acreage.EQUIPMENT
Compare0Find equipment

KIOTI NS5310H · PTO WOOD CHIPPERS

KIOTI NS5310H wood chippers: 41.8 or 36.6 PTO hp decides WC68 at full feed

KIOTI’s brochure gives the NS5310H 41.8 PTO hp; its web page gives 36.6, the figure for the smaller NS4710. Woodland Mills ties full 6-inch logs at full feed in WC68 to over 40 PTO hp, so the brochure figure meets that condition by 1.8 and the web figure misses it by 3.4. On engine power, the 50.3-hp rating clears Wallenstein BX72S’s minimum by 0.3.

See the best matchesAll NS5310H attachments

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

PUT THIS GUIDE TO WORK

Compare chippers for this tractor

See published mismatches and the checks still needed.

KIOTI NS5310H compact tractor
Manufacturer photo · KIOTI
PTO wood chippers at work

BEST MATCHES FOR THE NS5310H

Chippers to shortlist.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details
Wallenstein BX72S PTO wood chipperPTO chipper

Wallenstein

BX72S

7″ max. chip diameter · 50–85 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details

7 more possible options in the full comparison table.

6 ruled out by published specs

THE DECISION IN NUMBERS

Chipper screens at 41.8 (brochure) / 36.6 (web) PTO hp and 50.3 gross engine hp

Tractor reference: KIOTI NS5310H (HST only), brochure (September 2025), web page and 2021 manual; Category 1; 2,493 lb at 24 in. (manual; brochure and web 2,940). Capacity conditions are manufacturer statements, not throughput tests.

Scroll the table sideways on smaller screens.

ChipperPublished requirementBrochure (41.8) / web (36.6)On 50.3 engine hp
Woodland Mills WC6820–50 PTO hp; over 40 for full 6-inch at full feedMeets the condition (+1.8) / misses it (−3.4)PTO-rated
Farmry WCAP5 Pro (Cat 1) / FH-BX62S15–45 / 25–45 PTO hpInside (3.2 / 8.4 under max)PTO-rated
Woodland Mills WC8835 PTO hp minimum; over 60 for full 8-inch+6.8 / +1.6PTO-rated
Wallenstein BX72S50–85 engine hpEngine-rated0.3 above minimum
Wallenstein BX52S22–55 engine hpEngine-ratedInside (4.7 under max)
Wallenstein BX52RI / BX72RI30–55 / 45–85 engine hp (page); hydraulic feed; 5-in. / 7-in.Engine-rated: PTO hp not usedBX52RI inside, BX72RI inside (0.3 above the manual’s 50)
Farmry WCAP515–45 engine hpEngine-rated5.3 over: excluded
WoodMaxx WM-8M / MX-990019 / 25 PTO hp minimum; full capacity at 50+Inside; short of 50PTO-rated
Woodland Mills WC46 / TFG55; Wallenstein BX36SUp to 30 PTO hp; 12–30 engine hpExcludedExcluded
Sources for this decision table (17)

Two PTO figures, 5.2 hp apart

The September 2025 brochure lists the NS5310H at 50.3 gross engine hp and 41.8 PTO hp. The current NS5310H web page lists 50.3 and 36.6, the same PTO figure as its NS4710 and NS4710H pages. The 2021 manual gives no per-model PTO figure. This site uses the brochure’s 41.8 and shows 36.6 beside it.

WC68 at full feed

Woodland Mills rates WC68 at 20–50 PTO hp, which both figures are inside, and ties full 6-inch logs at full feed to over 40. The brochure figure meets that by 1.8; the web figure misses it by 3.4. If 6-inch material is routine, get the dealer’s PTO figure. Farmry’s gravity-feed WCAP5 Pro, rated to 45 PTO hp on Category 1, is inside on both; the comparison below sets the two side by side.

