KIOTI CX2510 · PTO WOOD CHIPPERS
WoodMaxx rates its 8-inch WM-8H and WM-8M from 19 PTO hp. KIOTI rates the manual CX2510 at 19.3 and the HST at 18.8 in its brochure (19.3 on the HST page). Both run the 15-hp-class chippers and Wallenstein BX52S on their 24.5 gross hp.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test
PUT THIS GUIDE TO WORK
See published mismatches and the checks still needed.
BEST MATCHES FOR THE CX2510
9 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.
PTO chipperWoodland Mills
4″ max. chip diameter · 15–30 PTO hp
Confirm implement weight limits, center of gravity, front ballast and stability in your tractor manual.
PTO chipperFarmry
5″ max. chip diameter · 15–45 engine hp
Confirm implement weight limits, center of gravity, front ballast and stability in your tractor manual.
PTO chipperWoodMaxx
8″ max. chip diameter · 19 PTO hp minimum; maximum not stated
18.8 PTO hp is below the 19 hp minimum.
PTO chipperWoodMaxx
8″ max. chip diameter · 19 PTO hp minimum; maximum not stated
18.8 PTO hp is below the 19 hp minimum.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperFarmry
5″ max. chip diameter · 15–45 PTO hp
Resolve the conflicting published specifications for the exact model revision.
3 more possible options in the full comparison table.
THE DECISION IN NUMBERS
Tractor reference: KIOTI CX2510, September 2025 CX brochure and current pages; Category I.
Scroll the table sideways on smaller screens.
| Chipper | Published requirement | Manual 19.3 | HST 18.8 (brochure) |
|---|---|---|---|
| WoodMaxx WM-8H / WM-8M | 19 PTO hp minimum; full 8-inch at 50 | Inside (+0.3) | 0.2 short (inside on the page’s 19.3) |
| Farmer-Helper FH-BX42 / Farmry WCAP5 Pro | 15–45 PTO hp | Inside | Inside |
| Woodland Mills WC46 | 15–30 PTO hp; over 20 for full 4-inch | Inside; 0.7 short of the 20 condition | Inside; 1.2 short |
| Wallenstein BX52S | 22–55 engine hp | Inside (+2.5) | Inside (+2.5) |
| Farmry WCAP5 / Wallenstein BX36S | 15–45 / 12–30 engine hp | Inside | Inside |
| Woodland Mills WC68 / WoodMaxx MX-8800 | 20 PTO hp minimum | 0.7 short: excluded | 1.2 short: excluded |
WoodMaxx lists WM-8H and WM-8M from 19 PTO hp and claims 4-inch hardwood or 6-inch softwood at that power. The manual CX2510 is 0.3 over. The HST is 18.8 in the brochure and 19.3 on its page; ask the dealer which applies. The comparison below sets WM-8H against Farmer-Helper’s FH-BX42, which both versions run.
KIOTI lists 1,203 lb 24 inches aft of the hitch. WM-8M at 775 lb is under it; WoodMaxx publishes only a 990-lb shipping weight for WM-8H. Add front ballast on a 2,308-lb tractor.
The manual CX2510’s PTO is transmission-driven and the HST’s is live, not independent. Fit an overrunning clutch so the chipper flywheel cannot drive the tractor.
Wallenstein rates BX52S at 22–55 engine hp; the CX2510’s 24.5 is inside on either transmission.
THE SCREEN, WITH ITS LIMITS VISIBLE
No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.
Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.
| Attachment | U.S. CX2510 · 6F/2R manual · 4WD · ROPS · transmission PTO19.3 PTO hp | U.S. CX2510 HST · 2-range HST · 4WD · ROPS · live PTO18.8 PTO hp |
|---|---|---|
| Farmry WCAP5 →412 lb · Net weight WITH PTO shaft, manual Rev1.5 p20 | Preliminary spec matchConfirm implement weight limits, center of gravity, front ballast and stability in your tractor manual. | Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ. |
| Farmry WCAP5 PRO →386 lb · Product weight, current manual Rev1.4 p13; whether PTO shaft is included in this weight is not stated | Needs specification reviewResolve the conflicting published specifications for the exact model revision. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. |
| Woodland Mills WC46 →587 lb · Product weight, 2024 operator manual Rev C p9 | Preliminary spec matchConfirm implement weight limits, center of gravity, front ballast and stability in your tractor manual. | Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ. |
| Woodland Mills WC68 →747 lb · Product weight, 2024 operator manual Rev C p9 | Published mismatch19.3 PTO hp is below the 20 hp minimum. | Published mismatch18.8 PTO hp is below the 20 hp minimum. |
| Woodland Mills TFG55 PTO →346 lb · Product weight, Rev B manual p9 | Needs specification reviewResolve the conflicting published specifications for the exact model revision. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. |
| Woodland Mills WC88 →900 lb · Product weight: 900 lb in current linked 2022 Rev C manual, printed p9; shipping weight is 1,054 lb. The manual does not explicitly identify whether quoted product weight includes the PTO shaft or filled hydraulic oil. | Published mismatch19.3 PTO hp is below the 35 hp minimum. | Published mismatch18.8 PTO hp is below the 35 hp minimum. |
| WoodMaxx WM-8H →Operating weight unconfirmed · Operating weight is unverified in the current official product page and linked manual. The page lists 990 lb SHIPPING weight; do not use it as operating weight. Confirm weight with PTO shaft and a filled hydraulic tank. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. | Published mismatch18.8 PTO hp is below the 19 hp minimum. |
