acreage.EQUIPMENT
Compare0Find equipment

John Deere · COMPACT TRACTOR ATTACHMENTS

John Deere 3033R
Attachments that fit.

The U.S. 1368LV open-station eHydro profile has 24.3 PTO hp and a brochure lift reference of 2,200 lb at 24 inches. Those figures lead to different decisions: the FM62 hammer barely clears its minimum, while MX9900 misses its own minimum.

24.3PTO hp32engine hp1hitch category2,200lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test

John Deere 3033R compact tractor
Manufacturer photo · John Deere

PTO WOOD CHIPPERS FOR THE 3033R

Chippers that fit the 3033R.

11 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
Wallenstein BX52RI PTO wood chipperPTO chipper

Wallenstein

BX52RI

5″ max. chip diameter · 30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details

5 more possible options in the full comparison table — see all.

8 ruled out by published specs

FLAIL MOWERS FOR THE 3033R

Flail mowers that fit the 3033R.

15 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry HFS87 flail mowerFlail mower

Farmry

HFS87

87″ cutting width · 30–85 HP (basis not stated) · official page and manual

Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$4,499checked November 14, 2026
Check current price at Farmry
Fit details
Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details

9 more possible options in the full comparison table — see all.

8 ruled out by published specs
Scope of this guide1368LV U.S. document scope · 3-range eHydro · 4WD · open station / folding ROPS. Each configuration below states the model and equipment covered by its sources.

Start with the exact transmission and PIN. Choose the mower blade configuration before interpreting its horsepower range, and compare WC46, WC68 and MX8800 without treating capacity labels or the larger 3R lift reference as a power allowance.

  • 24.3 PTO hp is 0.3 above the FM62 hammer minimum and 0.7 below the MX9900 minimum.
  • FM62 Y starts at 20 PTO hp; factory Y and hammer machines are separate choices.
  • WC46’s over-20 full-diameter/full-feed power condition is cleared; WC68’s over-40 condition is not.
  • Rear-SCV and mid-PTO equipment require build confirmation; 15.3 gpm is total brochure flow, not implement-only flow.
  • The Deere/iMatch implement-code table does not supply a weight allowance for these third-party implements.

Choose the exact configuration.

1368LV U.S. document scope · 3-range eHydro · 4WD · open station / folding ROPS

24.3 PTO hp

U.S. destination 0202, base 1368LV, open-station option 2000 and eHydro option 1520 in the 5 May 2026 specification book. A document-defined research profile, not a claimed model-year or serial range. Cab, PowrReverser, historical ALV base codes and non-U.S. variants are excluded. Installed rear SCVs, mid PTO and hitch accessories are not assumed.

Engine power
32 hp · 32 hp SAE J1995 rounded label in the current U.S. public specification component. The book/brochure print 32.2 with kW/PS notation; OMLVU28866 prints 31.8 gross hp in an older section. Exact engine-rating basis and serial applicability need confirmation; none is a PTO rating.
Rear hitch
Category 1
Lift at 24 inches
2,200 lb · Current-linked 3 Series brochure 7622984 (25-04), p15: 2,200 lb at 24 inches behind center link. This is not link-end lift, an implement-weight limit, or load capacity at every actual center of gravity; serial applicability remains unverified.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
Current-linked brochure: 9.1 gpm implement + 6.2 gpm steering = 15.3 gpm total. The older OMLVU28866 section separately lists 8.6 gpm implement, 5.9 gpm steering and 14.4 gpm total; its rounded component figures do not sum to that listed total. Exact serial-specific flow remains unresolved; 15.3 is not implement-only flow or a rear-remote guarantee.
Pressure
Current 1368LV pressure not confirmed. OMLVU28866 lists 2,500 psi working pressure in a 2014 section, but applicability to this U.S. document scope is unverified.
Find attachments for this tractor

Where the documents disagree.

Engine horsepower

Current U.S. component uses rounded 32 hp; book/brochure print 32.2 beside kW/PS notation; older North American manual distinguishes gross hp.

