acreage.EQUIPMENT
Compare0Find equipment

John Deere · COMPACT TRACTOR ATTACHMENTS

John Deere 4044M
Attachments that fit.

This guide uses the U.S.-linked brochure’s explicitly labeled 33.6-PTO-hp hydro configuration and retains the conflicting, unqualified 32.5 figure. Engine-rated chippers, ambiguous FM25 requirements and loader-dependent rear-valve kits require separate decisions.

33.6PTO hp43engine hp1hitch category2,500lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test

John Deere 4044M compact tractor
Manufacturer photo · John Deere

PTO WOOD CHIPPERS FOR THE 4044M

Chippers that fit the 4044M.

11 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Wallenstein BX52RI PTO wood chipperPTO chipper

Wallenstein

BX52RI

5″ max. chip diameter · 30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details

5 more possible options in the full comparison table — see all.

8 ruled out by published specs

FLAIL MOWERS FOR THE 4044M

Flail mowers that fit the 4044M.

20 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry HFS87 flail mowerFlail mower

Farmry

HFS87

87″ cutting width · 30–85 HP (basis not stated) · official page and manual

Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$4,499checked November 14, 2026
Check current price at Farmry
Fit details
Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details

14 more possible options in the full comparison table — see all.

3 ruled out by published specs
Scope of this guideU.S.-linked brochure HST scope · 031ALV / eHydro 1520 reference · 4WD · open station. Each configuration below states the model and equipment covered by its sources.

Match the horsepower basis before comparing equipment. For flails, settle FM25’s requirement and the exact loader/SCV arrangement. For chippers, compare BX52S gravity feed with WC68’s self-contained hydraulic feed, then verify actual hitch geometry and complete load.

  • 33.6 is a brochure-defined hydro reference, not a verified rating for every current 4044M serial number.
  • FM2560’s 33-hp threshold is sensitive to the conflicting PTO figures; FM2572’s 42 threshold requires an engine/PTO definition.
  • Rear hydraulic kit paths depend on D170/400E versus H180/440R or no loader.
  • BX52S’s 22–55 band is engine hp; WC68’s 20–50 band is PTO hp. Neither feed system requires tractor rear remotes.
  • 2,500 lb at 24 inches and 3,130 lb at link ends are different references. Older Limited Category 1 wording remains unresolved.

Choose the exact configuration.

U.S.-linked brochure HST scope · 031ALV / eHydro 1520 reference · 4WD · open station

33.6 PTO hp

Brochure-defined 4044M hydro configuration, connected to the U.S. page’s 031ALV base and May 2026 book option 1520 eHydro / 2000 open station. No verified model-year or full-PIN range is claimed. PRT, 4044R, Heavy Duty 4M variants and non-U.S. configurations are not selected. Installed loader and valve equipment require separate confirmation.

Engine power
43 hp · Rounded 43 hp SAE J1995 label in the current U.S. specification component. The U.S. book prints 43.1 with 31.7 kW and PS notation; the linked brochure labels 43.1 using a 97/68/EC gross-power footnote. The older manual also prints 43.1 hp with 31.7 kW. No exact current serial rating or conversion is inferred.
Rear hitch
Category 1 in current-linked brochure; older manual says Limited Category 1 — verify geometry
Lift at 24 inches
2,500 lb · Current-linked 4 Series brochure p14: 2,500 lb at 24 inches behind link arms. Its separate 3,130-lb value is at link ends. Older OMLVU28780 corroborates these locations but current full-PIN applicability is unverified. Neither is a universal implement limit.
Lift at link ends
3,130 lb
Hydraulics
Current-linked brochure lists 15.9 gpm total capacity. It does not establish an implement-only or installed rear-remote flow here. Exact current serial-specific implement/steering split remains unverified.
Pressure
Not confirmed for this brochure-defined U.S. HST scope in the reviewed applicable sources.
Find attachments for this tractor

Where the documents disagree.

PTO horsepower

Brochure p14 explicitly gives 33.6 hydro / 34.6 gear PTO hp; U.S. book and older manual give 32.5 without transmission qualification. The book pairs 32.5 with 23.0 kW while the manual pairs it with 24.2 kW.

