acreage.EQUIPMENT
Compare0Find equipment

LS · COMPACT TRACTOR ATTACHMENTS

LS MT355E
Attachments that fit.

The LS MT355E is rated 55 gross hp with 46.7 PTO hp (gear) or 44.0 (MT355HE hydrostatic) and a 2,425-lb lift at 24 inches. The two PTO figures sit either side of the 45-PTO-hp ceiling on Farmry’s WCAP5 Pro, Farmer-Helper’s FH-BX42 and FH-BX62S and WoodMaxx’s FM-62 mowers, so the transmission decides those.

44–46.7PTO hp55engine hp1hitch category2,425lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

LS MT355E hub: LS MT3E-series ROPS tractor with front loader in woods (representative MT3E series photo)
Manufacturer photo · LS · representative series photo

PTO WOOD CHIPPERS FOR THE MT355E

Chippers that fit the MT355E.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full chipper guide
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Gear: Not a matchHST: Possible — confirm details

46.7 PTO hp exceeds the published 45 hp range.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Gear: Not a matchHST: Possible — confirm details

46.7 PTO hp exceeds the published 45 hp range.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details
Woodland Mills WC68 PTO wood chipperPTO chipper

Woodland Mills

WC68

6″ max. chip diameter · 20–50 PTO hp

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$3,450checked November 7, 2026
Check current price at Woodland Mills
Fit details
WoodMaxx WM-8M PTO wood chipperPTO chipper

WoodMaxx

WM-8M

8″ max. chip diameter · 19 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Resolve the conflicting published specifications for the exact model revision.

$3,690checked November 7, 2026
Check current price at WoodMaxx
Fit details

7 more possible options in the full comparison table — see all.

6 ruled out by published specs

FLAIL MOWERS FOR THE MT355E

Flail mowers that fit the MT355E.

18 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide

12 more possible options in the full comparison table — see all.

5 ruled out by published specs
  • Farmry LFS45 — Both engine (55) and PTO (46.7) horsepower exceed the published 35 hp maximum.
  • Farmry LFS53 — Both engine (55) and PTO (46.7) horsepower exceed the published 35 hp maximum.
  • Farmry LFS61 — Both engine (55) and PTO (46.7) horsepower exceed the published 35 hp maximum.
  • WoodMaxx FM-54 · Y-blades — 46.7 PTO hp exceeds the published 25 hp range.
  • Blue Diamond Heavy Duty 403740 — Both engine (55) and PTO (46.7) horsepower are below the published 75 hp minimum.
Scope of this guideU.S. MT355E · gear · 4WD · ROPS · independent PTO / U.S. MT355HE · 3-range HST · 4WD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

On the gear MT355E, shortlist attachments rated past 47 PTO hp: Woodland Mills WC68 and WC88, WoodMaxx’s 8-inch chippers, Wallenstein BX72S, FM-78 and FH-EFGC155. The MT355HE also keeps the 45-hp chippers and FM-62.

  • Page and manual: 55 hp (41.0 kW in the manual); the brochure’s “55 (37.3)” kW figure equals about 50 hp.
  • PTO: 46.7 (MT355E) and 44.0 (MT355HE) in the brochure and current page.
  • WCAP5 Pro, FH-BX42, FH-BX62S and FM-62 (to 45 PTO hp): gear 1.7 over, HST 1.0 under.
  • Wallenstein BX72S (50–85 engine hp) is inside; BX52S (to 55) is met exactly.
  • TMG TFM60/TFMS50 manuals cap tractor power at 50 PTO hp; both versions are under.
  • Manual: Category 1, 2,425 lb at 24 inches; the pages say CAT 2.

Choose the exact configuration.

U.S. MT355E · gear · 4WD · ROPS · independent PTO

46.7 PTO hp

Current U.S. LS MT355E gear tractor with ROPS, from the MT3E brochure, current page and owner manual. 3,724 lb without ballast.

Engine power
55 hp · 55 hp engine gross on the current page and 41.0 kW at 2,600 rpm in the manual; the brochure’s 37.3 kW conversion is about 50 hp (see source conflict). It is not PTO power.
Rear hitch
Category I
Lift at 24 inches
2,425 lb · 2,425 lb at 24 in. behind the lift point in the owner manual's specification table; 2,910 lb at the lower link ends there and on the current product page.
Lift at link ends
2,910 lb
Hydraulics
8.2 gpm implement pump (13.0 gpm total) in the brochure, current page and manual (31.2 L/min).
Pressure
17.5 MPa (2,538 psi) system pressure in the owner manual.
Find attachments for this tractor

U.S. MT355HE · 3-range HST · 4WD · ROPS · independent PTO

44 PTO hp

Current U.S. LS MT355HE hydrostatic tractor with ROPS.