BX72S by 0.3 hp

Wallenstein rates BX72S at 50–85 engine hp. The NS5310H is rated 50.3 gross hp in KIOTI’s brochure, web page and manual. That is inside by 0.3 on KIOTI’s gross figure; neither maker says whether it means gross or net. BX52S (22–55) is inside by 4.7 at the top. Farmry WCAP5 (to 45) is out.

Lift and hitch

The NS5310H is Category 1 in every KIOTI source. Its web page lists 2,940 lb lift, as does the brochure; the manual gives 2,493 lb at 24 inches and 2,940 at the lift point. WC68 is 747 lb in its manual and WCAP5 Pro 386 lb, both well under either rating.

Wallenstein hydraulic-feed BXR chippers

Wallenstein’s current pages rate the 5-inch BX52RI (30–55 engine hp, Category I) and the 7-inch BX72RI (45–85 engine hp, Category I and II). Two hydraulic rollers pull material in at a set rate, and P3 PULSE reverses them when the rotor slows; they need 3–6 gpm from a rear remote or Wallenstein’s PTO-driven power pack. The KIOTI NS5310H’s 50.3 engine hp is inside the BX52RI’s range on both the page and the manual. It is inside the BX72RI’s range on both the page and the manual. Its published lift at 24 inches, 2,493 lb, carries the 1,300-lb BX72RI with 1,193 lb to spare. Wallenstein lists no price; ask a dealer.

THE SCREEN, WITH ITS LIMITS VISIBLE

Compare each configuration.

No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.

Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.

AttachmentU.S. NS5310H · 3-range HST · 4WD · ROPS · independent PTO41.8 PTO hp
Farmry WCAP5 →412 lb · Net weight WITH PTO shaft, manual Rev1.5 p20Published mismatch50.3 engine hp exceeds the published 45 hp range.
Farmry WCAP5 PRO →386 lb · Product weight, current manual Rev1.4 p13; whether PTO shaft is included in this weight is not statedNeeds specification reviewResolve the conflicting published specifications for the exact model revision.
Woodland Mills WC46 →587 lb · Product weight, 2024 operator manual Rev C p9Published mismatch41.8 PTO hp exceeds the published 30 hp range.
Woodland Mills WC68 →747 lb · Product weight, 2024 operator manual Rev C p9Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Woodland Mills TFG55 PTO →346 lb · Product weight, Rev B manual p9Published mismatch41.8 PTO hp exceeds the published 30 hp range.
Woodland Mills WC88 →900 lb · Product weight: 900 lb in current linked 2022 Rev C manual, printed p9; shipping weight is 1,054 lb. The manual does not explicitly identify whether quoted product weight includes the PTO shaft or filled hydraulic oil.Needs specification reviewResolve the conflicting published specifications for the exact model revision.
WoodMaxx WM-8H →Operating weight unconfirmed · Operating weight is unverified in the current official product page and linked manual. The page lists 990 lb SHIPPING weight; do not use it as operating weight. Confirm weight with PTO shaft and a filled hydraulic tank.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
WoodMaxx WM-8M →775 lb · Product page states 775 lb total weight on the three-point hitch; shaft/fluid inclusion is not explicit. Shipping sections conflict at 950 versus 990 lb. Confirm the delivered operating assembly and shipping revision.Needs specification reviewResolve the conflicting published specifications for the exact model revision.