Use 33.6 only as a labeled brochure-HST reference; preserve unqualified 32.5 and do not invent a serial cutoff, conversion or HST assignment.

Engine horsepower

Current component rounds to 43 hp SAE J1995; book/brochure/manual use 43.1 with mixed kW/PS or different gross-power standard labels.

Keep the engine basis visible and separate from PTO; obtain exact PIN-specific rating for boundary decisions.

hitch limitation

Current-linked brochure says Category 1; older manual says Limited Category 1.

Confirm whether the limited-hitch designation applies to the actual tractor, using its geometry and matching manual. The conflicting documents do not establish a single restriction for every 4044M.

transmission base status

Book option table lists eHydro in base while its introductory prose and brochure standard-transmission row name PowrReverser.

Scope only the documented hydro configuration; do not infer what every current or older machine has.

rear hydraulics

Optional functions and loader-dependent kits are listed; no source establishes installed rear valves on a specific machine.

Verify loader model, build, hydraulic ordering guide and actual rear circuit before hydraulic-offset selection.

PTO mode

Public component labels 540 under economy PTO speeds; brochure identifies independent rear 540 and says Economy PTO No.

Record rear 540 only. Do not infer an economy setting or 1,000-rpm output.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. John Deere 4044M current U.S. product page
  2. 4044M public specification component referenced by U.S. page: 031ALV / context 356308
  3. 5 May 2026 U.S. order book: 031ALV, PDF pp159–179; unspecified PTO p159, transmission/open station p160, rear hydraulics p175
  4. Current-linked 4 Series brochure 7623318 (25-04): p14 gear/hydro power and both lift bases; p16 scope
  5. OMLVU28780 North America, July 2014: engine table, 2015 section; PTO not assigned to transmission
  6. OMLVU28780: drivetrain, HST and PRT separately described
  7. OMLVU28780: 3-Point Hitch, Limited Category 1 wording and two lift bases
  8. OMLVU28780: ballast codes and whole-machine ballasted-weight limit
  9. OMLVU28780: identification page; printed 010001-on fragment is not a verified current full-PIN scope
  10. Land Pride FM25 current North American family and model listing
  11. Official FM25 public catalog response — active models, gallery and linked documents
  12. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  13. Official FM25 brochure — printed p12 model table
  14. Official FM-78 page: exact hammer variant, price and equipment
  15. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  16. WoodMaxx manual index: Models 2025 to current
  17. Official FM-78H page: hammer option, price, equipment and conflicting weights
  18. Wallenstein official U.S. BX52S page — explicit engine band, capacity, RPM label, reference weight and accessories
  19. Wallenstein BX52S support — currently linked operator, setup and shaft documents
  20. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40
  21. PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
  22. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  23. Wallenstein BX72S current U.S. page — engine power, current hitch categories, capacity, accessories and reference mass
  24. BX72S official support page — current operator/setup documents
  25. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  26. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  27. Official U.S. WC88 page: price, capacity and drive system
  28. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  29. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  30. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  31. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  32. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

John Deere 4044M flail mowers: power basis and loader-dependent hydraulics

This guide uses the current-linked brochure’s explicitly labeled 33.6-PTO-hp hydro configuration. The U.S. order book and older manual also publish 32.5 without naming the transmission. That unresolved difference matters at FM2560’s 33-hp threshold; FM2572 raises a separate engine-versus-PTO question. A hydraulic-offset mower also needs the 4044M’s exact loader and valve arrangement checked.

Read the guide →FIELD GUIDE

John Deere 4044M wood chippers: engine-rated gravity feed or PTO-rated hydraulic feed

The current U.S. page’s rounded engine label is 43 hp; the linked brochure’s hydro row is 33.6 PTO hp, with an unqualified 32.5 elsewhere still unresolved. Wallenstein BX52S uses an engine-hp band, while Woodland Mills WC68 uses PTO hp. Comparing those requirements on their stated bases leaves a useful gravity-feed versus self-contained hydraulic-feed choice.

Read the guide →