acreage.EQUIPMENT
Compare0Find equipment

LS · COMPACT TRACTOR ATTACHMENTS

LS MT125
Attachments that fit.

The two-range HST MT125 is rated at 24.7 gross engine hp and 17.2 PTO hp. Its manual also sets a 60-inch maximum flail cutting width, so the mower decision cannot be reduced to horsepower. Chippers are not listed in that implement table, making actual operating load, rear geometry and manufacturer guidance especially important.

17.2PTO hp24.7engine hp1hitch category728lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test

LS MT125 compact tractor
Manufacturer photo · LS

PTO WOOD CHIPPERS FOR THE MT125

Chippers that fit the MT125.

7 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details
Wallenstein BX36S PTO wood chipperPTO chipper

Wallenstein

BX36S

3.5″ max. chip diameter · 12–30 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details

1 more possible option in the full comparison table — see all.

12 ruled out by published specs

FLAIL MOWERS FOR THE MT125

Flail mowers that fit the MT125.

5 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details
18 ruled out by published specs
Scope of this guide2-range HST · 4WD · folding ROPS · U.S. MT125 sources. Each configuration below states the model and equipment covered by its sources.

Apply the manual’s width limit before comparing mower power or load.

  • LFS61’s 61-inch cut exceeds the manual limit even though both MT125 horsepower figures overlap its generic 15–35 HP band.
  • FM-54 Y and LFS53 remain below the width ceiling, with different blade, cut-width and weight-documentation questions.
  • Use the 728 lb at 24 inches rating and actual axle loads; the 992 lb end rating does not approve a chipper assembly.

Choose the exact configuration.

2-range HST · 4WD · folding ROPS · U.S. MT125 sources

17.2 PTO hp

U.S. MT125 with two-range HST, selectable 4WD and folding ROPS, based on the current product page, linked MT1 brochure and current-index operator manual 52121611/19. The manual date code is 20240000, establishing only the stated year, not a real month/day or model-year cutoff. No serial applicability range was found. Excludes MT122 power, field-cab assumptions and unverified loader/backhoe combinations.

Engine power
24.7 hp · Gross engine horsepower in the current LS U.S. page and MT1 brochure, rated engine speed 3,000 rpm. The brochure separately publishes 17.2 PTO hp for MT125.
Rear hitch
Category I
Lift at 24 inches
728 lb · Manual p 6-3: 330 kgf / 728 lbf at 24 inches behind the lift point, separate from 450 kgf / 992 lbf at lower link ends. Current product page and brochure corroborate the two measurement positions.
Lift at link ends
992 lb
Manual flail width limit
60 inches maximum cutting width · MT122/MT125 operator manual P/NO 52121611/19, date code 20240000, printed p 4-36 / PDF p 124: Recommended Maximum Specification of Implements, row 4 Flail Mower, maximum cutting width 1,524 mm (60 inches). Current U.S. manual-index download; no serial range stated. Confirm applicability to the actual MT125.
Hydraulics
Open center: 4.6 gpm hydraulic-lift/implement flow and separate 2.1 gpm steering; current page and brochure give 6.7 gpm total. Actual rear-coupler delivery is unverified.
Pressure
Manual p 6-3 prints hydraulic-lift system pressure 12.7–13.2 MPa (1,849–1,920 psi). Retain the printed figures; this is not measured pressure at an installed rear coupler.
Find attachments for this tractor

Where the documents disagree.

Transmission and hitch marketing captions

MT1 brochure PDF p 2 says three HST ranges and 970 lb three-point lift. Its MT125 specification table on p 3 instead gives two ranges and 992 lb at ends / 728 lb at 610 mm, corroborated by the current page and manual.

Use the exact two-range model specifications and explicitly measured lift ratings; retain the caption discrepancy for manufacturer review.

Mid-PTO speed

The current page feature text says 2,000 rpm mid PTO, while its specification table, brochure and manual give 2,500 rpm.

Use the corroborated 2,500 rpm mid specification only for that circuit. This profile’s rear PTO remains 540 rpm; do not mix mid and rear equipment.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Current LS Tractor USA MT125 page — exact HST specifications and options
  2. Current-linked LS U.S. MT1 brochure — PDF p 3 MT125 specification column; p 2 conflicting feature captions
  3. LS MT122/MT125 operator manual 52121611/19, date code 20240000 — pp 3-22, 4-29, 4-36 and 6-1 through 6-4
  4. Farmry official product specifications
  5. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  6. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  7. Farmry official product specifications
  8. Farmry official product specifications
  9. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  10. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  11. Woodland Mills TFG55 PTO official U.S. product page
  12. Woodland Mills TFG55 PTO operator manual, Rev B, 15-Oct-2024 — Printed p9 weight/minimum HP; p11 hitch paragraph; p13 included parts
  13. Official FM-54 page: Y option, displayed price, shaft and weight
  14. FM-54 manual for 2025-and-newer models, p40 specifications
  15. Current manual index: FM-54 under Models 2025 to current
  16. Official current FH-BX42 product page: SKU, USD price and net/shipping references
  17. Official FH-BX42 series page: gravity feed and current-manual link
  18. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  19. Manual still linked from product page, Revision 1-3-2018, p38
  20. Betstco official manual index
  21. Official Betstco FH-EF95 product page — PTO hp range, gearbox, widths, weights, blades and price
  22. Farmer-Helper FH-EF Series Manual (June 2025), p13 Machine Specs
  23. Official Betstco FH-EF standard-duty series page
  24. Official Betstco FH-EF105 product page — PTO hp range, gearbox, widths, weights, blades and price

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

Flail mowers for the LS MT125

The MT125 manual sets a maximum 60-inch flail cutting width. That rules out the 61-inch LFS61 on the documented configuration before the generic horsepower band can be treated as encouraging. The useful comparison is among narrower decks whose blade, power and complete-load evidence still need checking.

Read the guide →FIELD GUIDE

Wood chippers for the LS MT125

The MT125 has enough published PTO output to clear several small-chipper minimums, but its manual does not list chippers in the recommended-implement table. Use that gap to ask a concrete load-and-geometry question. A light-looking shipping or net weight is not a substitute for the complete machine carried behind this subcompact.

Read the guide →