acreage.EQUIPMENT
Compare0Find equipment

LS · COMPACT TRACTOR ATTACHMENTS

LS MT340HC
Attachments that fit.

The LS MT340HC is a hydrostatic cab tractor with 40 gross hp, 32.0 PTO hp, a Category 1 hitch and 1,433 lb of lift at 24 inches. That clears WoodMaxx FM-78’s 30-hp minimum by 2 and is over the 30-hp chipper ceilings.

32PTO hp40engine hp1hitch category1,433lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 13, 2026 · Specification research, not a field test

LS MT340HC hub: LS MT3 Series compact tractor at work (representative photo; exact model not identified)
Manufacturer photo · LS Tractor · representative series photo

PTO WOOD CHIPPERS FOR THE MT340HC

Chippers that fit the MT340HC.

11 of 19 pto wood chippers we track pass the published power, hitch and speed screen. “Specs line up” cards come first.

Full chipper guide
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details

5 more possible options in the full comparison table — see all.

8 ruled out by published specs

FLAIL MOWERS FOR THE MT340HC

Flail mowers that fit the MT340HC.

19 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide

13 more possible options in the full comparison table — see all.

4 ruled out by published specs
Scope of this guideU.S. MT340HC · 3-range HST · cab · independent PTO. Each configuration below states the model and equipment covered by its sources.

Woodland Mills WC68, Farmry WCAP5 and WCAP5 Pro, WoodMaxx’s chippers, Farmer-Helper FH-BX and Wallenstein BX52S screen for chipping. WoodMaxx FM-62 and FM-78, Farmer-Helper FH-EFGC, TMG and Farmry LFP47 screen for mowing; Farmry LFS and Land Pride FM2560 depend on their hp basis.

  • Page and manual: 40 gross hp (29.8 kW), 32.0 PTO hp, HST, cab.
  • WoodMaxx FM-78 (30 PTO hp): 2 over.
  • Woodland Mills WC46 and TFG55 (to 30): 2 over.
  • Woodland Mills WC88 (35): 3 short.
  • Land Pride FM2560 (33 hp): engine inside; PTO 1 short.
  • Lift: 1,433 lb at 24 inches (owner manual).

Choose the exact configuration.

U.S. MT340HC · 3-range HST · cab · independent PTO

32 PTO hp

Current U.S. LS MT340HC (cab, 4WD, three-range hydrostatic), MT3 Series, from the current model page and the September 2025 MT335/MT340 owner manual. 3,661 lb without ballast on the page.

Engine power
40 hp · 40 gross engine hp at 2,600 rpm on the current model page (“Engine HP (Gross)”); the September 2025 owner manual lists 29.8 kW at 2,600 rpm. This is not PTO power.
Rear hitch
Category 1 (“CAT.1, in conformity with ISO 730:2014” in the owner manual; CAT I on the model page). Position control; extendable lower links
Lift at 24 inches
1,433 lb · 1,433 lb (650 kgf) “24" behind lift point” in the September 2025 MT335/MT340 owner manual (p7-4); the model page and 2022 comparison sheet give 1,808 lb at the hitch end only.
Lift at link ends
1,808 lb
Hydraulics
8.2 gpm implement pump on the model page (7.8 gpm / 29.4 LPM rated flow in the manual); 13.7 gpm total with steering on HST models. Two pairs of remote valves listed.
Pressure
16.7 MPa (2,422 psi) system pressure in the September 2025 owner manual (p7-4).
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 13, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. LS Tractor USA MT340HC model pageSpecifications: Engine HP (Gross) 40, PTO HP 32.0, HST 3 ranges, independent 540 PTO, Category CAT I, Hitch Lift capacity (Hitch end) 1,808, total weight 3,661 lb
  2. LS MT335 / MT340 owner manual (PDF created September 8, 2025), linked from LS Tractor USA’s owner-manuals pageChapter 7 Dimension and Specification, p7-4: CAT.1; 16.7 MPa (2,422 psi); lift capacity lower link end 820 kgf (1,808 lbf), 24" behind lift point 650 kgf (1,433 lbf); p7-3 rated power 26.0 / 29.8 kW, F12xR12 mechanical / HST, weights
  3. Farmry official product specifications
  4. Farmry WCAP5 operator manual, Rev 1.5 — Printed pp19–20 specifications; pp30–34 driveline checks
  5. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  6. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  7. TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weight
  8. TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specifications
  9. Official WM-8M page: configuration, 775 lb hitch weight and price
  10. WM-8M manual linked by current WoodMaxx manual index
  11. WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
  12. Official FM-62 page: exact hammer variant, price and equipment
  13. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  14. WoodMaxx manual index: Models 2025 to current
  15. Official FM-78 page: exact hammer variant, price and equipment
  16. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  17. Official FH-BX62S series page: self feed and current-manual link
  18. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  19. Product-linked older manual, Revision 1-3-2018, p38
  20. Betstco official manual index
  21. Land Pride FM25 current North American family and model listing
  22. Official FM25 public catalog response — active models, gallery and linked documents
  23. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  24. Official FM25 brochure — printed p12 model table
  25. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  26. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

LS MT340HC wood chippers: WC68 or WM-8M

Woodland Mills rates WC68 at 20–50 PTO hp and WoodMaxx WM-8M from 19, so the LS MT340HC’s 32.0 PTO hp is inside both with room. Farmry WCAP5 and WCAP5 Pro, Farmer-Helper FH-BX and Wallenstein BX52S fit; the 30-hp chippers do not.

Read the guide →FIELD GUIDE

LS MT340HC flail mowers: 2 hp over FM-78’s 30

WoodMaxx rates FM-78 at 30–65 PTO hp, and the LS MT340HC’s 32.0 PTO hp clears that minimum by 2 on a 1,433-lb lift. WoodMaxx FM-62, Farmer-Helper FH-EFGC, TMG and Farmry LFP47 fit; Land Pride FM2560 and Farmry LFS depend on their hp basis.

Read the guide →