John Deere · COMPACT TRACTOR ATTACHMENTS
Start with the documents for your 3025E. The current 1355LV specification gives 19.4 PTO hp, while Deere’s historical 1350LV book gives 17.4. That difference changes the screen for a chipper requiring 19 PTO hp; neither figure reaches a 20-hp minimum.
By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test
PTO WOOD CHIPPERS FOR THE 3025E
9 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
PTO chipperWoodland Mills
4″ max. chip diameter · 15–30 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperWoodMaxx
8″ max. chip diameter · 19 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWoodMaxx
8″ max. chip diameter · 19 PTO hp minimum; maximum not stated
Resolve the conflicting published specifications for the exact model revision.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperFarmry
5″ max. chip diameter · 15–45 engine hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperFarmry
5″ max. chip diameter · 15–45 PTO hp
Resolve the conflicting published specifications for the exact model revision.
3 more possible options in the full comparison table — see all.
FLAIL MOWERS FOR THE 3025E
6 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
Flail mowerWoodMaxx
47″ cutting width · 15–25 PTO hp · Y-blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerFarmer-Helper
37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Flail mowerFarmer-Helper
41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Flail mowerFarmry
45.3″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
53.1″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
61″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
1355LV U.S. document scope · 2-range HST · 4WD · folding ROPS
U.S. 3025E, base code 1355LV, two-range hydrostatic transmission, 4WD and folding ROPS. Current page and 5 May 2026 U.S.-destination specification book, with qualified lift/hitch data from the currently linked 25-04 brochure. No serial cutoff is verified. Excludes the historical 1350LV/17.4-PTO-hp specification, 3025D gear tractor and unverified cab conversions.
The current-linked brochure and May 2026 1355LV book publish 19.4 PTO hp. The June 2017 1350LV specification publishes 17.4 PTO hp. A serial cutoff or cause of the change is not established.
The selectable record uses the current 1355LV document scope only. An older 3025E must be checked against its own manual; do not apply 19.4 by model name alone.
Current public data labels 24 hp SAE J1995 and 25 PS with engine 3TNV88F-EPJT2; brochure labels 24.7 (18.2 kW) with 3TNV88F-EPJT1; May 2026 book labels 24.7 (18.2 kW) with mixed HP/PS notation.
Retain the rounded current-page hp label for display. Confirm the exact engine rating and serial-specific documents before a close engine-power decision; do not manufacture a precise conversion.
The linked brochure states 1,356 lb at 24 inches behind center link; the current component omits lift and identifies a different engine suffix. No serial applicability range is established.
Use this only as a qualified brochure reference. Obtain the actual tractor manual, complete implement mass and load center; link-end lift remains unknown.
The web component labels a rear-SCV count of 2; the May 2026 book lists BXX11659 dual rear SCVs as a field-conversion option for MY23 and newer 3E tractors.
Installed rear valves remain unverified. Check the actual tractor and the hydraulic ordering guide; do not assume two factory-standard remotes.
Current web data and linked brochure list 2,400 rpm rated engine speed; the May 2026 book lists 2,500.
Rear PTO remains a separately documented 540 rpm. Use the actual operator manual and PTO indicator; no engine-speed operating instruction is inferred here.
FOLLOW THE NUMBERS
Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB
On the current 19.4-PTO-hp 3025E specification, a 47-inch FM-54 with Y-blades clears its published power range. Its hammer alternative and the 55-inch FM-62 Y configuration start at 20 PTO hp. A similar-looking rotor or a bigger tractor frame cannot close that gap.
Read the guide →FIELD GUIDEThe current 3025E document package gives 19.4 PTO hp: enough to clear a 19-hp WM-8 minimum, but 0.6 below WC68 and MX-8800. Deere’s older 17.4-hp specification changes the WM-8 result, so identify the tractor before using the comparison.
Read the guide →