acreage.EQUIPMENT
Compare0Find equipment

Massey Ferguson · COMPACT TRACTOR ATTACHMENTS

Massey Ferguson MF 2M.50
Attachments that fit.

The MF 2M.50 has a 48.8-hp, 2.43-L Iseki, 38.1 PTO hp (mechanical) or 36.2 (HST), a 3,086-lb lift at 24 inches and a Category I & II hitch. Both versions clear Woodland Mills WC88’s 35-PTO-hp minimum; the engine rating is 3.8 over Farmry WCAP5’s 45.

36.2–38.1PTO hp48.8engine hp1 & 2hitch category3,086lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Massey Ferguson MF 2M.50 hub: MF M-series cab tractor with rear snow blower (representative M Series photo; exact model not identified)
Manufacturer photo · Massey Ferguson · representative series photo

PTO WOOD CHIPPERS FOR THE MF 2M.50

Chippers that fit the MF 2M.50.

12 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full chipper guide
Woodland Mills WC88 PTO wood chipperPTO chipper

Woodland Mills

WC88

8″ maximum branch diameter, inches · 35–100+ PTO hp

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,995checked November 7, 2026
Check current price at Woodland Mills
Fit details
Woodland Mills WC68 PTO wood chipperPTO chipper

Woodland Mills

WC68

6″ max. chip diameter · 20–50 PTO hp

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,450checked November 7, 2026
Check current price at Woodland Mills
Fit details
WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Fit details
WoodMaxx MX-8800 PTO wood chipperPTO chipper

WoodMaxx

MX-8800

8″ maximum chip diameter, inches · 20 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$5,890checked November 7, 2026
Check current price at WoodMaxx
Fit details
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details
Farmry WCAP5 PRO PTO wood chipperPTO chipper

Farmry

WCAP5 PRO

5″ max. chip diameter · 15–45 PTO hp

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$1,899checked November 6, 2026
Check current price at Farmry
Fit details

6 more possible options in the full comparison table — see all.

7 ruled out by published specs

FLAIL MOWERS FOR THE MF 2M.50

Flail mowers that fit the MF 2M.50.

17 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

WoodMaxx FM-78 · Hammer blades flail mowerFlail mower

WoodMaxx

FM-78 · Hammer blades

70″ cutting width, inches · 30–65 PTO hp · Hammer blades only

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,900checked November 7, 2026
Check current price at WoodMaxx
Fit details
WoodMaxx FM-62 · Hammer blades flail mowerFlail mower

WoodMaxx

FM-62 · Hammer blades

55″ cutting width, inches · 24–45 PTO hp · Hammer blades only

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,630checked November 7, 2026
Check current price at WoodMaxx
Fit details
TMG Industrial TMG-TFM60 flail mowerFlail mower

TMG Industrial

TMG-TFM60

60″ cutting width · 30–60 hp · basis unclear

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$2,299checked November 6, 2026
Check current price at TMG Industrial
Fit details
Land Pride FM2572 shown as a representative FM25 series image; installed blade type is not visibleFlail mower

Land Pride

FM2572 · hammer rotor

72″ cutting width · 42–80 tractor hp · engine/PTO basis unspecified

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

Check seller priceAsk for a quote
Explore buying options at Land Pride
Fit details
Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details

11 more possible options in the full comparison table.

6 ruled out by published specs
Scope of this guideU.S. MF 2M.50 · 12x12 power shuttle · 4WD · ROPS · independent PTO / U.S. MF 2M.50 · 3-range Servo-HST · 4WD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Woodland Mills WC68 and WC88, WoodMaxx’s chippers and the 45-PTO-hp chippers fit. For mowing, WoodMaxx FM-62 and FM-78, FH-EFGC, TMG and Land Pride FM2560/FM2572 fit.

  • Spec sheet and page: 48.8 hp; 38.1 PTO hp (mechanical), 36.2 (HST); Category I & II.
  • Lift: 3,086 lb at 24 inches in the sheet (3,307 for the mechanical on the page).
  • Woodland Mills WC88 (35 PTO hp): inside by 3.1 / 1.2.
  • Farmry WCAP5 (to 45 engine hp): 3.8 over; Wallenstein BX72S (from 50): 1.2 short.
  • Farmry LFS (to 35): over.
  • 4,035 lb ROPS, 4,420 lb cab.

