John Deere · COMPACT TRACTOR ATTACHMENTS
The current U.S. 1025R specification pairs 18 PTO hp with a Limited Category 1 hitch. Some chippers clear the power screen but still need explicit geometry, lift-height and implement-load approval.
By Acreage Equipment · Reviewed November 6, 2026 · Specification research, not a field test
PTO WOOD CHIPPERS FOR THE 1025R
7 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperFarmry
5″ max. chip diameter · 15–45 engine hp
Limited Category 1: confirm tractor-specific hitch geometry, lift height and driveline clearance with the implement manufacturer.
PTO chipperFarmry
5″ max. chip diameter · 15–45 PTO hp
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWoodland Mills
5″ max. chip diameter · 12–30 PTO hp in table; manual hitch paragraph says 15–30 — resolve before selection
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWoodland Mills
4″ max. chip diameter · 15–30 PTO hp
Limited Category 1: confirm tractor-specific hitch geometry, lift height and driveline clearance with the implement manufacturer.
PTO chipperWallenstein
3.5″ max. chip diameter · 12–30 engine hp · official U.S. page
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
1 more possible option in the full comparison table — see all.
FLAIL MOWERS FOR THE 1025R
6 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
Flail mowerFarmry
45.3″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
53.1″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
61″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerWoodMaxx
47″ cutting width · 15–25 PTO hp · Y-blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerFarmer-Helper
37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
Limited Category 1: confirm tractor-specific hitch geometry, lift height and driveline clearance with the implement manufacturer.
Flail mowerFarmer-Helper
41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox
Limited Category 1: confirm tractor-specific hitch geometry, lift height and driveline clearance with the implement manufacturer.
HST, two ranges
Current U.S. product configuration, hydrostatic two range, as published by John Deere on the checked date. This record does not establish a model-year or serial-number applicability cutoff.
Current JSON uses internal key numberOfMidSelectiveControlValvesScvs with display title Number of Rear Selective Control Valves (SCVs) and value 3.
Do not assert three installed rear remotes. Leave installed valves unverified and require actual tractor confirmation.
FOLLOW THE NUMBERS
Research record reviewed November 6, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB
The current U.S. 1025R specifications list 18 PTO hp and a Limited Category 1 rear hitch. That combination makes hitch travel and implement load as important as power. No chipper in this guide receives a blanket fit recommendation.
Read the guide →FIELD GUIDEThe researched U.S. 1025R is rated at 24 engine hp and 18 PTO hp with a Limited Category 1 hitch. That puts it below the LFP47’s 25 hp minimum under either horsepower interpretation. WoodMaxx’s FM-54 · Y-blades includes 18 in its documented PTO band, but the hammer option does not; weight discrepancies and limited-hitch geometry still need resolution.
Read the guide →