Kubota L4802 · FLAIL MOWERS
A stronger tractor can exceed a small mower’s upper limit. The standard 4WD L4802’s 48.4 gross engine hp and 40.5 gear / 39.0 HST PTO hp all exceed the Farmry LFS family’s 35 hp ceiling. The useful next comparisons are the basis-dependent LFP47 range and the wider TMG choices, with their unresolved specifications kept visible.
By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test
PUT THIS GUIDE TO WORK
See published mismatches and the checks still needed.
BEST MATCHES FOR THE L4802
17 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.
Flail mowerFarmry
47.2″ cutting width, inches · 25–45 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerTMG Industrial
60″ cutting width · 30–60 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerTMG Industrial
49″ working cut, inches · 30–60 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
87″ cutting width · 30–85 HP (basis not stated) · official page and manual
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmer-Helper
37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.
Flail mowerFarmer-Helper
41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox
Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.
11 more possible options in the full comparison table.
THE DECISION IN NUMBERS
48.4 gross engine hp; 40.5 DT / 39.0 HST PTO hp. These are specification screens; unknown basis, conflicting data and hydraulic setup remain purchase questions.
Scroll the table sideways on smaller screens.
| Mower | Published bounds | L4802 comparison |
|---|---|---|
| Farmry LFS61 | 15–35 hp, basis unspecified | 48.4 engine and both 40.5/39.0 PTO exceed 35: outside range |
| Farmry LFP47 | 25–45 hp, basis unspecified | 48.4 engine exceeds 45; 40.5/39.0 PTO inside: basis unresolved |
| TMG TFM60 | 30–60 hp; manual max 50 PTO hp | Engine/PTO inside 30–60 and PTO below 50; mass/width conflicts remain |
| TMG TFMS50 | 30–60 hp; manual max 50 PTO hp | Engine/PTO inside selected range and PTO below 50; hydraulic/range checks remain |
LFS61 publishes 15–35 hp. The L4802 exceeds 35 on both gross engine and PTO measures, so resolving those two candidate bases cannot make this an in-range pairing. LFP47’s 25–45 range is different: 48.4 engine hp is above 45, while 40.5/39.0 PTO hp is inside. Keep LFP47 in review until the maker clarifies the governing power basis.
The retained TFM60 and TFMS50 product tables give a 30–60 tractor-hp range without a clear basis, while their manuals add a 50 PTO-hp maximum. L4802 engine and PTO ratings lie inside the table range, and both PTO ratings are below 50. Source conflicts still prevent a settled recommendation: TFM60 has mass/width discrepancies, and TFMS50 has a conflicting range image plus unresolved hydraulic requirements.
Kubota’s standard L4802 minimum-tread overall width is 62.2 inches. Even the TFM60’s nominal 60-inch cut is narrower, and its conflicting width evidence needs resolution before laying out mowing passes. TFMS50’s listed 49-inch cut can move sideways, but side shift does not widen the swath. Measure actual outside tires and the approved offset; this brief does not apply the narrower DTN chassis dimensions to a standard tractor.
Farmry rates the HFS87 at 30–85 hp without saying whether that is PTO or engine power, lists Category I and II, cuts 87 inches and weighs 1,299 lb with the shaft. The Kubota L4802’s 40.5 / 39 PTO hp and 48.4 engine hp are both inside that range, so the basis does not change the result. Its published lift at 24 inches, 2,320 lb, carries that weight with 1,021 lb to spare; check front ballast all the same. Its gearbox rating, 50 hp, is not below this tractor’s PTO power. The 87-inch cut is 3 inches wider than Land Pride’s FM2584. Farmry’s page listed it at $4,499 on November 14, 2026.
Farmer-Helper rates its standard-duty FH-EF mowers by PTO power, all to 45 PTO hp with a 45-hp gearbox: the EF95 (37-inch cut) from 15, the EF105 (41-inch) from 16 and the EF125 (48-inch) from 20. They carry Y-blades for grass and light brush. The Kubota L4802’s 40.5 / 39 PTO hp is inside all three. Its published lift at 24 inches, 2,320 lb, carries even the 390-lb EF125 with 1,930 lb to spare. This tractor has the power for heavier mowers; the FH-EF line suits grass and light growth, not thick brush. Betstco listed them at $1,462, $1,547 and $1,632 on November 14, 2026, with the PTO shaft included.
THE SCREEN, WITH ITS LIMITS VISIBLE
No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.
Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.
| Attachment | DT gear · 8F/8R · 4WD40.5 PTO hp | HST · 3 ranges · 4WD39 PTO hp |
|---|---|---|
| Farmry LFS45 →355 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18 | Published mismatchBoth engine (48.4) and PTO (40.5) horsepower exceed the published 35 hp maximum. | Published mismatchBoth engine (48.4) and PTO (39) horsepower exceed the published 35 hp maximum. |
| Farmry LFS53 →395 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18 | Published mismatchBoth engine (48.4) and PTO (40.5) horsepower exceed the published 35 hp maximum. | Published mismatchBoth engine (48.4) and PTO (39) horsepower exceed the published 35 hp maximum. |
| Farmry LFS61 →421 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18 | Published mismatchBoth engine (48.4) and PTO (40.5) horsepower exceed the published 35 hp maximum. | Published mismatchBoth engine (48.4) and PTO (39) horsepower exceed the published 35 hp maximum. |
| TMG Industrial TMG-TFM60 →650 lb · Product-page operation weight; manual gives conflicting 270 kg (about 595 lb) | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| Farmry LFP47 →464 lb · 464 lb including PTO shaft on the product page; current Rev 1.3 manual lists 210 kg / 463.7 lb. Shipping weight is a separate 671 lb. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| TMG Industrial TFMS50 →660 lb · Product-page operation weight: 660 lb. Manual structure weight: 300 kg (about 661 lb); shaft and fluid inclusion are not explicit. Shipping weight: 770 lb. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| WoodMaxx FM-54 · Y-blades →408 lb · Current 2025-and-newer manual p40 lists 408 lb product weight without stating shaft inclusion. Page instead says 410 lb mower-only plus a 39 lb shaft. Do not treat 408 lb as a verified complete operating assembly; confirm delivered Y-blade weight. Shipping page figure is 500 lb. | Published mismatch40.5 PTO hp exceeds the published 25 hp range. | Published mismatch39 PTO hp exceeds the published 25 hp range. |
| WoodMaxx FM-62H · Hammer blades →860 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 860 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 716 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 860 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly. | Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements. | Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements. |
| WoodMaxx FM-78H · Hammer blades →968 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 968 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 804 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 1000 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly. | Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements. | Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements. |
| WoodMaxx FM-62 · Hammer blades →774 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 774 lb product weight without shaft/oil/packaging inclusion. Page lists 641 lb mower-only plus a 39 lb shaft; shipping is separately labeled 800 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. |
| WoodMaxx FM-78 · Hammer blades →880 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 880 lb product weight without shaft/oil/packaging inclusion. Page lists 710 lb mower-only plus a 39 lb shaft; shipping is separately labeled 900 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. |
| Farmer-Helper FH-EFGC125 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 576 lb “Weight” and 624 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 600 lb “Weight” and 635 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| Farmer-Helper FH-EFGC155 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 741 lb “Weight” and 789 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 720 lb “Weight” and 755 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| WoodMaxx FM-62 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 774 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 641 lb mower-only plus 39 lb shaft and separately 800 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| WoodMaxx FM-78 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 880 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 710 lb mower-only plus 39 lb shaft and separately 900 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| Land Pride FM2560 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 965 lb for the standard unit with a duckfoot rotor; the brochure lists 929 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 222 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| Land Pride FM2572 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,040 lb for the standard unit with a duckfoot rotor; the brochure lists 1,040 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 261 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| Land Pride FM2584 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,236 lb for the standard unit with a duckfoot rotor; the brochure lists 1,168 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 301 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load. | Published mismatchBoth engine (48.4) and PTO (40.5) horsepower are below the published 49 hp minimum. | Published mismatchBoth engine (48.4) and PTO (39) horsepower are below the published 49 hp minimum. |
| Blue Diamond Heavy Duty 403740 →1763 lb · 1,763 lb (800 kg) in the Aug-2025 spec sheet (without PTO) and the Feb-2026 manual p49. Add the PTO shaft for the operating load. | Published mismatchBoth engine (48.4) and PTO (40.5) horsepower are below the published 75 hp minimum. | Published mismatchBoth engine (48.4) and PTO (39) horsepower are below the published 75 hp minimum. |
| Farmry HFS87 →1299 lb · 1,299 lb (589 kg) including PTO shaft on the product page and in the HFS manual Rev 1.6, printed p17. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| Farmer-Helper FH-EF95 →330 lb · 330 lb retained, the heavier of the product page (325 lb) and the FH-EF manual p13 (330 lb); crated 360 lb. Neither says whether the included PTO shaft is counted. | Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission. | Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission. |
| Farmer-Helper FH-EF105 →347 lb · 347 lb retained, the heavier of the product page (342 lb) and the FH-EF manual p13 (347 lb); crated 377 lb. Neither says whether the included PTO shaft is counted. | Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission. | Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission. |
| Farmer-Helper FH-EF125 →390 lb · 390 lb retained, the heavier of the product page (390 lb) and the FH-EF manual p13 (383 lb); crated 438 lb. Neither says whether the included PTO shaft is counted. | Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission. | Needs specification reviewConfirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission. |
Is a wider fixed pass or a narrower hydraulic side shift more useful for my property?
Read the guide →FIELD GUIDETake the complete setup, not just a horsepower number, to the manufacturer.
Read the guide →FOLLOW THE NUMBERS
Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.