WoodMaxx MX-8800 →Operating weight unconfirmed · Complete operating weight is unverified. Current Rev D manual (printed p45 / pdf p46, technical specifications) states approximately 772 lb DRY weight; page separately states 1,004 lb SHIPPING weight. Shaft inclusion in dry weight is not explicit. Do not substitute either figure for a confirmed shaft/oil-inclusive operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
WoodMaxx MX-9900 →Operating weight unconfirmed · Complete operating weight is unverified. Current Rev C manual (printed p42 / pdf p43, technical specifications) states approximately 816 lb DRY weight; page separately states 1,048 lb SHIPPING weight. Shaft inclusion in dry weight is not explicit. Do not substitute either figure for a confirmed shaft/oil-inclusive operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
Farmer-Helper FH-BX42 →Operating weight unconfirmed · Complete operating weight is unverified. Current index-linked manual p2 lists 430 lb net and 450 lb shipping. Current product/series pages instead list 423 lb net and 458 lb shipping. Net-weight shaft/assembly inclusions are unstated; none is substituted for a verified operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
Farmer-Helper FH-BX62S →Operating weight unconfirmed · Complete operating weight is unverified. Current index-linked manual p2: 830 lb net / 860 lb shipping. Current series page: 835 lb net / 915 lb gross. Product page calls 835 lb both total and gross; older product-linked manual p38 gives 797 lb net / 850 lb gross. Shaft/assembly inclusions are unstated, so no reference is used as operating weight.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
Wallenstein BX36S →Operating weight unconfirmed · Official page Total Weight and Jan-2025 manual Weight: 395 lb. Neither states whether the supplied shaft and all operating equipment are included; complete operating and separate shipping weights remain unverified.Published mismatch50.3 engine hp exceeds the published 30 hp range.
Wallenstein BX52S →Operating weight unconfirmed · Official page Total Weight and Jan-2025 manual Weight: 505 lb. Neither states whether the supplied shaft and all operating equipment are included; complete operating and separate shipping weights remain unverified.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
Wallenstein BX72S →Operating weight unconfirmed · Current official page Total Weight and Jan-2025 manual Weight: 728 lb. Neither defines complete shaft-inclusive operating mass or a separate shipping weight. Confirm the assembled operating load; do not relabel 728 lb as dry or shipping weight.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
Wallenstein BX102S →1143 lb · Total Weight 1143 lb (519 kg) on the current page and in the Jan-2025 BX-S manual. Neither says whether the PTO shaft is included; confirm the assembled operating load.Published mismatch50.3 engine hp is below the 80 hp minimum.
Wallenstein BX52RI →845 lb · Total weight 845 lb on the current page and operating weight 845 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
Wallenstein BX72RI →1300 lb · Total weight 1,300 lb on the current page and operating weight 1,300 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
Wallenstein BX102RI →1950 lb · Total weight 1,950 lb on the current page and operating weight 1,950 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included.Published mismatch50.3 engine hp is below the 75 hp minimum.
GO DEEPER

