acreage.EQUIPMENT
Compare0Find equipment

KIOTI · COMPACT TRACTOR ATTACHMENTS

KIOTI NX4510
Attachments that fit.

The KIOTI NX4510 is the smallest NX: a 45-hp turbocharged three-cylinder with 37.6 PTO hp on the 24x24 synchro shuttle and 33.9 on the NX4510H. Woodland Mills WC88’s 35-hp minimum falls between them, so the transmission decides it. The 45-hp engine sits exactly on Farmry WCAP5’s 45-engine-hp ceiling and 5 hp short of Wallenstein BX72S.

33.9–37.6PTO hp45engine hp1hitch category3,177lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

KIOTI NX4510 compact tractor — representative series photo
Manufacturer photo · KIOTI · representative series photo

PTO WOOD CHIPPERS FOR THE NX4510

Chippers that fit the NX4510.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.

Full chipper guide
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details

7 more possible options in the full comparison table — see all.

6 ruled out by published specs

FLAIL MOWERS FOR THE NX4510

Flail mowers that fit the NX4510.

20 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF125 flail mowerFlail mower

Farmer-Helper

FH-EF125

48″ cutting width, inches · 20–45 PTO hp on the product page; manual lists the 20-PTO-hp minimum and a 45-hp gearbox

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.

$1,632checked November 14, 2026
Check current price at Farmer-Helper
Fit details

14 more possible options in the full comparison table.

3 ruled out by published specs
Scope of this guideU.S. NX4510 · 24x24 synchro shuttle · 4WD · ROPS · independent PTO / U.S. NX4510H · 3-range HST · 4WD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Choose the transmission before the chipper: use 37.6 PTO hp for the synchro shuttle and 33.9 for the HST. Engine-rated attachments use 45 gross hp. KIOTI’s brochure, web page and manual agree on these figures.

  • KIOTI’s September 2025 brochure, current web pages and owner’s manual list 45 gross engine hp and 37.6 (synchro) or 33.9 (HST) PTO hp at 540 rpm.
  • Woodland Mills WC88 (35 PTO hp minimum) is cleared by 2.6 on the synchro tractor and missed by 1.1 on the HST.
  • Farmry WCAP5 (15–45 engine hp) is met exactly at its ceiling; Wallenstein BX72S (50–85 engine hp) is 5 short.
  • Woodland Mills WC46 and TFG55 (up to 30 PTO hp) and Farmry’s LFS flails (to 35) are exceeded on the synchro tractor.
  • Lift is 3,177 lb at 24 inches and 3,538 lb at the lower-link ends; the hitch is Category 1 in every source.
  • The manual’s implement table has rotary-cutter (65 in.) and grooming-mower (72 in.) rows but no flail or chipper row.

Choose the exact configuration.

U.S. NX4510 · 24x24 synchro shuttle · 4WD · ROPS · independent PTO

37.6 PTO hp

Current U.S. KIOTI NX4510 with the 24x24 synchro shuttle, ROPS, from the September 2025 NX brochure, the current NX4510 page and the NX owner’s manual. Base weight 3,978 lb in the brochure and on the web page. Cab models (C suffix) and the NX6010H are not profiled. No model-year or serial cutoff is established.

Engine power
45 hp · 45 hp engine gross power at 2,600 rpm in the September 2025 brochure, owner’s manual and web page; the SAE standard is not named. This is not PTO power.
Rear hitch
Category I
Lift at 24 inches
3,177 lb · 3,177 lb at 24 inches behind and 3,538 lb at the lower-link ends in the owner’s manual; the brochure footnotes 3,177 lb as “@ 24” aft. of hitch” and the web page repeats 3,177 lb.
Lift at link ends
3,538 lb
Hydraulics
16.5 gpm gear-pump capacity (maximum flow rate) on the synchro-shuttle models in the brochure, web page and manual. Steering and implement shares and rear-remote outlet flow are not published. One remote valve standard, one optional.
Pressure
Three-point and rear-remote relief pressure not published in the reviewed sources; the KL6010 loader table lists 2,610.7 psi main relief.
Find attachments for this tractor

U.S. NX4510H · 3-range HST · 4WD · ROPS · independent PTO

33.9 PTO hp

Current U.S. KIOTI NX4510H with the 3-range HST, ROPS, from the September 2025 NX brochure, the current NX4510H page and the NX owner’s manual. Base weight 4,000 lb in the brochure and on the web page. Cab models (C suffix) and the NX6010H are not profiled. No model-year or serial cutoff is established.

