acreage.EQUIPMENT
Compare0Find equipment

Massey Ferguson · COMPACT TRACTOR ATTACHMENTS

Massey Ferguson GC1725M
Attachments that fit.

This is the non-backhoe GC1725M from the retained North American GC1700 brochures, where it has 19.6 PTO hp. A current comparison index instead lists 18.5, while the linked current product is the separately named 1GC series. That unresolved revision boundary matters for a chipper requiring at least 19 PTO hp.

19.6PTO hp24.5engine hp1hitch category661lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test

Massey Ferguson GC1725M compact tractor — representative series photo
Manufacturer photo · Massey Ferguson · representative series photo

PTO WOOD CHIPPERS FOR THE GC1725M

Chippers that fit the GC1725M.

8 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details

2 more possible options in the full comparison table — see all.

11 ruled out by published specs

FLAIL MOWERS FOR THE GC1725M

Flail mowers that fit the GC1725M.

6 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details
17 ruled out by published specs
Scope of this guideGC1700 May 2023 U.S. brochure · 2-range HST · 4WD · fixed ROPS · non-backhoe. Each configuration below states the model and equipment covered by its sources.

Resolve 19.6 versus 18.5 before making a WM-8 power decision; neither figure rounds up to 20.

  • WM-8H and WM-8M start at 19 PTO hp, so the two published tractor values produce different minimum-power results.
  • The brochure still gives 661 lb at 24 inches, the same as GC1723E. A higher power label does not establish a larger permissible rear load.
  • The M profile excludes the MB backhoe package and all 1GC successors.

Choose the exact configuration.

GC1700 May 2023 U.S. brochure · 2-range HST · 4WD · fixed ROPS · non-backhoe

19.6 PTO hp

North American GC1725M, exact non-backhoe column of the May 2023 GC1700 brochure, corroborated where possible by the 2019 U.S. brochure: two-range HST, 4WD and fixed ROPS. This is a brochure-generation profile, not a serial-range certification. Excludes the EB/MB backhoe packages, current 1GC successors, earlier GC1705/GC1715 families and Australian-market configurations.

Engine power
24.5 hp · 2019 U.S. GC1700 brochure explicitly labels gross engine horsepower; May 2023 brochure calls the same HP figure rated engine power. No SAE/ISO test standard was established. Printed HP is retained without converting the accompanying kW label.
Rear hitch
Category I
Lift at 24 inches
661 lb · 24 inches behind pivot pins; separate from 1,191 lb at the pivot pins
Lift at link ends
1,191 lb
Hydraulics
2019 and May 2023 GC1700 brochures: 6.8 gpm hydraulic flow without circuit split. Current U.S. index: 6.9 gpm under an implement-flow heading. Generation applicability, steering allocation and usable rear flow remain unverified.
Pressure
Unverified in the reviewed U.S. manufacturer sources.
Find attachments for this tractor

Where the documents disagree.

PTO horsepower

2019 and May 2023 GC1700 brochures: 19.6 PTO hp. Current U.S. comparison-index GC1725M row: 18.5 PTO hp.

Keep 19.6 only within the selected GC1700 brochure-generation scope and preserve 18.5 as unresolved alternate evidence. WM-8 minimum screening remains conditional until the actual serial/revision is established.

Hydraulic flow

Both GC1700 brochures list 6.8 gpm without a circuit split; current comparison index says 6.9 gpm under implement flow.

Retain both labels and numbers without declaring either to be verified rear-coupler delivery. No total/implement/steering numeric split is normalized.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Massey Ferguson GC1700 U.S. brochure, May 2023 — printed/PDF p 10
  2. Massey Ferguson GC1700E/M U.S. brochure, 2019 — printed/PDF p 6
  3. Massey Ferguson current U.S. subcompact comparison index — retained GC1723E / GC1725M rows
  4. Massey Ferguson current U.S. 1GC page — generation boundary only
  5. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  6. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  7. Official WM-8H product page: power, feed, hitch and price
  8. WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantities
  9. WoodMaxx current manual index
  10. Official WM-8M page: configuration, 775 lb hitch weight and price
  11. WM-8M manual linked by current WoodMaxx manual index
  12. WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
  13. Official MX-8800 page: power/capacity claims, feed, hitch and current sale price
  14. MX-8800 manual Rev D, September 18, 2026: specifications and setup

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

PTO wood chippers for the Massey Ferguson GC1725M

A GC1725M chipper search turns on a source boundary: the GC1700 brochures give 19.6 PTO hp, but the current U.S. comparison index says 18.5. Those values fall on opposite sides of the WM-8 minimum of 19. Even if the higher brochure figure applies, the tractor’s 661 lb hitch reference at 24 inches remains unchanged.

Read the guide →