Mahindra · COMPACT TRACTOR ATTACHMENTS

Mahindra 4540
Attachments that fit.

The 4540 4WD lists 31 PTO hp from a 41-hp engine, 1.0 hp above the 30-hp minimum that the 1640 Shuttle just misses. It also lists 3,527 lb of lift at 24 inches and a Category 1 and 2 hitch, so the larger flail mowers are inside its published ranges. The same 31 hp puts it over the 30-hp ceiling of small chippers.

31PTO hp41engine hp1 & 2hitch category3,527lb lift at 24 in.

By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test

Mahindra 4540 compact tractor — representative series photo
Manufacturer photo · Mahindra · representative series photo

PTO WOOD CHIPPERS FOR THE 4540

Chippers that fit the 4540.

11 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Woodland Mills WC68 PTO wood chipperPTO chipper

Woodland Mills

WC68

6″ max. chip diameter · 20–50 PTO hp

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,450checked November 7, 2026
Check current price at Woodland Mills
WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Farmry WCAP5 PTO wood chipperPTO chipper

Farmry

WCAP5

5″ max. chip diameter · 15–45 engine hp

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$1,698checked November 6, 2026
Check current price at Farmry
Farmry WCAP5 PRO PTO wood chipperPTO chipper

Farmry

WCAP5 PRO

5″ max. chip diameter · 15–45 PTO hp

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$1,899checked November 6, 2026
Check current price at Farmry
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$2,392checked November 7, 2026
Check current price at Farmer-Helper

5 more possible options in the full comparison table.

8 ruled out by published specs

FLAIL MOWERS FOR THE 4540

Flail mowers that fit the 4540.

19 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
WoodMaxx FM-78 · Y-blades flail mowerFlail mower

WoodMaxx

FM-78 · Y-blades

70″ cutting width, inches · 30–65 PTO hp · Y-blades only

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,900checked November 7, 2026
Check current price at WoodMaxx
TMG Industrial TFMS50 flail mowerFlail mower

TMG Industrial

TFMS50

49″ working cut, inches · 30–60 hp · basis unclear

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$2,799checked November 7, 2026
Check current price at TMG Industrial
TMG Industrial TMG-TFM60 flail mowerFlail mower

TMG Industrial

TMG-TFM60

60″ cutting width · 30–60 hp · basis unclear

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$2,299checked November 6, 2026
Check current price at TMG Industrial

13 more possible options in the full comparison table — see all.

4 ruled out by published specs
Scope of this guideU.S. 4WD · 8F/2R full constant mesh gear · dual clutch · open station ROPS. Each configuration below states the model and equipment covered by its sources.

Use the 31 PTO hp figure to open the 30-hp mower class and to rule out attachments capped at 30. Then confirm the hitch arrangement actually fitted, the PTO engagement on a plain “Live” PTO, and whether the brochure linked from Mahindra’s page still matches the tractor being sold.

  • Mahindra lists 41 engine hp and 31 PTO hp for the 4540 4WD in both the current table and the brochure the page links. The engine standard is not named.
  • 31 PTO hp clears FM-78, FM-78 Y and FM-78H’s 30-hp minimums by 1.0 hp. TFM60 and TFMS50 clear on either horsepower basis.
  • WC46 and TFG55’s 30-PTO-hp maximum is exceeded by 1.0 hp, and FM-54 Y’s 25-hp maximum by 6.0.
  • FM2560’s 33–80 band is cleared on engine power (41) but not PTO power (31); FM2572’s 42-hp minimum is missed on both.
  • 3,527 lb at 24 inches is about twice the 1600 Series’ 1,720 lb. The brochure lists the lift figure without a measurement point, so confirm it.
  • The PTO is listed only as “Live”, with no overrunning clutch or independent PTO clutch mentioned. The rear remote is optional on the 4540.

Choose the exact configuration.

U.S. 4WD · 8F/2R full constant mesh gear · dual clutch · open station ROPS

31 PTO hp

Mahindra 4540 4WD open-station ROPS gear tractor (8F/2R full constant mesh, dual clutch) in the current U.S. 4500 Series table and linked brochure. The 4540 2WD (sliding mesh, 4,191 lb) is a different configuration and is not covered.

Engine power
41 hp · 41 hp at 2,300 rpm labeled “(T4)” in the current 4500 Series specification table and the linked brochure. The rating standard is not named. This is not PTO power.
Rear hitch
Category 1 and 2 adjustable with telescopic stabilizers, position and draft control (Mahindra 4500 Series table and brochure)
Lift at 24 inches
3,527 lb · 3,527 lb at 24 inches aft in the current 4500 Series web table. The linked brochure lists 3,527 lb for 4WD models without naming the measurement point. No lift-point figure is published.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
8.7 gpm implement pump (open center, full-live with position and draft controls) in both sources; steering pump is listed separately in the brochure. Rear auxiliary remote: 1 optional (brochure). No usable outlet flow is published.
Pressure
No tractor relief pressure is published in the reviewed table or brochure. The brochure’s 2,350-psi figure is the 4550B backhoe’s relief valve setting, not a tractor rear-remote rating.
Find attachments for this tractor

Where the documents disagree.

Three-point lift measurement point

The current web table labels 3,527 lb as lift capacity at 24 inches aft. The linked 4500 brochure lists “Lift Capacity (lbs.)” of 3,525 (4540 2WD column) and 3,527 without stating the measurement location.

The web table’s located 24-inch label is used for 3,527 lb. Confirm the figure and measurement point in the operator manual for the actual serial.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Mahindra USA 4500 Series page: 4540 4WD / 4550 4WD specification tableSpecifications table: Engine, Drive Train, PTO, Hydraulics, Dimensions & Weight
  2. Mahindra USA 4500 Series brochure linked from the current series page (PDF modified November 2019): p4 specificationsp4 Specifications: engine hp, transmission, hydraulic system, 3-point linkage, PTO, operating weight
  3. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  4. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  5. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  6. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  7. Official U.S. TFMS50 page: operating specifications and price
  8. TMG TFMS50/60/72 manual, 2025-01-09, pp6, 10, 14–15, 19–20
  9. Official FM-62 page: exact hammer variant, price and equipment
  10. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  11. WoodMaxx manual index: Models 2025 to current
  12. Official FM-78 page: exact hammer variant, price and equipment
  13. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  14. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  15. Land Pride FM25 current North American family and model listing
  16. Official FM25 public catalog response — active models, gallery and linked documents
  17. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  18. Official FM25 brochure — printed p12 model table
  19. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  20. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.