Flail mowerWoodMaxx
FM-62 · Hammer blades
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Resolve the conflicting published specifications for the exact model revision.
Mahindra 1640 · FLAIL MOWERS
The 1640 Shuttle’s 29.9 PTO hp falls 0.1 hp short of the 30-PTO-hp minimum on WoodMaxx’s FM-78 family, and the HST is 2.3 short. Below that line the shortlist is broad: the 55–60-inch hammer class starts at 24–25 hp, and both transmissions exceed FM-54 Y’s 25-hp maximum. Mowers that do not say engine or PTO are where the 1640’s answer changes.
By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test
PUT THIS GUIDE TO WORK
See published mismatches and the checks still needed.


BEST MATCHES FOR THE 1640
16 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.
Flail mowerWoodMaxx
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerWoodMaxx
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Confirm rear remotes, hydraulic flow and pressure requirements.
Flail mowerFarmer-Helper
60″ cutting width, inches · 25–65 PTO hp on current page; linked-manual basis/limit conflicts
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
Flail mowerFarmry
47.2″ cutting width, inches · 25–45 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
61″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerTMG Industrial
60″ cutting width · 30–60 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
10 more possible options in the full comparison table.
THE DECISION IN NUMBERS
Tractor reference: 1640 HST 27.7 PTO hp, Shuttle 29.9 PTO hp, 38.7 engine hp (standard unnamed); overall width 62 in. with ag tires, rear track unpublished. No Mahindra manual flail limit was located. Ranges and weights are the retained manufacturer figures.
Scroll the table sideways on smaller screens.
| Mower | Published requirement | Result on PTO hp (HST / Shuttle) | Result on engine hp / note |
|---|---|---|---|
| Farmry HFS87 | 30–85 hp, basis unspecified; Category I/II; 87-in. cut | 2.3 short / 0.1 short | Inside; ask Farmry which hp it means |
| Farmer-Helper FH-EF95 / EF105 / EF125 | 15 / 16 / 20–45 PTO hp; Category I; 37 / 41 / 48-in. cut | Inside | PTO-rated: engine hp not used |
| WoodMaxx FM-78 / FM-78 Y / FM-78H | 30–65 PTO hp; 70-in. cut | 2.3 / 0.1 below: excluded | PTO-rated: excluded |
| WoodMaxx FM-54 Y | 15–25 PTO hp | Exceeds maximum by 2.7 / 4.9: excluded | PTO-rated: excluded |
| WoodMaxx FM-62 hammer / FM-62H | 24–45 PTO hp; 55-in. cut | +3.7 / +5.9 | PTO-rated: inside |
| Farmer-Helper FH-EFGC155 | Page 25–65 PTO hp; manual uses engine hp on hydro tractors | +2.7 / +4.9 on the page | HST hydro: 38.7 engine clears manual rule |
| Farmry LFP47 | 25–45 hp, basis unspecified; 47.2-in. cut | Inside | 38.7 inside |
| Farmry LFS61 | 15–35 hp, basis unspecified | Inside | 38.7 exceeds 35 by 3.7: basis decides |
| TMG TFM60 / TFMS50 | 30–60 hp, basis unspecified; manual 50 PTO hp max | 2.3 / 0.1 below 30 | 38.7 clears 30: basis decides |
| Land Pride FM2560 (hammer) | 33–80 tractor hp, basis unspecified | Below 33 | 38.7 clears 33: basis decides |
WoodMaxx’s current manual lists 30–65 PTO hp for FM-78 with either blade set, and the same range applies to FM-78H. Mahindra prints 29.9 for the 1640 Shuttle in both the brochure and the specification table, and a series paragraph rounds the family to “19-30 PTO hp”. The configuration figure, not the rounded series range, is the one to screen. At 0.1 hp short, the mower is outside its published range unless WoodMaxx confirms otherwise in writing.
Farmry LFS61 (15–35), TMG TFM60 and TFMS50 (30–60) and Land Pride FM2560 (33–80) do not state whether they mean engine or PTO power. With 38.7 engine hp and 27.7 or 29.9 PTO hp, the 1640 is above LFS61’s range on engine power and below the TMG and Land Pride minimums on PTO power. Each answer reverses with the basis, so ask the maker which figure it means before treating either outcome as settled.
FM-62 hammer and FM-62H start at 24 PTO hp, leaving 3.7 or 5.9 hp. FH-EFGC155 lists 25–65 PTO hp on its current page; its Revision 12-12-17 manual uses engine horsepower for hydro tractors, under which the HST’s 38.7 also clears. LFP47’s 25–45 band includes both the PTO and engine figures. These are inside their ranges on any reading; compare cut width, blade type and weight next.
