Case IH · COMPACT TRACTOR ATTACHMENTS

Case IH Farmall 45A
Attachments that fit.

The Case IH Farmall 45A, new in the August 2026 sheet, has 47 engine hp, 40.6 PTO hp (mechanical) or 38.3 (servo-hydrostatic) and 2,310 lb of lift at 24 inches. Its 47-hp engine is 2 over Farmry WCAP5’s 45-hp limit, while both PTO figures sit inside the 45-PTO-hp ceilings.

38.3–40.6PTO hp47engine hp1hitch category2,310lb lift at 24 in.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Case IH Farmall 45A hub: Farmall 45A compact tractor
Manufacturer photo · Case IH

PTO WOOD CHIPPERS FOR THE FARMALL 45A

Chippers that fit the Farmall 45A.

12 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.

Full chipper guide
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein

6 more possible options in the full comparison table — see all.

7 ruled out by published specs

FLAIL MOWERS FOR THE FARMALL 45A

Flail mowers that fit the Farmall 45A.

17 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry LFP47 flail mowerFlail mower

Farmry

LFP47

47.2″ cutting width, inches · 25–45 hp · basis unclear

Gear: Possible — confirm detailsHST: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$2,199checked November 7, 2026
Check current price at Farmry

11 more possible options in the full comparison table — see all.

6 ruled out by published specs
Scope of this guideU.S. Farmall 45A · 12x12 mechanical shuttle with synchro shift · MFD · ROPS · independent PTO / U.S. Farmall 45A · 3-range servo-hydrostatic · MFD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Woodland Mills WC68 and WC88, WoodMaxx’s chippers, Farmer-Helper FH-BX62S, Farmry WCAP5 Pro and Wallenstein BX52S fit for chipping. WoodMaxx FM-62 and FM-78, Farmer-Helper FH-EFGC, TMG, Farmry LFP47 and Land Pride FM2560 and FM2572 fit for mowing.

  • 2026 sheet: 47 engine hp; 40.6 PTO hp (mechanical), 38.3 (servo-HST); the page rounds to 41/38.
  • Lift: 2,310 lb at 24 inches behind the pin; Category 1.
  • Woodland Mills WC88 (35 PTO hp): inside by 5.6 / 3.3.
  • Woodland Mills WC68 full feed (over 40 PTO hp): mechanical 0.6 over; HST 1.7 short.
  • Farmry WCAP5 (to 45 engine hp): 2 over.
  • Wallenstein BX72S (50 engine hp): 3 short.

Choose the exact configuration.

U.S. Farmall 45A · 12x12 mechanical shuttle with synchro shift · MFD · ROPS · independent PTO

40.6 PTO hp

Current U.S. Case IH Farmall 45A (non-cab, MFD) from the Case IH specification sheet and the current model page. 3,015 lb.

Engine power
47 hp · 47 engine hp at rated engine rpm (2,600) in Case IH’s August 2026 A-series sheet; gross or net is not stated. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
2,310 lb · 2,310 lb “Lift Capacity @ 24 in. Behind Pin” in the Case IH specification sheet.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
9.9 gpm implement pump; total 16.9 gpm (HST) or 15.5 gpm (mechanical) in the August 2026 sheet.
Pressure
Not published in the reviewed specification sheet.
Find attachments for this tractor

U.S. Farmall 45A · 3-range servo-hydrostatic · MFD · ROPS · independent PTO

38.3 PTO hp

Current U.S. Case IH Farmall 45A (non-cab, MFD) from the Case IH specification sheet and the current model page. 3,037 lb.

Engine power
47 hp · 47 engine hp at rated engine rpm (2,600) in Case IH’s August 2026 A-series sheet; gross or net is not stated. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
2,310 lb · 2,310 lb “Lift Capacity @ 24 in. Behind Pin” in the Case IH specification sheet.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
9.9 gpm implement pump; total 16.9 gpm (HST) or 15.5 gpm (mechanical) in the August 2026 sheet.
Pressure
Not published in the reviewed specification sheet.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Case IH Farmall Compact A specification sheet, models 35A–55A (PDF created August 24, 2026)Specifications: Engine HP, PTO HP (Mechanical Trans. / Hydrostatic Trans.), 3pt Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, implement and total flow, weight
  2. Case IH Farmall Compact 45A current U.S. product pagePTO Horsepower: 41/38
  3. Farmry official product specifications
  4. Farmry WCAP5 PRO operator manual, Rev 1.4 — Printed p13 specifications; pp21–22 conflicting horsepower paragraphs
  5. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  6. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  7. Official U.S. WC88 page: price, capacity and drive system
  8. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  9. Official LFP47 product page: configuration, weight and price
  10. LFP Series operator manual, Rev 1.3, printed pp17–20
  11. Official FM-62 page: exact hammer variant, price and equipment
  12. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  13. WoodMaxx manual index: Models 2025 to current
  14. Official FM-78 page: exact hammer variant, price and equipment
  15. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  16. Official FH-BX62S series page: self feed and current-manual link
  17. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  18. Product-linked older manual, Revision 1-3-2018, p38
  19. Betstco official manual index
  20. Land Pride FM25 current North American family and model listing
  21. Official FM25 public catalog response — active models, gallery and linked documents
  22. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  23. Official FM25 brochure — printed p12 model table
  24. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  25. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.