The KIOTI CS2520H and CS2510H are rated 24.5 gross hp and 18.5 PTO hp, with a 700-lb lift at 24 inches. That PTO figure is 0.5 short of WoodMaxx’s 19-PTO-hp WM-8M and WM-8H, and the 24.5 engine hp is 2.5 inside Wallenstein BX52S’s 22-hp minimum. Light chippers like Farmer-Helper FH-BX42 and Woodland Mills WC46 fit both power and lift.
18.5PTO hp24.5engine hp1hitch category700lb lift at 24 in.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test
Manufacturer photo · KIOTI
PTO WOOD CHIPPERS FOR THE CS2520H / CS2510H
Chippers that fit the CS2520H / CS2510H.
7 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.
6 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.
Scope of this guideU.S. CS2520H · hydrostatic, 2-range · 4WD · ROPS · independent PTO / U.S. CS2510H · hydrostatic, 2-range · 4WD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.
Choose among chippers and mowers rated from 15 PTO hp or 22 engine hp that weigh under 700 lb. The WoodMaxx 8-inch chippers are out by half a horsepower.
Brochure and web pages: 24.5 gross engine hp and 18.5 PTO hp for both models; 700 lb at 24 inches.
WoodMaxx WM-8M and WM-8H (19 PTO hp) are 0.5 short; WM-8M’s 775 lb is also over the lift.
Wallenstein BX52S (22–55 engine hp, 505 lb) is inside by 2.5 on engine power.
Farmer-Helper FH-BX42 (15–45 PTO hp, about 430 lb) and Woodland Mills WC46 (15–30, 587 lb) are inside.
Woodland Mills WC68 and WoodMaxx MX-8800 (20 PTO hp) are 1.5 short.
The CS2510 web page prints its lift as “318 lb (700 kg)” in one place, with the units swapped.
Current U.S. KIOTI CS2520H (CS20 series), ROPS, from the August 2026 CS brochure and the current CS2520 page. Weight 1,554 lb with AG tires. Minimum width 45.9 in. Cab models are not profiled.
Engine power
24.5 hp · 24.5 hp engine gross power in the August 2026 brochure and on the current web page; the SAE standard is not named. Rated revolution 3200 rpm in the brochure.
Rear hitch
Category I
Lift at 24 inches
700 lb · 700 lb maximum lift capacity, footnoted to 24 inches aft of the hitch, in the brochure; the web page repeats 700 lb. No lift-point figure is published.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
7.0 gpm gear-pump capacity (maximum flow rate) in the brochure and web page. Rear-remote outlet flow is not published.
Pressure
Not published in the reviewed brochure or web page.
Current U.S. KIOTI CS2510H (CS10 series), ROPS, from the August 2026 CS brochure and the current CS2510 page. Weight 1,485 lb with AG tires. Minimum width 46.7 in. Cab models are not profiled.
Engine power
24.5 hp · 24.5 hp engine gross power in the August 2026 brochure and on the current web page; the SAE standard is not named. Rated revolution 3200 rpm in the brochure.
Rear hitch
Category I
Lift at 24 inches
700 lb · 700 lb maximum lift capacity, footnoted to 24 inches aft of the hitch, in the brochure; the web page repeats 700 lb. No lift-point figure is published.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
6.5 gpm gear-pump capacity (maximum flow rate) in the brochure and web page. Rear-remote outlet flow is not published.
Pressure
Not published in the reviewed brochure or web page.
The brochure lists the CS10/CS20 rated revolution as 3,200 rpm and the PTO figure as “PTO @ Rated PTO rpm”. The CS2510 and CS2520 web pages list 3,000 rpm.
The brochure PTO figure is used; the rated engine speed does not change any attachment screen here. Confirm with the dealer.
Lift units
The CS2510 web page lists 700 lb (318 kg) in its hydraulics section and “318 lb (700 kg)” under Hitch, with the units swapped. The brochure lists 700 lb (317.5 kg).
700 lb at 24 inches is recorded from the brochure.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.