John Deere · COMPACT TRACTOR ATTACHMENTS
This 2025R guide covers North America serial RS000001 onward, listed as MY2025 onward. Its operator manual gives 18.2 estimated PTO hp, a Limited Category 1 hitch and 914 lb of lift at 24 inches behind the arms. Those figures must not be carried across the full history of the 2025R name.
By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test
PTO WOOD CHIPPERS FOR THE 2025R
7 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
PTO chipperWoodland Mills
4″ max. chip diameter · 15–30 PTO hp
Limited Category 1: confirm tractor-specific hitch geometry, lift height and driveline clearance with the implement manufacturer.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperFarmry
5″ max. chip diameter · 15–45 engine hp
Limited Category 1: confirm tractor-specific hitch geometry, lift height and driveline clearance with the implement manufacturer.
PTO chipperFarmry
5″ max. chip diameter · 15–45 PTO hp
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWoodland Mills
5″ max. chip diameter · 12–30 PTO hp in table; manual hitch paragraph says 15–30 — resolve before selection
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWallenstein
3.5″ max. chip diameter · 12–30 engine hp · official U.S. page
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
1 more possible option in the full comparison table — see all.
FLAIL MOWERS FOR THE 2025R
6 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
Flail mowerWoodMaxx
47″ cutting width · 15–25 PTO hp · Y-blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerFarmer-Helper
37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
Limited Category 1: confirm tractor-specific hitch geometry, lift height and driveline clearance with the implement manufacturer.
Flail mowerFarmer-Helper
41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox
Limited Category 1: confirm tractor-specific hitch geometry, lift height and driveline clearance with the implement manufacturer.
Flail mowerFarmry
45.3″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
53.1″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
61″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
MY2025+ · serial RS000001– · 2-range HST · 4WD · ROPS
North America 2025R serial RS000001 onward (MY2025 onward in the official manual listing), operator manual OMTR153282 dated 18 Nov 2025. Two-range hydrostatic, 4WD, ROPS configuration. Does not cover earlier 2025R serial ranges, 2026R, 1R 25, or an assumed cab conversion. Confirm exact serial number before using these figures.
Exact North America RS000001– manual gives 18.2 estimated PTO hp. Current-linked 04-25 brochure gives 17.2. The May 2026 1511LV ALDI entry states 18 and also 14.5 in its base-machine paragraph.
Use 18.2 only for the explicitly scoped manual configuration. Do not silently repair the book, blend generations or apply this profile to earlier serial numbers.
Manual gives 3.5 gpm implement and 3.5 steering, but printed total 7.1; brochure prints 3.5 + 3.5 = 7.0; book prints 6.3 total without a circuit split.
Retain manual circuit values and printed total independently, with all disagreements visible. Do not convert total into rear-coupler delivery.
Manual prints 415 kg / 914 lb at 24 in behind arms; current-linked brochure prints 415 kg / 915 lb at 24 in behind lift point.
Retain 914 lb and the exact manual basis for this serial-scoped record; do not treat the one-pound publication difference as extra capacity.
Manual printed 400-3 lists 1,327 kg / 2,925 lb for base ROPS tractor with R4 tires and fluids (half fuel); brochure lists 1,872 lb with all fluids.
Do not normalize tractor mass or compute stability/ballast from either value. Obtain the correct serial/configuration weight from Deere.
Current component reports rear SCV count 2 without standard/optional status; 2026 book describes rear routing and an optional third-SCV kit with one rear coupler set.
Leave installed remote count unknown and verify the actual circuit, options and compatibility.
FOLLOW THE NUMBERS
Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB
For North America 2025R serial RS000001 onward, the operator manual publishes 18.2 estimated PTO hp. Its 914 lb lift rating at 24 inches does not unlock chippers needing 19 or 20 PTO hp, and the Limited Category 1 hitch still needs geometry and clearance checks for a lower-power candidate.
Read the guide →FIELD GUIDEOn the researched North America RS000001-onward 2025R, 18.2 estimated PTO hp includes the FM-54 Y-blade configuration but remains below its hammer alternative and the larger FM-62 hammer minimum. The manual’s 49-inch R4-tire width also makes a 47-inch actual cut a coverage question before purchase.
Read the guide →