Engine power
55 hp · 55 hp engine gross on the current page; 41.0 kW in the manual. It is not PTO power.
Rear hitch
Category I
Lift at 24 inches
2,425 lb · 2,425 lb at 24 in. behind the lift point in the owner manual's specification table; 2,910 lb at the lower link ends there and on the current product page.
Lift at link ends
2,910 lb
Hydraulics
8.2 gpm implement pump (13.0 gpm total) in the brochure, current page and manual (31.2 L/min).
Pressure
17.5 MPa (2,538 psi) system pressure in the owner manual.
Find attachments for this tractor

Where the documents disagree.

Hitch category

The current MT345E/HE and MT355E/HE pages list “CAT 2” and describe “Category 2 with a hitch lift capacity of 1,808 lbs”. The MT3E brochure lists CAT I and the owner manual “CAT.1, in conformity with ISO 730:2014”; the manual and brochure give 2,910 lb at the link ends, and 1,808 lb is the MT2E’s rating.

Category 1 is recorded from the manual and brochure. Measure the lower-link pins before buying a Category 2 attachment.

Engine power conversion

The MT3E brochure lists the MT355E/HE at “55 (37.3)” hp (kW); 37.3 kW is about 50 hp. The owner manual lists 41.0 kW (about 55 hp) for MT355 and 37.0 kW for the MT350.

55 hp is recorded from the manual and current page; the brochure kW figure appears to be the MT350’s.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. LS MT3E series brochure (PDF created October 3, 2025)p2 specifications: Engine HP (kW), PTO (HP) MT345E 38.2 / MT345HE 36.0 / MT355E 46.7 / MT355HE 44.0, Category (3pt hitch) CAT I, hitch lift capacity 2,910 lb
  2. LS Tractor MT355E/HE current U.S. product pageSpecifications: Engine HP (Gross), PTO HP, Category 3 pt hitch, Hitch Lift capacity (Hitch end), total weight without ballast
  3. LS MT345E/HE, MT350E/HE, MT355E/HE owner manual (PDF modified October 2025)Chapter 6 Dimension and Specification, pp6-2/6-3: rated power 33.5 kW (MT345) and 41.0 kW (MT355) @2,600; CAT.1 (ISO 730:2014); lift 1,320 kgf (2,910 lbf) at lower link end, 1,100 kgf (2,425 lbf) 24 in. behind lift point
  4. Farmry official product specifications
  5. Farmry WCAP5 PRO operator manual, Rev 1.4 — Printed p13 specifications; pp21–22 conflicting horsepower paragraphs
  6. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  7. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  8. Official U.S. WC88 page: price, capacity and drive system
  9. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  10. Official FM-62H page: hammer option, price, equipment and conflicting weights
  11. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41 specifications
  12. WoodMaxx manual index: Models 2025 to current
  13. Official FM-78H page: hammer option, price, equipment and conflicting weights
  14. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  15. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  16. Official EFGC series: fixed models and separate hydraulic-offset kits
  17. Official Betstco manual index
  18. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  19. Official FH-BX62S series page: self feed and current-manual link
  20. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  21. Product-linked older manual, Revision 1-3-2018, p38
  22. Wallenstein BX72S current U.S. page — engine power, current hitch categories, capacity, accessories and reference mass
  23. BX72S official support page — current operator/setup documents
  24. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,26,28,30,40
  25. PTO shaft instructions Z97844_En, Rev Aug-2024 — tractor/quick-hitch sizing
  26. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  27. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

LS MT355E wood chippers: gear is 1.7 hp over the 45-hp chippers

Farmry’s WCAP5 Pro and Farmer-Helper’s FH-BX42 and FH-BX62S stop at 45 PTO hp. The gear MT355E (46.7) is 1.7 over; the MT355HE (44.0) is 1.0 under. On both, Woodland Mills WC68 and WC88, WoodMaxx’s 8-inch chippers and Wallenstein BX72S (50–85 engine hp) fit.

Read the guide →FIELD GUIDE

LS MT355E flail mowers: FM-62 fits the HST, not the gear

WoodMaxx rates its FM-62 mowers to 45 PTO hp. The gear MT355E (46.7) is 1.7 over and the MT355HE (44.0) 1.0 under. FM-78 and Farmer-Helper FH-EFGC155 (to 65) and TMG’s TFM60 and TFMS50 (manual cap 50 PTO hp) fit both versions.

Read the guide →