acreage.EQUIPMENT
Compare0Find equipment

KIOTI · COMPACT TRACTOR ATTACHMENTS

KIOTI NX5010
Attachments that fit.

The KIOTI NX5010 shares the NX4510’s engine, frame and 3,177-lb lift, rated at 50 gross engine hp, 41.8 PTO hp (synchro shuttle) and 38.9 (HST). The engine figure sits exactly on Wallenstein BX72S’s 50-hp minimum and 1.0 over Land Pride FM2584’s 49. The synchro tractor clears Woodland Mills WC68’s over-40 full-feed condition by 1.8; the HST misses it by 1.1.

38.9–41.8PTO hp50engine hp1hitch category3,177lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

KIOTI NX5010 compact tractor — representative series photo
Manufacturer photo · KIOTI · representative series photo

PTO WOOD CHIPPERS FOR THE NX5010

Chippers that fit the NX5010.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.

Full chipper guide
Wallenstein BX72S PTO wood chipperPTO chipper

Wallenstein

BX72S

7″ max. chip diameter · 50–85 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details

7 more possible options in the full comparison table — see all.

6 ruled out by published specs

FLAIL MOWERS FOR THE NX5010

Flail mowers that fit the NX5010.

18 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide

12 more possible options in the full comparison table — see all.

5 ruled out by published specs
  • Farmry LFS61 — Both engine (50) and PTO (41.8) horsepower exceed the published 35 hp maximum.
  • WoodMaxx FM-54 · Y-blades — 41.8 PTO hp exceeds the published 25 hp range.
  • Farmry LFS45 — Both engine (50) and PTO (41.8) horsepower exceed the published 35 hp maximum.
  • Farmry LFS53 — Both engine (50) and PTO (41.8) horsepower exceed the published 35 hp maximum.
  • Blue Diamond Heavy Duty 403740 — Both engine (50) and PTO (41.8) horsepower are below the published 75 hp minimum.
Scope of this guideU.S. NX5010 · 24x24 synchro shuttle · 4WD · ROPS · independent PTO / U.S. NX5010H · 3-range HST · 4WD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Treat BX72S as a zero-margin pairing that needs Wallenstein’s confirmation, and Farmry WCAP5 (45 engine hp maximum) as out. For WC68 at full feed, the synchro tractor is the one that meets the stated condition.

  • KIOTI lists 50 gross engine hp and 41.8 (synchro) or 38.9 (HST) PTO hp in the brochure, web pages and manual.
  • Wallenstein BX72S (50–85 engine hp) is met exactly; BX52S (22–55) is inside by 5.
  • Farmry WCAP5 (15–45 engine hp) is exceeded by 5; the PTO-rated WCAP5 Pro and FH-BX62S (to 45) are inside.
  • Land Pride FM2584 (49 hp, basis unspecified) is cleared by 1.0 on engine power and missed on PTO power; FM2572 (42) is missed by 0.2 on the synchro PTO figure.
  • WC68’s over-40-PTO-hp full-feed condition is met by the synchro tractor (41.8) and not the HST (38.9).
  • The brochure prints the NX5010’s 3,978 lb with the cab’s 1,969.5 kg; the web page gives 1,804.4 kg.

Choose the exact configuration.

U.S. NX5010 · 24x24 synchro shuttle · 4WD · ROPS · independent PTO

41.8 PTO hp

Current U.S. KIOTI NX5010 with the 24x24 synchro shuttle, ROPS, from the September 2025 NX brochure, the current NX5010 page and the NX owner’s manual. Base weight 3,978 lb in the brochure and on the web page. Cab models (C suffix) and the NX6010H are not profiled. No model-year or serial cutoff is established.

Engine power
50 hp · 50 hp engine gross power at 2,600 rpm in the September 2025 brochure, owner’s manual and web page; the SAE standard is not named. This is not PTO power.
Rear hitch
Category I
Lift at 24 inches
3,177 lb · 3,177 lb at 24 inches behind and 3,538 lb at the lower-link ends in the owner’s manual; the brochure footnotes 3,177 lb as “@ 24” aft. of hitch” and the web page repeats 3,177 lb.
Lift at link ends
3,538 lb
Hydraulics
16.5 gpm gear-pump capacity (maximum flow rate) on the synchro-shuttle models in the brochure, web page and manual. Steering and implement shares and rear-remote outlet flow are not published. One remote valve standard, one optional.
Pressure
Three-point and rear-remote relief pressure not published in the reviewed sources; the KL6010 loader table lists 2,610.7 psi main relief.
Find attachments for this tractor

U.S. NX5010H · 3-range HST · 4WD · ROPS · independent PTO

38.9 PTO hp

Current U.S. KIOTI NX5010H with the 3-range HST, ROPS, from the September 2025 NX brochure, the current NX5010H page and the NX owner’s manual. Base weight 4,000 lb in the brochure and on the web page. Cab models (C suffix) and the NX6010H are not profiled. No model-year or serial cutoff is established.