Mahindra lists the 1640’s overall width as 62 inches with ag tires and does not publish rear track. A 60-inch EFGC155 or FM2560, or a 55-inch FM-62, may or may not cover the wheel path depending on offset and actual track. Measure the tractor and confirm the mower’s mounting positions before treating cutting width as coverage.
Farmry rates the HFS87 at 30–85 hp without saying whether that is PTO or engine power, lists Category I and II, cuts 87 inches and weighs 1,299 lb with the shaft. Its 38.7 engine hp is inside, but the 29.9 / 27.7 PTO hp are 0.1 / 2.3 short of 30, so the answer depends on which figure Farmry means; ask before buying. Its published lift at 24 inches, 1,720 lb, carries that weight with 421 lb to spare; check front ballast all the same. Its gearbox rating, 50 hp, is not below this tractor’s PTO power. The 87-inch cut is 3 inches wider than Land Pride’s FM2584. Farmry’s page listed it at $4,499 on November 14, 2026.
Farmer-Helper rates its standard-duty FH-EF mowers by PTO power, all to 45 PTO hp with a 45-hp gearbox: the EF95 (37-inch cut) from 15, the EF105 (41-inch) from 16 and the EF125 (48-inch) from 20. They carry Y-blades for grass and light brush. The Mahindra 1640’s 27.7 / 29.9 PTO hp is inside all three. Its published lift at 24 inches, 1,720 lb, carries even the 390-lb EF125 with 1,330 lb to spare. Betstco listed them at $1,462, $1,547 and $1,632 on November 14, 2026, with the PTO shaft included.
THE SCREEN, WITH ITS LIMITS VISIBLE
No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.
Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.
| Attachment | U.S. HST · 3 range · open station · live PTO with o/r clutch27.7 PTO hp | U.S. 8F/8R synchro shuttle · open station · independent PTO29.9 PTO hp |
|---|---|---|
| Farmry LFS45 →355 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18 | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| Farmry LFS53 →395 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18 | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| Farmry LFS61 →421 lb · Net weight WITH PTO shaft, current LFS manual Rev 1.7 p18 | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| TMG Industrial TMG-TFM60 →650 lb · Product-page operation weight; manual gives conflicting 270 kg (about 595 lb) | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| Farmry LFP47 →464 lb · 464 lb including PTO shaft on the product page; current Rev 1.3 manual lists 210 kg / 463.7 lb. Shipping weight is a separate 671 lb. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| TMG Industrial TFMS50 →660 lb · Product-page operation weight: 660 lb. Manual structure weight: 300 kg (about 661 lb); shaft and fluid inclusion are not explicit. Shipping weight: 770 lb. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| WoodMaxx FM-54 · Y-blades →408 lb · Current 2025-and-newer manual p40 lists 408 lb product weight without stating shaft inclusion. Page instead says 410 lb mower-only plus a 39 lb shaft. Do not treat 408 lb as a verified complete operating assembly; confirm delivered Y-blade weight. Shipping page figure is 500 lb. | Published mismatch27.7 PTO hp exceeds the published 25 hp range. | Published mismatch29.9 PTO hp exceeds the published 25 hp range. |
| WoodMaxx FM-62H · Hammer blades →860 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 860 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 716 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 860 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly. | Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements. | Needs specification reviewConfirm rear remotes, hydraulic flow and pressure requirements. |
| WoodMaxx FM-78H · Hammer blades →968 lb · Current 2025-and-newer manual, printed p40 / PDF p41: 968 lb product weight; shaft/oil/packaging inclusion is unstated. Page instead lists 804 lb mower-only plus a 39 lb shaft. Shipping is separately labeled 1000 lb. Do not treat the manual number as verified complete operating weight; confirm delivered hammer assembly. | Published mismatch27.7 PTO hp is below the 30 hp minimum. | Published mismatch29.9 PTO hp is below the 30 hp minimum. |
| WoodMaxx FM-62 · Hammer blades →774 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 774 lb product weight without shaft/oil/packaging inclusion. Page lists 641 lb mower-only plus a 39 lb shaft; shipping is separately labeled 800 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. | Needs specification reviewResolve the conflicting published specifications for the exact model revision. |
| WoodMaxx FM-78 · Hammer blades →880 lb · Current 2025-and-newer manual printed p40 / PDF p41 lists 880 lb product weight without shaft/oil/packaging inclusion. Page lists 710 lb mower-only plus a 39 lb shaft; shipping is separately labeled 900 lb. Retain these distinct bases and confirm complete operating weight for the delivered hammer assembly. | Published mismatch27.7 PTO hp is below the 30 hp minimum. | Published mismatch29.9 PTO hp is below the 30 hp minimum. |
