acreage.EQUIPMENT
Compare0Find equipment

Mahindra · COMPACT TRACTOR ATTACHMENTS

Mahindra 1640
Attachments that fit.

The 1640 Shuttle’s 29.9 PTO hp is the closest any tractor on this site comes to a 30-hp minimum without reaching it. The HST lists 27.7. Both share a 38.7-hp engine, so attachments rated in PTO horsepower and those rated in engine horsepower give very different answers on this tractor.

27.7–29.9PTO hp38.7engine hp1hitch category1,720lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test

Mahindra 1640 compact tractor — representative series photo
Manufacturer photo · Mahindra · representative series photo

PTO WOOD CHIPPERS FOR THE 1640

Chippers that fit the 1640.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full chipper guide
Woodland Mills WC46 PTO wood chipperPTO chipper

Woodland Mills

WC46

4″ max. chip diameter · 15–30 PTO hp

HST: Possible — confirm detailsGear: Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$3,220checked November 7, 2026
Check current price at Woodland Mills
Fit details
Woodland Mills TFG55 PTO PTO wood chipperPTO chipper

Woodland Mills

TFG55 PTO

5″ max. chip diameter · 12–30 PTO hp in table; manual hitch paragraph says 15–30 — resolve before selection

HST: Possible — confirm detailsGear: Possible — confirm details

Resolve the conflicting published specifications for the exact model revision.

$2,415checked November 7, 2026
Check current price at Woodland Mills
Fit details
Woodland Mills WC68 PTO wood chipperPTO chipper

Woodland Mills

WC68

6″ max. chip diameter · 20–50 PTO hp

HST: Possible — confirm detailsGear: Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$3,450checked November 7, 2026
Check current price at Woodland Mills
Fit details
WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

HST: Possible — confirm detailsGear: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Fit details
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

HST: Possible — confirm detailsGear: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

HST: Possible — confirm detailsGear: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details

7 more possible options in the full comparison table — see all.

6 ruled out by published specs

FLAIL MOWERS FOR THE 1640

Flail mowers that fit the 1640.

16 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry LFP47 flail mowerFlail mower

Farmry

LFP47

47.2″ cutting width, inches · 25–45 hp · basis unclear

HST: Possible — confirm detailsGear: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$2,199checked November 7, 2026
Check current price at Farmry
Fit details
Farmry LFS61 flail mowerFlail mower

Farmry

LFS61

61″ cutting width · 15–35 hp · basis unclear

HST: Possible — confirm detailsGear: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$1,899checked November 6, 2026
Check current price at Farmry
Fit details

10 more possible options in the full comparison table — see all.

7 ruled out by published specs
Scope of this guideU.S. HST · 3 range · open station · live PTO with o/r clutch / U.S. 8F/8R synchro shuttle · open station · independent PTO. Each configuration below states the model and equipment covered by its sources.

Identify the transmission, then treat 30-PTO-hp attachments as outside the published range on either 1640. Choose from the 24–25-hp minimum class, check upper limits on small chippers and mowers, and ask makers with an unspecified horsepower basis which figure they mean.

  • Mahindra lists 27.7 PTO hp for the 1640 HST (and HST Cab) and 29.9 for the Shuttle, from a 38.7-hp four-cylinder engine with no named rating standard.
  • The Shuttle is 0.1 hp below the 30-PTO-hp minimum of the FM-78 family; the HST is 2.3 below. No document supports rounding up.
  • WC46 and TFG55 top out at 30 PTO hp: the Shuttle is inside by 0.1 hp. FM-54 Y’s 25-hp maximum and BX36S’s 30-engine-hp maximum are both exceeded.
  • MX-9900, FH-BX62S and FH-EFGC155 start at 25 PTO hp, leaving 2.7 hp (HST) or 4.9 (Shuttle) of margin.
  • TFM60, TFMS50 and FM2560 do not say engine or PTO. On engine power, 38.7 clears their 30 or 33 minimums; on PTO power, neither 1640 does.
  • Lift is 1,720 lb at 24 inches, the same figure Mahindra lists for the smaller 1626 and 1635. Hydraulic total flow differs between the brochure (11.1 gpm) and web table (11.4 gpm).

Choose the exact configuration.

U.S. HST · 3 range · open station · live PTO with o/r clutch

27.7 PTO hp

Mahindra 1640 HST three-range hydrostatic open-station tractor in the 2025 U.S. brochure and current specification table. The 1640 HST Cab lists the same 27.7 PTO hp but 3,627 lb and different height; cab fitment is outside this profile. No model-year or serial cutoff is established.