Engine power
50 hp · 50 hp engine gross power at 2,600 rpm in the September 2025 brochure, owner’s manual and web page; the SAE standard is not named. This is not PTO power.
Rear hitch
Category I
Lift at 24 inches
3,177 lb · 3,177 lb at 24 inches behind and 3,538 lb at the lower-link ends in the owner’s manual; the brochure footnotes 3,177 lb as “@ 24” aft. of hitch” and the web page repeats 3,177 lb.
Lift at link ends
3,538 lb
Hydraulics
17.9 gpm gear-pump capacity (maximum flow rate) on the HST models in the brochure, web page and manual. Steering and implement shares and rear-remote outlet flow are not published. One remote valve standard, one optional.
Pressure
Three-point and rear-remote relief pressure not published in the reviewed sources; the KL6010 loader table lists 2,610.7 psi main relief.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. KIOTI NX Series brochure (PDF created September 18, 2025)p12 Specifications: Engine Gross hp, PTO hp by model and transmission, pump capacity, 3-point hitch category, maximum lift capacity (footnote: @ 24 in. aft of hitch), width, weight
  2. KIOTI NX5010 current U.S. product pageFull Specs: Power, PTO Power, Pump Capacity, Lift Capacity, Hitch Category, Width, Weight
  3. KIOTI NX4510/NX5010/NX5510/NX6010 owner's manual NX-OM-ENGLISH-160425 (listed on kioti.com owner manuals)PDF pp56–61: ROPS synchro and HST specifications (engine gross power, PTO power, Category I, lift 3,177 lb at 24 in. behind and 3,538 lb at lower link end, pump capacity, ROPS weight); PDF p66 (printed 3-20): implement limitations
  4. KIOTI NX5010H current U.S. product pageFull Specs: Power, PTO Power, Pump Capacity, Lift Capacity, Hitch Category, Width, Weight
  5. Farmry official product specifications
  6. Farmry WCAP5 operator manual, Rev 1.5 — Printed pp19–20 specifications; pp30–34 driveline checks
  7. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  8. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  9. Official U.S. WC88 page: price, capacity and drive system
  10. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  11. Official FM-78 page: exact hammer variant, price and equipment
  12. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  13. WoodMaxx manual index: Models 2025 to current
  14. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  15. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  16. Official EFGC series: fixed models and separate hydraulic-offset kits
  17. Official Betstco manual index
  18. Wallenstein BX72S current U.S. page — engine power, current hitch categories, capacity, accessories and reference mass
  19. BX72S official support page — current operator/setup documents
  20. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,26,28,30,40
  21. PTO shaft instructions Z97844_En, Rev Aug-2024 — tractor/quick-hitch sizing
  22. Land Pride FM25 current North American family and model listing
  23. Official FM25 public catalog response — active models, gallery and linked documents
  24. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  25. Official FM25 brochure — printed p12 model table
  26. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  27. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

KIOTI NX5010 wood chippers: exactly on BX72S’s 50-hp minimum, 5 over WCAP5

The NX5010’s 50 gross engine hp is exactly Wallenstein BX72S’s minimum and 5 over Farmry WCAP5’s 45-hp maximum, so between those two engine-rated chippers only BX72S is in range, at zero margin. On PTO power, the synchro shuttle’s 41.8 clears Woodland Mills WC68’s over-40 full-feed condition by 1.8 and the HST’s 38.9 misses it by 1.1.

Read the guide →FIELD GUIDE

KIOTI NX5010 flail mowers: FM2584 by 1 engine hp, FM2572 0.2 short on PTO

Land Pride’s FM25 flails do not name their power basis, and the NX5010 lands on both sides. Its 50 gross engine hp clears FM2584’s 49-hp minimum by 1.0, and its 41.8 synchro PTO hp misses FM2572’s 42 by 0.2. Farmer-Helper FH-EFGC155 and WoodMaxx FM-78, rated on PTO power, are inside on both transmissions.

Read the guide →