| Farmer-Helper FH-EFGC125 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 576 lb “Weight” and 624 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 600 lb “Weight” and 635 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| Farmer-Helper FH-EFGC155 · Hammer blades →Operating weight unconfirmed · Complete operating weight is unverified. Current page: 741 lb “Weight” and 789 lb “Crated Weight.” Linked Rev 12-12-17 manual p23: 720 lb “Weight” and 755 lb crated. Product-weight shaft/oil/assembly inclusions are unstated. Keep these separate; do not use crate weight or silently choose one product figure as an operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| WoodMaxx FM-62 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 774 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 641 lb mower-only plus 39 lb shaft and separately 800 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. | Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load. |
| WoodMaxx FM-78 · Y-blades →Operating weight unconfirmed · Complete Y-configuration operating weight is unverified. Current manual p40 gives 880 lb generic product weight without shaft/oil or blade-specific inclusion. Page gives 710 lb mower-only plus 39 lb shaft and separately 900 lb shipping. These bases conflict or lack scope; none substitutes for an assembled Y operating load. | Published mismatch27.7 PTO hp is below the 30 hp minimum. | Published mismatch29.9 PTO hp is below the 30 hp minimum. |
| Land Pride FM2560 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 965 lb for the standard unit with a duckfoot rotor; the brochure lists 929 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 222 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| Land Pride FM2572 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,040 lb for the standard unit with a duckfoot rotor; the brochure lists 1,040 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 261 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load. | Published mismatchBoth engine (38.7) and PTO (27.7) horsepower are below the published 42 hp minimum. | Published mismatchBoth engine (38.7) and PTO (29.9) horsepower are below the published 42 hp minimum. |
| Land Pride FM2584 · hammer rotor →Operating weight unconfirmed · Manual p39 specifies 1,236 lb for the standard unit with a duckfoot rotor; the brochure lists 1,168 lb without a rotor/inclusion basis. The separate hammer-rotor assembly is 301 lb. No complete hammer operating mass or shipping mass is established. Do not add the rotor to an already rotor-inclusive unit weight or substitute these references for the operating load. | Published mismatchBoth engine (38.7) and PTO (27.7) horsepower are below the published 49 hp minimum. | Published mismatchBoth engine (38.7) and PTO (29.9) horsepower are below the published 49 hp minimum. |
| Blue Diamond Heavy Duty 403740 →1763 lb · 1,763 lb (800 kg) in the Aug-2025 spec sheet (without PTO) and the Feb-2026 manual p49. Add the PTO shaft for the operating load. | Published mismatchBoth engine (38.7) and PTO (27.7) horsepower are below the published 75 hp minimum. | Published mismatchBoth engine (38.7) and PTO (29.9) horsepower are below the published 75 hp minimum. |
| Farmry HFS87 →1299 lb · 1,299 lb (589 kg) including PTO shaft on the product page and in the HFS manual Rev 1.6, printed p17. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. | Needs specification reviewAsk the manufacturer whether the horsepower range means engine or PTO power. |
| Farmer-Helper FH-EF95 →330 lb · 330 lb retained, the heavier of the product page (325 lb) and the FH-EF manual p13 (330 lb); crated 360 lb. Neither says whether the included PTO shaft is counted. | Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ. | Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ. |
| Farmer-Helper FH-EF105 →347 lb · 347 lb retained, the heavier of the product page (342 lb) and the FH-EF manual p13 (347 lb); crated 377 lb. Neither says whether the included PTO shaft is counted. | Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ. | Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ. |
| Farmer-Helper FH-EF125 →390 lb · 390 lb retained, the heavier of the product page (390 lb) and the FH-EF manual p13 (383 lb); crated 438 lb. Neither says whether the included PTO shaft is counted. | Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ. | Needs specification reviewConfirm the conflicting tractor specifications in your serial-specific manual; official source values differ. |
For a tractor with about 27–30 PTO hp, should I choose the 47-inch Y-blade LFP47 or the 60-inch hammer FH-EFGC155?
Read the guide →FIELD GUIDETake the complete setup, not just a horsepower number, to the manufacturer.
Read the guide →FOLLOW THE NUMBERS
Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.