Engine power
38.7 hp · 38.7 hp (28.9 kW) at 2,400 rpm in Mahindra’s 2025 brochure and current specification table, shared by every 1640 configuration. The rating standard is not named. This is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
1,720 lb · 1,720 lb (780 kg) at 24 inches behind in brochure PDF p5 and the current table, the same figure as the 1626 and 1635. No lift-point figure is published there.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
7.7 gpm main implement pump; total 11.1 gpm in the brochure or 11.4 gpm in the web table (both 41.8 L/min) including 3.4 gpm steering. A single rear remote is optional; no installed circuit or outlet flow is assumed.
Pressure
Not published in the reviewed brochure or specification table. Obtain relief pressure and installed-remote details from the dealer and operator manual.
Find attachments for this tractor

U.S. 8F/8R synchro shuttle · open station · independent PTO

29.9 PTO hp

Mahindra 1640 Shuttle (8F/8R, synchromesh on forward-reverse shuttle, constant mesh on gear shift) open-station tractor in the 2025 U.S. brochure and current specification table. No model-year or serial cutoff is established.

Engine power
38.7 hp · 38.7 hp (28.9 kW) at 2,400 rpm in Mahindra’s 2025 brochure and current specification table, shared by every 1640 configuration. The rating standard is not named. This is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
1,720 lb · 1,720 lb (780 kg) at 24 inches behind in brochure PDF p5 and the current table, the same figure as the 1626 and 1635. No lift-point figure is published there.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
7.7 gpm main implement pump; total 11.1 gpm in the brochure or 11.4 gpm in the web table (both 41.8 L/min) including 3.4 gpm steering. A single rear remote is optional; no installed circuit or outlet flow is assumed.
Pressure
Not published in the reviewed brochure or specification table. Obtain relief pressure and installed-remote details from the dealer and operator manual.
Find attachments for this tractor

Where the documents disagree.

Hydraulic total flow

The 2025 brochure lists 11.1 gpm (41.8 L/min) total pump output for the 1640; the current web specification table lists 11.4 gpm (41.8 L/min).

Both cite 41.8 L/min, which is about 11.0 gpm, so the brochure’s 11.1 is retained as the consistent figure. Neither is a rear-outlet flow. Main implement pump output (7.7 gpm) agrees in both.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Mahindra USA 1600 Series brochure, Rev 09022025: PDF p5 tractor specifications (engine, PTO type and PTO hp by transmission, 3-point lift at 24 in., hydraulics, weight)PDF p5, Tractor Specifications: 1640 Shuttle / HST / HST Cab columns
  2. Mahindra USA 1600 Series page: per-model specification table and model summary cardsSpecifications table: 1640 HST / HST Cab / Shuttle columns
  3. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  4. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  5. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  6. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  7. Official LFP47 product page: configuration, weight and price
  8. LFP Series operator manual, Rev 1.3, printed pp17–20
  9. Official FM-62 page: exact hammer variant, price and equipment
  10. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  11. WoodMaxx manual index: Models 2025 to current
  12. Official FM-78 page: exact hammer variant, price and equipment
  13. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  14. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  15. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  16. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  17. Official EFGC series: fixed models and separate hydraulic-offset kits
  18. Official Betstco manual index
  19. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  20. Official FH-BX62S series page: self feed and current-manual link
  21. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  22. Product-linked older manual, Revision 1-3-2018, p38

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

Mahindra 1640 wood chippers: the 25-hp class with room, the 35-hp class out of reach

A 1640 has 2.7 to 4.9 hp of margin over 25-PTO-hp chipper minimums, the most of any 1600 Series tractor. It is still 5.1 hp or more short of WC88’s 35-hp minimum. Its 38.7-hp engine rules out Wallenstein’s BX36S, and the Shuttle sits just 0.1 hp under the 30-hp ceiling of the smallest Woodland Mills chippers.

Read the guide →FIELD GUIDE

Mahindra 1640 flail mowers: 0.1 hp short of the 30-hp class

The 1640 Shuttle’s 29.9 PTO hp falls 0.1 hp short of the 30-PTO-hp minimum on WoodMaxx’s FM-78 family, and the HST is 2.3 short. Below that line the shortlist is broad: the 55–60-inch hammer class starts at 24–25 hp, and both transmissions exceed FM-54 Y’s 25-hp maximum. Mowers that do not say engine or PTO are where the 1640’s answer changes.

Read the guide →