acreage.EQUIPMENT
Compare0Find equipment

New Holland · COMPACT TRACTOR ATTACHMENTS

New Holland WORKMASTER 25S
Attachments that fit.

This guide covers the open-air, two-range HST WORKMASTER 25S. Its 24.7 gross engine hp and 17.2 PTO hp are separate figures: the PTO output is below the 19- and 20-hp minimums on several larger chippers and mowers. A roughly 47-inch rear width and 728 lb lift at 24 inches make the smaller choices worth examining closely.

17.2PTO hp24.7engine hp1hitch category728lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test

New Holland WORKMASTER 25S compact tractor
Manufacturer photo · New Holland

PTO WOOD CHIPPERS FOR THE WORKMASTER 25S

Chippers that fit the WORKMASTER 25S.

7 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
Wallenstein BX36S PTO wood chipperPTO chipper

Wallenstein

BX36S

3.5″ max. chip diameter · 12–30 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details

1 more possible option in the full comparison table — see all.

12 ruled out by published specs

FLAIL MOWERS FOR THE WORKMASTER 25S

Flail mowers that fit the WORKMASTER 25S.

6 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details
17 ruled out by published specs
Scope of this guide2-range HST · 4WD · open-air ROPS · U.S. sources; manual PIN LSM0W25STP0021943+. Each configuration below states the model and equipment covered by its sources.

Choose the exact rotor or feed system, then check its complete load and placement on the 25S.

  • FM-54 Y has a 47-inch cut, close to the documented rear width; the model name does not mean a 54-inch cut.
  • WC46 clears its 15-PTO-hp minimum, but 17.2 is below the maker’s over-20 threshold for full 4-inch logs at full feed speed.
  • The optional rear-remote kit is restricted on backhoe-capable tractors. Fixed flails and a chipper’s self-contained feed avoid that particular circuit requirement.

Choose the exact configuration.

2-range HST · 4WD · open-air ROPS · U.S. sources; manual PIN LSM0W25STP0021943+

17.2 PTO hp

U.S. WORKMASTER 25S, two-range HST, 4WD and open-air ROPS, using the current-linked April 2025 brochure and December 2023 operator manual 92157405 for PIN LSM0W25STP0021943 and after. The actual tractor PIN and equipment must be checked. Excludes the larger WORKMASTER 25, Boomer 25, cab-package mass and unverified backhoe/loader combinations.

Engine power
24.7 hp · Gross engine horsepower at 3,000 rpm in the April 2025 U.S./Canada brochure. The separate 17.2 PTO hp is also confirmed as observed HST output by manual 92157405.
Rear hitch
Category I
Lift at 24 inches
728 lb · 728 lb at 24 inches behind ball ends, separate from 992 lb at the ends; April 2025 brochure p 26 and December 2023 manual p 9-6 agree.
Lift at link ends
992 lb
Hydraulics
Brochure: 4.6 gpm implement, 2.1 gpm steering and 6.7 gpm total. Manual p 9-6 instead labels 6.6 gpm as hydraulic-lift pump capacity. These circuit labels are not reconciled; actual rear-outlet delivery is unknown.
Pressure
Manual p 9-6 hydraulic-lift system relief setting: 1,885–1,958 psi. This is not a measured rear-coupler pressure or the separate HST relief setting.
Find attachments for this tractor

Where the documents disagree.

Hydraulic flow

Brochure p 26 separates 4.6 gpm implement, 2.1 steering and 6.7 total. Manual p 9-6 labels 6.6 gpm as hydraulic-lift pump capacity while separately giving 2.1 steering.

Retain the brochure split and manual wording; do not assign 6.6 or 6.7 to rear implement delivery. Verify the actual circuit and kit.

Engine table applicability

Manual p 9-4 has a Boomer 25 Compact table heading and lists 1,115 cc, while brochure p 26 gives 1.26 L for WORKMASTER 25S. Both give 24.7 gross hp at 3,000 rpm.

Use the independently corroborated power rating. Leave engine displacement and exact engine-table applicability unresolved; do not import Boomer specifications.

Tractor mass

Brochure p 26 gives 1,444 lb ROPS weight with inclusions unstated. Manual p 9-8 gives 2,590 lb with fluids and no operator without a clear attachment package.

These are not a verified common configuration. Do not calculate remaining gross-mass allowance from either figure; obtain actual equipped axle weights and the applicable limits.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. New Holland U.S./Canada compact brochure NH45145459, April 2025 — p 26 specifications; p 28 publication scope
  2. WORKMASTER 25S operator manual 92157405, December 2023 — PIN LSM0W25STP0021943 and after; pp 3-34, 6-6, 6-17, 9-4, 9-6 and 9-8
  3. Current New Holland U.S. WORKMASTER 25S page — HST, 24.7 gross hp and 17.2 PTO hp
  4. Farmry official product specifications
  5. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  6. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  7. Farmry official product specifications
  8. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  9. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  10. Official WM-8H product page: power, feed, hitch and price
  11. WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantities
  12. WoodMaxx current manual index
  13. Official FM-54 page: Y option, displayed price, shaft and weight
  14. FM-54 manual for 2025-and-newer models, p40 specifications
  15. Official fixed FM-62 page: exact black/Y option, USD price, blade guidance and conflicts
  16. Current FM-62/62H and FM-78/78H manual: printed pp31,40,45 / PDF pp32,41,46
  17. Wallenstein official U.S. BX36S page — explicit engine band, capacity, RPM label, reference weight and accessories
  18. Wallenstein BX36S support — currently linked operator, setup and shaft documents
  19. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40
  20. PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
  21. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  22. Wallenstein official U.S. BX52S page — explicit engine band, capacity, RPM label, reference weight and accessories
  23. Wallenstein BX52S support — currently linked operator, setup and shaft documents
  24. Official Betstco FH-EF95 product page — PTO hp range, gearbox, widths, weights, blades and price
  25. Farmer-Helper FH-EF Series Manual (June 2025), p13 Machine Specs
  26. Official Betstco FH-EF standard-duty series page
  27. Official Betstco FH-EF105 product page — PTO hp range, gearbox, widths, weights, blades and price

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

Flail mowers for the New Holland WORKMASTER 25S

The 25S combines 17.2 PTO hp with a rear width near 47 inches. That makes a 47-inch FM-54 Y a close width match on paper, while a wider LFS53 changes both the deck position and the load. The 25S falls below the 55-inch FM-62 Y’s 20-PTO-hp minimum.

Read the guide →FIELD GUIDE

Wood chippers for the New Holland WORKMASTER 25S

At 17.2 PTO hp, the 25S can clear a 15-PTO-hp chipper minimum while remaining below a 19-PTO-hp minimum. Its separate 24.7 gross engine hp also falls inside two Wallenstein engine-based bands. That opens different feed and storage choices without establishing maximum-diameter performance or an approved rear load.

Read the guide →