Farmry WCAP5 Pro vs Woodland Mills WC68: gravity feed to 45 PTO hp or hydraulic feed with a 40-hp full-feed line

My tractor has 36–42 PTO hp: WCAP5 Pro or WC68?

Read the guide →FIELD GUIDE

Before-you-buy checklist

Take the complete setup, not just a horsepower number, to the manufacturer.

Read the guide →

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. KIOTI NS Series brochure (PDF created September 12, 2025)PDF p12 Specifications: Engine Gross, PTO hp, 3-point hitch, Maximum Lifting Capacity* (@ 24 in. aft of hitch), width, weight
  2. KIOTI NS5310H current U.S. product pageFull Specs: Power, PTO Power, Lift Capacity, Hitch Category, Width, Weight
  3. KIOTI NS ROPS owner’s manual NS-ROPS-OM-ENGLISH-210916PDF pp47–49 (printed 3-3 to 3-5): engine gross power, single Rated PTO Power entry, Category I, 2,493 lb @24 in. / 2,940 lb @lift point; PDF pp52–54: implement limitations
  4. Woodland Mills WC68 official product pageCapacity, including full-diameter/full-infeed-speed condition; price
  5. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sectionsPrinted p9 product weight (747 lb); p12 Cat 1 and PTO range
  6. Farmry WCAP5 PRO operator manual, Rev 1.4Printed p21: 15–45 PTO HP for Category 1; p22: 20–50 PTO HP for Cat 1N
  7. Farmry official product specificationsTechnical table: 15–45 HP without basis; gravity feed; marketing text mentioning Category 2
  8. Current index-linked Farmer-Helper FH-BX42 & 62 manualPrinted p2 / PDF p3: 25 minimum and 45 Max PTO HP
  9. Woodland Mills WC88 official U.S. page35–100+ PTO hp; capacity, including full-diameter/full-speed condition; hydraulic infeed; price
  10. Wallenstein BX72S official U.S. pageEngine HP Range; Mounting System (Cat I and II); Total Weight; Discharge Chute Height
  11. Wallenstein BX-S operator manual Z97085_En, Rev Jan-2025Printed/PDF pp14, 18 and 40: PTO 540 or 1000 rpm, mounting (Cat I), capacity and opening, weight
  12. Wallenstein BX52S official U.S. pageEngine HP Range
  13. Farmry WCAP5 operator manual, Rev 1.5Printed p19: Engine HP Range 15–45, chipping capacity and 5 × 9-in. opening; p20: mounting (Category I/II), rated 540–1000 rpm, net weight with PTO shaft
  14. WoodMaxx WM-8M official product page19 PTO hp minimum; 50+ PTO hp full capacity
  15. WoodMaxx MX-9900 official product pageHorsepower and full-capacity statements
  16. Woodland Mills WC46 official product page15–30 PTO hp
  17. Wallenstein BX36S official U.S. pageEngine HP Range
  18. Wallenstein BXR Series Operator’s Manual, P3 PULSE V3 (Oct 2022)§10.1 table (headed BX52R/BX72R/BX102R): horsepower range 40–55 / 50–85 / 80–120 hp, hydraulic flow 3–6 / 4–8 gpm, operating weight 845 / 1300 / 1950 lb, mounting; power-pack option
  19. Wallenstein BX52RI current U.S. pageEngine HP Range 30–55; mounting; 5-in. capacity; dual hydraulic roller feed, 3–6 gpm; total weight 845 lb
  20. Wallenstein BX72RI current U.S. pageEngine HP Range 45–85; mounting; 7-in. capacity; dual hydraulic roller feed, 3–6 gpm; total weight 1,300 lb
  21. Farmry official product specifications
  22. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  23. Official FM-78 page: exact hammer variant, price and equipment
  24. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  25. WoodMaxx manual index: Models 2025 to current
  26. BX72S official support page — current operator/setup documents
  27. PTO shaft instructions Z97844_En, Rev Aug-2024 — tractor/quick-hitch sizing
  28. Land Pride FM25 current North American family and model listing
  29. Official FM25 public catalog response — active models, gallery and linked documents
  30. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  31. Official FM25 brochure — printed p12 model table
  32. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  33. Woodland Mills TFG55 PTO official U.S. product page
  34. Woodland Mills TFG55 PTO operator manual, Rev B, 15-Oct-2024 — Printed p9 weight/minimum HP; p11 hitch paragraph; p13 included parts
  35. Official WM-8H product page: power, feed, hitch and price
  36. WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantities
  37. WM-8M manual linked by current WoodMaxx manual index
  38. WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
  39. Official MX-8800 page: power/capacity claims, feed, hitch and current sale price
  40. MX-8800 manual Rev D, September 18, 2026: specifications and setup
  41. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  42. Official current FH-BX42 product page: SKU, USD price and net/shipping references
  43. Official FH-BX42 series page: gravity feed and current-manual link
  44. Manual still linked from product page, Revision 1-3-2018, p38
  45. Betstco official manual index
  46. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  47. Official FH-BX62S series page: self feed and current-manual link
  48. Wallenstein BX36S support — currently linked operator, setup and shaft documents
  49. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  50. Wallenstein BX52S support — currently linked operator, setup and shaft documents
  51. Wallenstein BX102S current U.S. page — engine hp range, capacity, mounting system, weight and accessories
  52. BX102S official support page — current operator and parts documents
  53. BX52RI official support page — operator and parts manuals by serial number
  54. Wallenstein wood chipper lineup — engine hp ranges for R and RI models
  55. BX72RI official support page — operator and parts manuals by serial number
  56. Wallenstein BX102RI current U.S. page — engine hp range, mounting, capacity, hydraulic flow and weight
  57. BX102RI official support page — operator and parts manuals by serial number