acreage.EQUIPMENT
Compare0Find equipment

LS · COMPACT TRACTOR ATTACHMENTS

LS MT225S
Attachments that fit.

The MT225S has 19.3 PTO hp with three-range HST. That clears a 19-hp chipper minimum by 0.3 but misses a 20-hp minimum by 0.7. Its manual adds a 60-inch flail cutting-width limit and a 1,323 lb lift rating at 24 inches, distinct from the larger hitch-end number on the product page.

19.3PTO hp24.7engine hp1hitch category1,323lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test

LS MT225S compact tractor
Manufacturer photo · LS

PTO WOOD CHIPPERS FOR THE MT225S

Chippers that fit the MT225S.

9 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details

3 more possible options in the full comparison table — see all.

10 ruled out by published specs

FLAIL MOWERS FOR THE MT225S

Flail mowers that fit the MT225S.

5 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details
18 ruled out by published specs
Scope of this guide3-range HST · 4WD · folding ROPS · U.S. MT2S sources. Each configuration below states the model and equipment covered by its sources.

Keep the 19-versus-20 PTO-hp boundary separate from the tractor’s lift and width limits.

  • WM-8H and WM-8M clear the retained 19-PTO-hp minimum, but their feed controls and operating-load evidence differ.
  • FM-62 Y, WC68 and MX-8800 start at 20 PTO hp; rounding 19.3 to a 20-hp class changes the result incorrectly.
  • The brochure’s 48.7-inch width is tied to R1 tires, and rear-remotes availability differs between the manual and current options list.

Choose the exact configuration.

3-range HST · 4WD · folding ROPS · U.S. MT2S sources

19.3 PTO hp

U.S. MT225S / MT2S with three-range HST, 4WD and folding ROPS, using the current product page, its linked MT2S brochure and current-index MT225S manual. The manual base part number is 52129311; some revision/date glyphs are unreadable in the source PDF, and no serial range was found. This is a document-scoped profile, not an asserted year change. Excludes MT225E/HE, XJ2025, field-cab assumptions and unverified installed packages.

Engine power
24.7 hp · Gross engine horsepower in the current LS U.S. MT225S page and linked MT2S brochure, rated at 2,800 rpm. PTO output is separately listed as 19.3 hp.
Rear hitch
Category I
Lift at 24 inches
1,323 lb · Current-index MT225S manual p 6-3 explicitly gives 600 kgf / 1,323 lbf at 24 inches behind the lift point. It separately prints 850 kgf / 1,896 lbf at the ends, an inconsistent conversion; the current page and brochure also publish 1,896 lb at ends. Resolve the end-rating discrepancy instead of changing the 24-inch measurement.
Lift at link ends
1,896 lb
Manual flail width limit
60 inches maximum cutting width · MT225S operator manual P/NO 52129311, revision/date partly unreadable, printed p 4-32 / PDF p 122: Recommended Maximum Specification of Implements, row 4 Flail Mower, maximum cutting width 1,524 mm (60 inches). Current U.S. manual-index download; no serial range stated. Confirm applicability to the actual MT225S.
Hydraulics
Open center: 5.6 gpm hydraulic-lift/implement circuit and 3.7 gpm steering in the manual; current page and brochure publish 9.3 gpm total. Rear-outlet flow is unverified, and remote availability differs between the manual and current options list.
Pressure
Manual p 6-3 gives hydraulic-lift system pressure 15.0 MPa / 2,176 psi. The separate steering circuit is 12 MPa / 1,740 psi; neither proves pressure at an installed rear outlet.
Find attachments for this tractor

Where the documents disagree.

Rear remote availability

Current page and brochure list one optional pair; the page limits it to configurations without a backhoe. Current-index manual p 6-3 labels rear couplers N/A.

Keep installed remotes unknown. Obtain the exact kit and manual applicable to the actual serial; do not infer standard outlets or a retrofit approval.

Link-end lift units

Manual p 6-3 prints 850 kgf and 1,896 lbf in the same end-lift row; these do not convert consistently. Page and brochure repeat 1,896 lb at the ends. The separate 600 kgf / 1,323 lbf at 24 inches is clear.

Retain sourced 1,896 lb end figure with conflict and 1,323 lb at 24 inches on its own basis. Obtain a corrected end rating; do not silently change 850 to another metric number.

Engine suffix and equipment scope

Current page/brochure use 3TNV80F-ZXKLST, while manual p 6-2 says 3TNV80F-ZK; current alternator entry is 40 A versus 50 A in manual p 6-4.

No model-year breakpoint is inferred. Confirm the engine plate, serial and installed equipment; preserve the common 24.7-gross-hp and HST scope.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Current LS Tractor USA MT225S page — exact HST specifications and optional rear outlets
  2. Current-linked LS U.S. MT2S brochure — PDF p 2 MT225S table and R1 dimension scope
  3. LS MT225S operator manual 52129311, revision/date partly unreadable — pp 4-24, 4-32 and 6-1 through 6-4
  4. Farmry official product specifications
  5. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  6. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  7. Farmry official product specifications
  8. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  9. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  10. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  11. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  12. Official WM-8H product page: power, feed, hitch and price
  13. WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantities
  14. WoodMaxx current manual index
  15. Official WM-8M page: configuration, 775 lb hitch weight and price
  16. WM-8M manual linked by current WoodMaxx manual index
  17. WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
  18. Official FM-54 page: Y option, displayed price, shaft and weight
  19. FM-54 manual for 2025-and-newer models, p40 specifications
  20. Official MX-8800 page: power/capacity claims, feed, hitch and current sale price
  21. MX-8800 manual Rev D, September 18, 2026: specifications and setup
  22. Official fixed FM-62 page: exact black/Y option, USD price, blade guidance and conflicts
  23. Current FM-62/62H and FM-78/78H manual: printed pp31,40,45 / PDF pp32,41,46
  24. Official Betstco FH-EF95 product page — PTO hp range, gearbox, widths, weights, blades and price
  25. Farmer-Helper FH-EF Series Manual (June 2025), p13 Machine Specs
  26. Official Betstco FH-EF standard-duty series page
  27. Official Betstco FH-EF105 product page — PTO hp range, gearbox, widths, weights, blades and price

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

Flail mowers for the LS MT225S

The MT225S sits between a 47-inch mower that clears its power range and a 55-inch Y mower whose 20-PTO-hp minimum exceeds the tractor’s 19.3. Its brochure width is 48.7 inches with R1 tires, and the manual caps flail cut at 60 inches. Wider coverage therefore needs more than a rounded horsepower label.

Read the guide →FIELD GUIDE

Wood chippers for the LS MT225S

The MT225S has 19.3 PTO hp: just above the retained 19-hp minimum of the WM-8H and WM-8M, but below the 20-hp minimum of WC68 and MX-8800. This makes feed control and complete operating load more useful comparisons than the largest advertised chip diameter.

Read the guide →