 pto wood chippers we track pass the published power, hitch and speed screen. “Specs line up” cards come first.

Full chipper guide
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details

5 more possible options in the full comparison table — see all.

8 ruled out by published specs

FLAIL MOWERS FOR THE 3025D

Flail mowers that fit the 3025D.

8 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details

2 more possible options in the full comparison table — see all.

15 ruled out by published specs
Scope of this guideU.S. 3025D · gear 8F-8R · 4WD · ROPS · transmission-driven PTO. Each configuration below states the model and equipment covered by its sources.

Woodland Mills WC46, WC68 and TFG55, Farmry WCAP5 and WCAP5 Pro, WoodMaxx WM-8H, WM-8M and MX-8800, Farmer-Helper FH-BX42 and Wallenstein BX36S and BX52S fit for chipping. WoodMaxx FM-62 Y and FM-54 Y and Farmry LFS fit for mowing.

  • Brochure: 24.72 hp SAE J1995, 20.7 PTO hp, gear 8F-8R; Category 1.
  • Lift: 1,670 lb at 24 inches behind the center link.
  • Woodland Mills WC68 and WoodMaxx FM-62 Y (20 PTO hp): 0.7 over.
  • WoodMaxx MX-9900 and Farmer-Helper FH-BX62S (25): 4.3 short.
  • Transmission-driven PTO with overrunning clutch.
  • The hydrostatic 3025E has 19.4 PTO hp and 1,356 lb.

Choose the exact configuration.

U.S. 3025D · gear 8F-8R · 4WD · ROPS · transmission-driven PTO

20.7 PTO hp

Current U.S. John Deere 3025D (open station, 4WD, gear 8F-8R) from the July 2025 3 Series brochure, the May 2026 order book (1681LV) and the current page. 2,778 lb.

Engine power
24.72 hp · 24.72 hp rated engine power (SAE J1995) in the 3 Series brochure and the order book; the current page rounds it to 24 hp. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
1,670 lb · 1,670 lb “Lift capacity (24 in. Behind Center Link)” in the July 2025 3 Series brochure.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
See the brochure: implement 5.1–5.9 gpm.
Pressure
Not published in the reviewed brochure.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 13, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. John Deere 3 Series compact utility tractor brochure 3928957 (PDF created July 24, 2025)Specifications: 3025D/3035D/3043D horsepower (SAE J1995), PTO HP geared transmission, lift capacity 24 in. behind center link 1,670 lb, Category 1, gear 8F-8R, transmission-driven PTO with overrunning clutch, weight
  2. John Deere U.S. order book, 5 May 2026 — 3025D Compact Utility Tractor (1681LV)1681LV: Engine HP 24.72 gross SAE J1995, gear transmission, transmission-driven 540 rpm rear PTO
  3. John Deere 3025D current U.S. product pageRated Engine Power 24 hp (SAE J1995)
  4. Farmry official product specifications
  5. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  6. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  7. Farmry official product specifications
  8. Farmry WCAP5 operator manual, Rev 1.5 — Printed pp19–20 specifications; pp30–34 driveline checks
  9. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  10. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  11. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  12. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  13. Official WM-8M page: configuration, 775 lb hitch weight and price
  14. WM-8M manual linked by current WoodMaxx manual index
  15. WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
  16. Official FM-54 page: Y option, displayed price, shaft and weight
  17. FM-54 manual for 2025-and-newer models, p40 specifications
  18. Current manual index: FM-54 under Models 2025 to current
  19. Official fixed FM-62 page: exact black/Y option, USD price, blade guidance and conflicts
  20. Current FM-62/62H and FM-78/78H manual: printed pp31,40,45 / PDF pp32,41,46
  21. Wallenstein official U.S. BX52S page — explicit engine band, capacity, RPM label, reference weight and accessories
  22. Wallenstein BX52S support — currently linked operator, setup and shaft documents
  23. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40
  24. PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
  25. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  26. Official Betstco FH-EF95 product page — PTO hp range, gearbox, widths, weights, blades and price
  27. Farmer-Helper FH-EF Series Manual (June 2025), p13 Machine Specs
  28. Official Betstco FH-EF standard-duty series page
  29. Official Betstco FH-EF105 product page — PTO hp range, gearbox, widths, weights, blades and price
  30. Official Betstco FH-EF125 product page — PTO hp range, gearbox, widths, weights, blades and price

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

John Deere 3025D wood chippers: 0.7 hp over WC68’s 20

Woodland Mills rates WC68 at 20–50 PTO hp and WoodMaxx WM-8M from 19; the John Deere 3025D’s 20.7 PTO hp clears both. Woodland Mills WC46 and TFG55, Farmry WCAP5 and WCAP5 Pro, WoodMaxx WM-8H and MX-8800, Farmer-Helper FH-BX42 and Wallenstein BX36S and BX52S fit too.

Read the guide →FIELD GUIDE

John Deere 3025D flail mowers: FM-62 Y or FM-54 Y

WoodMaxx rates FM-62 with Y-blades at 20–45 PTO hp and FM-54 Y at 15–25; the John Deere 3025D’s 20.7 PTO hp is inside both. Farmry’s LFS mowers fit too. The hammer flails and most others start at 22 PTO hp or more.

Read the guide →