Engine power
45 hp · 45 hp engine gross power at 2,600 rpm in the September 2025 brochure, owner’s manual and web page; the SAE standard is not named. This is not PTO power.
Rear hitch
Category I
Lift at 24 inches
3,177 lb · 3,177 lb at 24 inches behind and 3,538 lb at the lower-link ends in the owner’s manual; the brochure footnotes 3,177 lb as “@ 24” aft. of hitch” and the web page repeats 3,177 lb.
Lift at link ends
3,538 lb
Hydraulics
17.9 gpm gear-pump capacity (maximum flow rate) on the HST models in the brochure, web page and manual. Steering and implement shares and rear-remote outlet flow are not published. One remote valve standard, one optional.
Pressure
Three-point and rear-remote relief pressure not published in the reviewed sources; the KL6010 loader table lists 2,610.7 psi main relief.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. KIOTI NX Series brochure (PDF created September 18, 2025)p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
  2. KIOTI NX4510 current U.S. product pageFull Specs: Power, PTO Power, Pump Capacity, Lift Capacity, Hitch Category, Width, Weight
  3. KIOTI NX4510/NX5010/NX5510/NX6010 owner's manual NX-OM-ENGLISH-160425 (listed on kioti.com owner manuals)PDF pp56–61: ROPS synchro and HST specifications (engine gross power, PTO power, Category I, lift 3,177 lb at 24 in. behind and 3,538 lb at lower link end, pump capacity, ROPS weight); PDF p66 (printed 3-20): implement limitations
  4. KIOTI NX4510H current U.S. product pageFull Specs: Power, PTO Power, Pump Capacity, Lift Capacity, Hitch Category, Width, Weight
  5. Farmry official product specifications
  6. Farmry WCAP5 operator manual, Rev 1.5 — Printed pp19–20 specifications; pp30–34 driveline checks
  7. Farmry official product specifications
  8. Farmry WCAP5 PRO operator manual, Rev 1.4 — Printed p13 specifications; pp21–22 conflicting horsepower paragraphs
  9. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  10. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  11. Official U.S. WC88 page: price, capacity and drive system
  12. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  13. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  14. Official FH-BX62S series page: self feed and current-manual link
  15. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  16. Product-linked older manual, Revision 1-3-2018, p38
  17. Betstco official manual index
  18. Wallenstein official U.S. BX52S page — explicit engine band, capacity, RPM label, reference weight and accessories
  19. Wallenstein BX52S support — currently linked operator, setup and shaft documents
  20. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40
  21. PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
  22. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  23. Wallenstein BX72S current U.S. page — engine power, current hitch categories, capacity, accessories and reference mass
  24. BX72S official support page — current operator/setup documents
  25. Land Pride FM25 current North American family and model listing
  26. Official FM25 public catalog response — active models, gallery and linked documents
  27. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  28. Official FM25 brochure — printed p12 model table

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

KIOTI NX4510 wood chippers: WC88 depends on the transmission, WCAP5 sits on its ceiling

The NX4510’s two transmissions sit on either side of Woodland Mills WC88’s 35-PTO-hp minimum: 37.6 on the synchro shuttle, 33.9 on the HST. Its 45 gross engine hp is exactly Farmry WCAP5’s 45-engine-hp ceiling and 5 short of Wallenstein BX72S. WC68, WCAP5 Pro and FH-BX62S are inside on both transmissions.

Read the guide →