Choose the exact configuration.

U.S. MF 2M.50 · 12x12 power shuttle · 4WD · ROPS · independent PTO

38.1 PTO hp

Current U.S. Massey Ferguson MF 2M.50 from the November 2025 2M Series spec sheet and the current M Series page. Base weight 4,035 lb ROPS, 4,420 lb cab; minimum width about 70–71 in.

Engine power
48.8 hp · 48.8 hp rated engine power at 2,600 rpm in the November 2025 spec sheet and on the current M Series page; Massey Ferguson does not label it gross or net. It is not PTO power.
Rear hitch
Category I & II
Lift at 24 inches
3,086 lb · 3,086 lb 3-point lift capacity 24 in. behind the lift point in the spec sheet; 3,483 lb at the lift points.
Lift at link ends
3,483 lb
Hydraulics
See the spec sheet; not used in this screen.
Pressure
Not published in the reviewed spec sheet.
Find attachments for this tractor

U.S. MF 2M.50 · 3-range Servo-HST · 4WD · ROPS · independent PTO

36.2 PTO hp

Current U.S. Massey Ferguson MF 2M.50 from the November 2025 2M Series spec sheet and the current M Series page. Base weight 4,035 lb ROPS, 4,420 lb cab; minimum width about 70–71 in.

Engine power
48.8 hp · 48.8 hp rated engine power at 2,600 rpm in the November 2025 spec sheet and on the current M Series page; Massey Ferguson does not label it gross or net. It is not PTO power.
Rear hitch
Category I & II
Lift at 24 inches
3,086 lb · 3,086 lb 3-point lift capacity 24 in. behind the lift point in the spec sheet; 3,483 lb at the lift points.
Lift at link ends
3,483 lb
Hydraulics
See the spec sheet; not used in this screen.
Pressure
Not published in the reviewed spec sheet.
Find attachments for this tractor

Where the documents disagree.

Three-point lift at 24 inches (2M.50 mechanical)

The 2M Series spec sheet lists the 2M.50 mechanical at 3,086 lb and 2M.60 mechanical at 3,307 lb 24 in. behind the lift point; the current page lists 3,307 lb for both mechanical models and 3,086 lb for both HST models.

3,086 lb is used for the 2M.50 (both documents give it for HST). Every attachment on this site is far below either figure.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Massey Ferguson MF 2M Series spec sheet (PDF created November 3, 2025)p2 specifications: rated engine power @ 2,600 rpm, PTO power @ 540 rpm by transmission, transmission, 3-point hitch type, lift capacity at lift points and 24 in. behind lift point, minimum width, base weight
  2. Massey Ferguson MF M Series current U.S. pageModel comparison table: rated engine power (HP), PTO (HP) by transmission, rear lift capacity @24" behind (LBS), machine weight
  3. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  4. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  5. TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weight
  6. TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specifications
  7. Official U.S. WC88 page: price, capacity and drive system
  8. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  9. Official FM-62 page: exact hammer variant, price and equipment
  10. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  11. WoodMaxx manual index: Models 2025 to current
  12. Official FM-78 page: exact hammer variant, price and equipment
  13. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  14. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  15. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  16. Official FH-BX62S series page: self feed and current-manual link
  17. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  18. Product-linked older manual, Revision 1-3-2018, p38
  19. Betstco official manual index
  20. Land Pride FM25 current North American family and model listing
  21. Official FM25 public catalog response — active models, gallery and linked documents
  22. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  23. Official FM25 brochure — printed p12 model table

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

MF 2M.50 wood chippers: WC88 fits both transmissions

Woodland Mills rates WC88 from 35 PTO hp; the MF 2M.50 is rated 38.1 (mechanical) and 36.2 (HST). WC68, WoodMaxx’s chippers and the 45-PTO-hp chippers fit too. Its 48.8 engine hp is 3.8 over Farmry WCAP5’s 45 and 1.2 short of Wallenstein BX72S’s 50.

Read the guide →