| WoodMaxx WM-8M →775 lb · Product page states 775 lb total weight on the three-point hitch; shaft/fluid inclusion is not explicit. Shipping sections conflict at 950 versus 990 lb. Confirm the delivered operating assembly and shipping revision. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. | Published mismatch18.8 PTO hp is below the 19 hp minimum. |
| WoodMaxx MX-8800 →Operating weight unconfirmed · Complete operating weight is unverified. Current Rev D manual (printed p45 / pdf p46, technical specifications) states approximately 772 lb DRY weight; page separately states 1,004 lb SHIPPING weight. Shaft inclusion in dry weight is not explicit. Do not substitute either figure for a confirmed shaft/oil-inclusive operating load. | Published mismatch19.3 PTO hp is below the 20 hp minimum. | Published mismatch18.8 PTO hp is below the 20 hp minimum. |
| WoodMaxx MX-9900 →Operating weight unconfirmed · Complete operating weight is unverified. Current Rev C manual (printed p42 / pdf p43, technical specifications) states approximately 816 lb DRY weight; page separately states 1,048 lb SHIPPING weight. Shaft inclusion in dry weight is not explicit. Do not substitute either figure for a confirmed shaft/oil-inclusive operating load. | Published mismatch19.3 PTO hp is below the 25 hp minimum. | Published mismatch18.8 PTO hp is below the 25 hp minimum. |
| Farmer-Helper FH-BX42 →Operating weight unconfirmed · Complete operating weight is unverified. Current index-linked manual p2 lists 430 lb net and 450 lb shipping. Current product/series pages instead list 423 lb net and 458 lb shipping. Net-weight shaft/assembly inclusions are unstated; none is substituted for a verified operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| Farmer-Helper FH-BX62S →Operating weight unconfirmed · Complete operating weight is unverified. Current index-linked manual p2: 830 lb net / 860 lb shipping. Current series page: 835 lb net / 915 lb gross. Product page calls 835 lb both total and gross; older product-linked manual p38 gives 797 lb net / 850 lb gross. Shaft/assembly inclusions are unstated, so no reference is used as operating weight. | Published mismatch19.3 PTO hp is below the 25 hp minimum. | Published mismatch18.8 PTO hp is below the 25 hp minimum. |
| Wallenstein BX36S →Operating weight unconfirmed · Official page Total Weight and Jan-2025 manual Weight: 395 lb. Neither states whether the supplied shaft and all operating equipment are included; complete operating and separate shipping weights remain unverified. | Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings. | Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings. |
| Wallenstein BX52S →Operating weight unconfirmed · Official page Total Weight and Jan-2025 manual Weight: 505 lb. Neither states whether the supplied shaft and all operating equipment are included; complete operating and separate shipping weights remain unverified. | Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings. | Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings. |
| Wallenstein BX72S →Operating weight unconfirmed · Current official page Total Weight and Jan-2025 manual Weight: 728 lb. Neither defines complete shaft-inclusive operating mass or a separate shipping weight. Confirm the assembled operating load; do not relabel 728 lb as dry or shipping weight. | Published mismatch24.5 engine hp is below the 50 hp minimum. | Published mismatch24.5 engine hp is below the 50 hp minimum. |
| Wallenstein BX102S →1143 lb · Total Weight 1143 lb (519 kg) on the current page and in the Jan-2025 BX-S manual. Neither says whether the PTO shaft is included; confirm the assembled operating load. | Published mismatch24.5 engine hp is below the 80 hp minimum. | Published mismatch24.5 engine hp is below the 80 hp minimum. |
| Wallenstein BX52RI →845 lb · Total weight 845 lb on the current page and operating weight 845 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included. | Published mismatch24.5 engine hp is below the 30 hp minimum. | Published mismatch24.5 engine hp is below the 30 hp minimum. |
| Wallenstein BX72RI →1300 lb · Total weight 1,300 lb on the current page and operating weight 1,300 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included. | Published mismatch24.5 engine hp is below the 45 hp minimum. | Published mismatch24.5 engine hp is below the 45 hp minimum. |
| Wallenstein BX102RI →1950 lb · Total weight 1,950 lb on the current page and operating weight 1,950 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included. | Published mismatch24.5 engine hp is below the 75 hp minimum. | Published mismatch24.5 engine hp is below the 75 hp minimum. |
With about 19 PTO hp: FH-BX42 or WM-8H?
Read the guide →FIELD GUIDETake the complete setup, not just a horsepower number, to the manufacturer.
Read the guide →FOLLOW THE NUMBERS
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.