acreage.EQUIPMENT
Compare0Find equipment

Case IH · COMPACT TRACTOR ATTACHMENTS

Case IH Farmall 50C
Attachments that fit.

The Case IH Farmall 50C has 50 engine hp, 42.5 PTO hp (gear) or 40.0 (HST) and the New Holland Boomer 50’s power. Its engine sits exactly on Wallenstein BX72S’s 50-hp minimum, and the HST’s 40.0 is exactly on Woodland Mills WC68’s full-feed line without passing it.

40–42.5PTO hp50engine hp1hitch category2,756lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Case IH Farmall 50C hub: Farmall 50C compact tractor (C series) product photo
Manufacturer photo · Case IH

PTO WOOD CHIPPERS FOR THE FARMALL 50C

Chippers that fit the Farmall 50C.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.

Full chipper guide
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Wallenstein BX72S PTO wood chipperPTO chipper

Wallenstein

BX72S

7″ max. chip diameter · 50–85 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Fit details
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details

7 more possible options in the full comparison table — see all.

6 ruled out by published specs

FLAIL MOWERS FOR THE FARMALL 50C

Flail mowers that fit the Farmall 50C.

18 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide

12 more possible options in the full comparison table — see all.

5 ruled out by published specs
  • Farmry LFS45 — Both engine (50) and PTO (42.5) horsepower exceed the published 35 hp maximum.
  • Farmry LFS53 — Both engine (50) and PTO (42.5) horsepower exceed the published 35 hp maximum.
  • Farmry LFS61 — Both engine (50) and PTO (42.5) horsepower exceed the published 35 hp maximum.
  • WoodMaxx FM-54 · Y-blades — 42.5 PTO hp exceeds the published 25 hp range.
  • Blue Diamond Heavy Duty 403740 — Both engine (50) and PTO (42.5) horsepower are below the published 75 hp minimum.
Scope of this guideU.S. Farmall 50C · 16x16 mechanical shuttle with synchro shift · MFD · ROPS · independent PTO / U.S. Farmall 50C · 3-range hydrostatic · MFD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Wallenstein BX52S and BX72S, Woodland Mills WC68 and WC88, WoodMaxx’s chippers and the 45-PTO-hp chippers fit for chipping. WoodMaxx FM-62 and FM-78, Farmer-Helper FH-EFGC, TMG and Land Pride FM2560 and FM2572 fit for mowing.

  • Brochure and page: 50 engine hp; 42.5 PTO hp (gear), 40.0 (HST); Category 1.
  • Lift: Case IH lists 2,756 lb “at 24 in.”; New Holland gives 2,116 at 24 in. for the Boomer 50.
  • Wallenstein BX72S (50–85 engine hp): exactly at the minimum.
  • Woodland Mills WC68 full feed (over 40): gear 2.5 over; HST exactly at 40.
  • 45-PTO-hp ceilings: 2.5 / 5 under.
  • Farmry WCAP5 (to 45 engine hp): 5 over.

Choose the exact configuration.

U.S. Farmall 50C · 16x16 mechanical shuttle with synchro shift · MFD · ROPS · independent PTO

42.5 PTO hp

Current U.S. Case IH Farmall 50C (deluxe C series, MFD) from the 2023 compact brochure and the current model page. 3,770 lb non-cab; 4,453 lb cab.

Engine power
50 hp · 50 engine hp at rated engine rpm (2,600) in the Case IH brochure and the current page’s rated engine power; gross or net is not stated. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
2,756 lb · 2,756 lb “Lift Capacity @ 24 in. Behind Pin” in the Case IH brochure; see the note on New Holland’s matching figure.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
8.2 gpm implement pump in the brochure.
Pressure
Not published in the reviewed brochure.
Find attachments for this tractor

U.S. Farmall 50C · 3-range hydrostatic · MFD · ROPS · independent PTO

40 PTO hp

Current U.S. Case IH Farmall 50C (deluxe C series, MFD) from the 2023 compact brochure and the current model page. 3,770 lb non-cab; 4,453 lb cab.

Engine power
50 hp · 50 engine hp at rated engine rpm (2,600) in the Case IH brochure and the current page’s rated engine power; gross or net is not stated. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
2,756 lb · 2,756 lb “Lift Capacity @ 24 in. Behind Pin” in the Case IH brochure; see the note on New Holland’s matching figure.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
8.2 gpm implement pump in the brochure.
Pressure
Not published in the reviewed brochure.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Case IH Farmall compact tractors brochure (©2022, PDF created June 6, 2023)Printed pp28–31 specifications: Engine HP, PTO HP (Mechanical Trans./Hydrostatic Trans.), 3-point Hitch Category 1, Lift Capacity @ 24 in. Behind Pin, weight (cab / non-cab)
  2. Case IH Farmall Compact 50C current U.S. product pageRated Engine Power 50 hp; PTO Horsepower: 42.5/40 (Gear/Hydro)
  3. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  4. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  5. Official U.S. WC88 page: price, capacity and drive system
  6. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  7. Official FM-62 page: exact hammer variant, price and equipment
  8. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  9. WoodMaxx manual index: Models 2025 to current
  10. Official FM-78 page: exact hammer variant, price and equipment
  11. Wallenstein official U.S. BX52S page — explicit engine band, capacity, RPM label, reference weight and accessories
  12. Wallenstein BX52S support — currently linked operator, setup and shaft documents
  13. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40
  14. PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
  15. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  16. Wallenstein BX72S current U.S. page — engine power, current hitch categories, capacity, accessories and reference mass
  17. BX72S official support page — current operator/setup documents
  18. Land Pride FM25 current North American family and model listing
  19. Official FM25 public catalog response — active models, gallery and linked documents
  20. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  21. Official FM25 brochure — printed p12 model table
  22. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  23. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

Case IH Farmall 50C wood chippers: exactly at BX72S’s 50

Wallenstein rates BX72S at 50–85 engine hp and BX52S at 22–55; the Farmall 50C’s 50-hp engine is exactly at BX72S’s minimum and inside BX52S. Woodland Mills WC68 and WC88, WoodMaxx’s chippers and the 45-PTO-hp chippers fit its 42.5 and 40.0 PTO hp.

Read the guide →FIELD GUIDE

Case IH Farmall 50C flail mowers: FM2584 only on engine power

Land Pride rates FM2584 from 49 hp without a basis; the 50C’s 50-hp engine clears it by 1, and its 42.5 and 40.0 PTO hp do not. WoodMaxx FM-62 and FM-78, Farmer-Helper FH-EFGC, TMG and Land Pride FM2560 and FM2572 fit with room.

Read the guide →