Kubota · COMPACT TRACTOR ATTACHMENTS
Standard-width, 4WD L4802 models share a 48.4 gross engine-hp rating, but the PTO delivers 40.5 hp with gears and 39.0 with HST. That difference falls on opposite sides of WC68’s over-40-PTO-hp full-feed condition.
By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test
PTO WOOD CHIPPERS FOR THE L4802
12 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.
PTO chipperWoodland Mills
6″ max. chip diameter · 20–50 PTO hp
Confirm implement weight limits, center of gravity, front ballast and stability in your tractor manual.
PTO chipperWoodland Mills
8″ maximum branch diameter, inches · 35–100+ PTO hp
Resolve the conflicting published specifications for the exact model revision.
PTO chipperFarmry
5″ max. chip diameter · 15–45 PTO hp
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWallenstein
5″ max. chip diameter · 30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
PTO chipperWallenstein
7″ max. chip diameter · 45–85 engine hp · current U.S. page (manual table: 50–85 hp for the BX72R)
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
6 more possible options in the full comparison table — see all.
FLAIL MOWERS FOR THE L4802
17 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.
Flail mowerFarmry
47.2″ cutting width, inches · 25–45 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerTMG Industrial
60″ cutting width · 30–60 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerTMG Industrial
49″ working cut, inches · 30–60 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
87″ cutting width · 30–85 HP (basis not stated) · official page and manual
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmer-Helper
37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.
Flail mowerFarmer-Helper
41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox
Confirm the tractor’s PTO hp is inside the 45-hp limit and above the mower’s minimum on the exact transmission.
11 more possible options in the full comparison table — see all.
DT gear · 8F/8R · 4WD
U.S. L4802, standard-width 4WD DT gear with synchronized shuttle, 8 forward/8 reverse, ROPS configuration. Excludes L4802 2WD F and L4802-Narrow DTN configurations. Serial-specific manual, tire setup, ballast and installed rear valves require separate confirmation.
HST · 3 ranges · 4WD
U.S. L4802, standard-width 4WD three-range HST, ROPS configuration. Excludes L4802 2WD F and L4802-Narrow DTN configurations. Serial-specific manual, tire setup, ballast and installed rear valves require separate confirmation.
The linked sheet labels the system-pressure row “kgf/cm² psi” but prints 180 (17.7) for L4802; these labels and magnitudes do not form a usable psi pair.
Pressure remains unknown. Do not silently relabel or convert the row. Confirm against the serial-specific operator/service information.
FOLLOW THE NUMBERS
Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB
The L4802’s transmission changes a chipper decision that a shared 48.4 engine-hp label hides. Gear delivers 40.5 PTO hp, just above WC68’s over-40-PTO-hp full-feed condition; HST delivers 39.0 and falls below it. Both meet WC88’s minimum, but neither reaches its full-eight-inch/full-feed condition.
Read the guide →FIELD GUIDEA stronger tractor can exceed a small mower’s upper limit. The standard 4WD L4802’s 48.4 gross engine hp and 40.5 gear / 39.0 HST PTO hp all exceed the Farmry LFS family’s 35 hp ceiling. The useful next comparisons are the basis-dependent LFP47 range and the wider TMG choices, with their unresolved specifications kept visible.
Read the guide →