Retain the qualified current U.S. label; do not convert it into PTO output or select a power basis for an unspecified implement requirement.

transmission

Current U.S. book lists eHydro 1520 in the base configuration; brochure p15 calls PowrReverser standard and HST optional.

Scope this record to documented eHydro only; no all-years or PRT claim.

mid PTO / rear SCV equipment

Open-station option note permits 3330+3420 or 3320+3400, while 1520 description says it requires 3420.

Treat packages as documented alternatives requiring build confirmation; never assume mid PTO or rear SCV installed.

hydraulic flow and pressure

Brochure 9.1 implement / 6.2 steering / 15.3 total gpm differs from OMLVU28866 8.6 / 5.9 / 14.4. The manual alone provides 2,500 psi working pressure with unverified current applicability.

Display source and scope conflict; leave exact current pressure unconfirmed and require serial-specific circuit verification.

public hydraulic component

Current component groups 9.1–15.3 gpm under an implement entry; brochure explicitly separates 9.1 implement from 15.3 total.

Use the brochure split as a qualified reference, never 15.3 gpm of usable rear-implement flow.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. John Deere 3033R current U.S. product page
  2. Public specification component referenced by current U.S. page, 1368LV/context 356308
  3. 5 May 2026 U.S. specification book — 1368LV, PDF pp87–108; power p87, U.S./open station p88, eHydro p91, SCVs p95
  4. John Deere current-linked 3 Series brochure 7622984 (25-04), printed/PDF p15 specifications and p16 scope notes
  5. OMLVU28866 North American manual — engine ratings; serial applicability to current base codes unverified
  6. OMLVU28866 — Hydraulic System; 2014 section differs from current-linked brochure
  7. OMLVU28866 — Ballasting Machine, Deere implement-code tables for iMatch; no third-party code assigned
  8. OMLVU28866 — Drivetrain, three-range hydrostatic specification
  9. OMLVU28866 — Product Identification Information
  10. Official FM-54 page: Y option, displayed price, shaft and weight
  11. FM-54 manual for 2025-and-newer models, p40 specifications
  12. Current manual index: FM-54 under Models 2025 to current
  13. Official fixed FM-62 page: exact black/Y option, USD price, blade guidance and conflicts
  14. Current FM-62/62H and FM-78/78H manual: printed pp31,40,45 / PDF pp32,41,46
  15. Official FM-62H page: hammer option, price, equipment and conflicting weights
  16. Official FM-78 page: exact hammer variant, price and equipment
  17. Land Pride FM25 current North American family and model listing
  18. Official FM25 public catalog response — active models, gallery and linked documents
  19. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  20. Official FM25 brochure — printed p12 model table
  21. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  22. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  23. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  24. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  25. Official MX-8800 page: power/capacity claims, feed, hitch and current sale price
  26. MX-8800 manual Rev D, September 18, 2026: specifications and setup
  27. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  28. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  29. Official Betstco FH-EF95 product page — PTO hp range, gearbox, widths, weights, blades and price
  30. Farmer-Helper FH-EF Series Manual (June 2025), p13 Machine Specs
  31. Official Betstco FH-EF standard-duty series page
  32. Official Betstco FH-EF105 product page — PTO hp range, gearbox, widths, weights, blades and price
  33. Official Betstco FH-EF125 product page — PTO hp range, gearbox, widths, weights, blades and price

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

John Deere 3033R flail mowers: the 24.3-PTO-hp hammer decision

For the U.S. 1368LV open-station eHydro scope, 24.3 PTO hp is only 0.3 above the FM62 hammer minimum. The same 55-inch FM62 with Y-blades has a lower 20-hp minimum, while FM78 starts at 30. The 3R hitch’s larger lift reference does not widen those power bands.

Read the guide →FIELD GUIDE

John Deere 3033R wood chippers: why MX8800 and MX9900 separate

The selected 3033R eHydro profile supplies 24.3 PTO hp. That clears the MX8800’s 20-hp minimum but falls 0.7 short of the MX9900’s 25-hp minimum. WC46 and WC68 both enter their published ranges, yet their full-diameter conditions are different.

Read the guide →