New Holland · COMPACT TRACTOR ATTACHMENTS
The 12×12 gear WORKMASTER 35 has 29.7 PTO hp in the current-linked brochure and 27.4 observed PTO hp in the linked operator manual. This guide keeps both visible. Its width also needs confirmation: 66.5 inches in the brochure differs from the manual’s 54-inch industrial-tire entry.
By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test
PTO WOOD CHIPPERS FOR THE WORKMASTER 35
13 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
PTO chipperWoodland Mills
4″ max. chip diameter · 15–30 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperWoodland Mills
6″ max. chip diameter · 20–50 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperWoodMaxx
9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWallenstein
5″ max. chip diameter · 30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperFarmry
5″ max. chip diameter · 15–45 engine hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
7 more possible options in the full comparison table — see all.
FLAIL MOWERS FOR THE WORKMASTER 35
16 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
Flail mowerWoodMaxx
55″ cutting width, inches · 20–45 PTO hp · Y-blades only
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
Flail mowerWoodMaxx
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerFarmry
87″ cutting width · 30–85 HP (basis not stated) · official page and manual
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmer-Helper
37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Flail mowerFarmer-Helper
41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Flail mowerFarmer-Helper
48″ cutting width, inches · 20–45 PTO hp on the product page; manual lists the 20-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
10 more possible options in the full comparison table — see all.
12×12 synchronized shuttle · 4WD · ROPS · brochure 29.7 PTO hp; manual observed 27.4
U.S. T4B WORKMASTER 35 with 12×12 synchronized shuttle, 4WD and folding ROPS, as presented in current-linked brochure NH45145459 (April 2025). Manual 92157413 (November 2023) specifies WORKMASTER 35 PIN LSM0W35RTP0014395 and after and carries conflicting observed PTO and dimension figures. Resolve applicability for the actual PIN. Excludes HST, Boomer 35, WORKMASTER 35C and earlier differently rated models.
April 2025 brochure p 26: mechanical 29.7 PTO hp and HST 28.0. November 2023 manual p 9-5: observed mechanical 27.4 hp and HST 25.7, with rear 540 rpm at 2,509 engine rpm.
Retain 29.7 as the sourced brochure figure, flag mandatory review, show 27.4 as the manual alternative, and require a PIN-specific explanation. Do not infer model-year cutoffs or average the figures.
Brochure p 26 gives width 66.5 inches and wheelbase 67.5 inches. Manual p 9-8 gives maximum rear-tire width 54 inches for its dished-in industrial-tire setup and wheelbase 69 inches.
Treat the dimensions as unresolved source/configuration differences. Measure the actual tractor; width calculations are conditional examples rather than coverage claims.
Brochure mechanical steering flow is 4.2 gpm; the manual steering table continues onto p 9-5 with 4.8 gpm. The manual hydraulic-lift pump-capacity row prints 31.2 L / 8.2 US gal without a time unit.
Preserve source units and circuit labels. Use brochure 8.2 gpm implement as a published rating, not measured rear delivery, and do not construct a new total from conflicting entries.
FOLLOW THE NUMBERS
Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB
The gear WORKMASTER 35 has two unresolved source questions that matter together: 29.7 versus 27.4 PTO hp, and 66.5 versus 54 inches of width. A 55-inch FM-62 remains inside its power band under either rating, but whether it reaches beyond the tires changes with the actual tractor width. A 70-inch FM-78 still starts above both PTO figures.
Read the guide →FIELD GUIDEThe WORKMASTER 35’s unresolved 29.7 brochure versus 27.4 observed manual PTO rating changes the numerical distance from a chipper limit, even when the initial result stays the same. Both figures fit WC46’s 15–30 band and clear WC68’s 20 minimum. They do not establish full 6-inch performance or justify choosing a larger machine solely for its advertised opening.
Read the guide →