KIOTI DK6020SEH · PTO WOOD CHIPPERS
The DK6020SEH’s 44.9 PTO hp is 0.1 under the 45-PTO-hp ceilings of Farmer-Helper FH-BX62S and Farmry WCAP5 Pro. Both list Category 1 only, and KIOTI’s current brochure and web page give the DK6020SEH a Category II hitch, so on the current documents they do not mount. WoodMaxx’s chippers, which list Category 1 and 2, and Wallenstein BX72S do.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test
PUT THIS GUIDE TO WORK
See published mismatches and the checks still needed.
BEST MATCHES FOR THE DK6020SEH
6 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
PTO chipperWoodMaxx
8″ maximum chip diameter, inches · 20 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWoodMaxx
9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWoodMaxx
8″ max. chip diameter · 19 PTO hp minimum; maximum not stated
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWoodMaxx
8″ max. chip diameter · 19 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWallenstein
7″ max. chip diameter · 50–85 engine hp · official U.S. page
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
PTO chipperWallenstein
7″ max. chip diameter · 45–85 engine hp · current U.S. page (manual table: 50–85 hp for the BX72R)
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
THE DECISION IN NUMBERS
Tractor reference: KIOTI DK6020SEH (DK6020HSE), HST; Category II in the brochure and on the web page, Category I in the 2023 manual; 2,716 lb at 24 in. Capacity conditions are manufacturer statements, not throughput tests.
Scroll the table sideways on smaller screens.
| Chipper | Hitch / published requirement | On 44.9 PTO hp | On 57.7 engine hp |
|---|---|---|---|
| Wallenstein BX72RI | 45–85 engine hp (page); hydraulic feed; 7-in. | Engine-rated: PTO hp not used | BX72RI inside |
| Farmer-Helper FH-BX62S | Category 1; 25–45 PTO hp | 0.1 under max; hitch mismatch on Cat 2 | PTO-rated |
| Farmry WCAP5 Pro | Cat 1 / 1N; 15–45 (Cat 1) or 20–50 (Cat 1N) PTO hp | 0.1 under (Cat 1); hitch mismatch on Cat 2 | PTO-rated |
| WoodMaxx MX-8800 / MX-9900 | Cat 1 & 2; 20 / 25 PTO hp minimum; full capacity at “50+ HP” | Inside; 5.1 short of 50 on PTO | Over 50 if engine-based |
| WoodMaxx WM-8M / WM-8H | Cat 1 & 2; 19 PTO hp minimum; WM-8M full at 50+ PTO | Inside; 5.1 short of 50 | PTO-rated |
| Wallenstein BX72S | Cat I & II (page), Cat I (manual); 50–85 engine hp | Engine-rated | Inside (+7.7) |
| Woodland Mills WC88 / WC68 | Category 1; 35 / 20–50 PTO hp | Inside on power; hitch mismatch on Cat 2 | PTO-rated |
| Wallenstein BX52S | Category I; 22–55 engine hp | Hitch mismatch | 2.7 over |
| Farmry WCAP5 | Cat I/II; 15–45 engine hp | Engine-rated | 12.7 over: excluded |
KIOTI’s September 2025 brochure lists the DK6020SEH as Category II and the smaller DK20SE models as Category I; the current DK6020HSE web page agrees. The 2023 U.S. manual lists Category I for all four. This site records Category 2. If the tractor on offer has Category 1 lower-link ends, the Category 1 list below applies, subject to power.
Betstco’s current FH-BX62S manual gives 25–45 PTO hp, and Farmry’s WCAP5 Pro manual gives 15–45 for Category 1. At 44.9, the DK6020SEH is inside both by 0.1, which is not a margin to rely on without the maker’s confirmation. WCAP5 Pro’s Cat 1N range (20–50) has more room.
WoodMaxx lists MX-8800 from 20 PTO hp and MX-9900 from 25, with self-contained hydrostatic feeds, and ties full capacity to “50+ HP” without naming the basis. WM-8M and WM-8H start at 19 PTO hp. All list Category 1 and 2. The comparison below sets FH-BX62S against MX-8800.
Wallenstein rates BX72S at 50–85 engine hp; the DK6020SEH is inside by 7.7. Its page lists Category I and II mounting, its January 2025 manual Category I. Lift is 2,716 lb at 24 inches; BX72S (728 lb) and MX-8800 (about 772 lb dry) are well under.
Wallenstein’s current pages rate the 7-inch BX72RI (45–85 engine hp, Category I and II). Two hydraulic rollers pull material in at a set rate, and P3 PULSE reverses them when the rotor slows; they need 3–6 gpm from a rear remote or Wallenstein’s PTO-driven power pack. The KIOTI DK6020SEH’s 57.7 engine hp is inside the BX72RI’s range on both the page and the manual. Its published lift at 24 inches, 2,716 lb, carries the 1,300-lb BX72RI with 1,416 lb to spare. Wallenstein lists no price; ask a dealer.
THE SCREEN, WITH ITS LIMITS VISIBLE
No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.
Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.
| Attachment | U.S. DK6020SEH · 3-range HST · 4WD · ROPS · independent PTO44.9 PTO hp |
|---|---|
| Farmry WCAP5 →412 lb · Net weight WITH PTO shaft, manual Rev1.5 p20 | Published mismatch57.7 engine hp exceeds the published 45 hp range. |
| Farmry WCAP5 PRO →386 lb · Product weight, current manual Rev1.4 p13; whether PTO shaft is included in this weight is not stated | Published mismatchThe attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface. |
| Woodland Mills WC46 →587 lb · Product weight, 2024 operator manual Rev C p9 | Published mismatch44.9 PTO hp exceeds the published 30 hp range. |
| Woodland Mills WC68 →747 lb · Product weight, 2024 operator manual Rev C p9 | Published mismatchThe attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface. |
| Woodland Mills TFG55 PTO →346 lb · Product weight, Rev B manual p9 | Published mismatch44.9 PTO hp exceeds the published 30 hp range. |
| Woodland Mills WC88 →900 lb · Product weight: 900 lb in current linked 2022 Rev C manual, printed p9; shipping weight is 1,054 lb. The manual does not explicitly identify whether quoted product weight includes the PTO shaft or filled hydraulic oil. | Published mismatchThe attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface. |
| WoodMaxx WM-8H →Operating weight unconfirmed · Operating weight is unverified in the current official product page and linked manual. The page lists 990 lb SHIPPING weight; do not use it as operating weight. Confirm weight with PTO shaft and a filled hydraulic tank. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| WoodMaxx WM-8M →775 lb · Product page states 775 lb total weight on the three-point hitch; shaft/fluid inclusion is not explicit. Shipping sections conflict at 950 versus 990 lb. Confirm the delivered operating assembly and shipping revision. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. |
| WoodMaxx MX-8800 →Operating weight unconfirmed · Complete operating weight is unverified. Current Rev D manual (printed p45 / pdf p46, technical specifications) states approximately 772 lb DRY weight; page separately states 1,004 lb SHIPPING weight. Shaft inclusion in dry weight is not explicit. Do not substitute either figure for a confirmed shaft/oil-inclusive operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| WoodMaxx MX-9900 →Operating weight unconfirmed · Complete operating weight is unverified. Current Rev C manual (printed p42 / pdf p43, technical specifications) states approximately 816 lb DRY weight; page separately states 1,048 lb SHIPPING weight. Shaft inclusion in dry weight is not explicit. Do not substitute either figure for a confirmed shaft/oil-inclusive operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| Farmer-Helper FH-BX42 →Operating weight unconfirmed · Complete operating weight is unverified. Current index-linked manual p2 lists 430 lb net and 450 lb shipping. Current product/series pages instead list 423 lb net and 458 lb shipping. Net-weight shaft/assembly inclusions are unstated; none is substituted for a verified operating load. | Published mismatchThe attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface. |
| Farmer-Helper FH-BX62S →Operating weight unconfirmed · Complete operating weight is unverified. Current index-linked manual p2: 830 lb net / 860 lb shipping. Current series page: 835 lb net / 915 lb gross. Product page calls 835 lb both total and gross; older product-linked manual p38 gives 797 lb net / 850 lb gross. Shaft/assembly inclusions are unstated, so no reference is used as operating weight. | Published mismatchThe attachment’s listed hitch categories do not overlap the tractor’s documented Category 2 interface. |
| Wallenstein BX36S →Operating weight unconfirmed · Official page Total Weight and Jan-2025 manual Weight: 395 lb. Neither states whether the supplied shaft and all operating equipment are included; complete operating and separate shipping weights remain unverified. | Published mismatch57.7 engine hp exceeds the published 30 hp range. |
| Wallenstein BX52S →Operating weight unconfirmed · Official page Total Weight and Jan-2025 manual Weight: 505 lb. Neither states whether the supplied shaft and all operating equipment are included; complete operating and separate shipping weights remain unverified. | Published mismatch57.7 engine hp exceeds the published 55 hp range. |
| Wallenstein BX72S →Operating weight unconfirmed · Current official page Total Weight and Jan-2025 manual Weight: 728 lb. Neither defines complete shaft-inclusive operating mass or a separate shipping weight. Confirm the assembled operating load; do not relabel 728 lb as dry or shipping weight. | Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings. |
| Wallenstein BX102S →1143 lb · Total Weight 1143 lb (519 kg) on the current page and in the Jan-2025 BX-S manual. Neither says whether the PTO shaft is included; confirm the assembled operating load. | Published mismatch57.7 engine hp is below the 80 hp minimum. |
| Wallenstein BX52RI →845 lb · Total weight 845 lb on the current page and operating weight 845 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included. | Published mismatch57.7 engine hp exceeds the published 55 hp range. |
| Wallenstein BX72RI →1300 lb · Total weight 1,300 lb on the current page and operating weight 1,300 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included. | Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings. |
| Wallenstein BX102RI →1950 lb · Total weight 1,950 lb on the current page and operating weight 1,950 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included. | Published mismatch57.7 engine hp is below the 75 hp minimum. |
My tractor has 44.9 PTO hp and may have a Category 2 hitch: FH-BX62S or MX-8800?
Read the guide →FIELD GUIDETake the complete setup, not just a horsepower number, to the manufacturer.
Read the guide →FOLLOW THE NUMBERS
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.