acreage.EQUIPMENT
Compare0Find equipment

New Holland · COMPACT TRACTOR ATTACHMENTS

New Holland WORKMASTER 40
Attachments that fit.

New Holland’s brochure and specification workbook list the WORKMASTER 40 at 34.0 PTO hp (gear) and 32.0 (HST). Its November 2023 operator manual lists 30.8 and 29.0 observed PTO hp. The 3-hp gap decides three attachments: Land Pride FM2560’s 33-hp minimum, Woodland Mills WC46’s 30-hp ceiling and WoodMaxx FM-78’s 30-hp minimum.

32–34PTO hp40engine hp1hitch category1,433lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

New Holland WORKMASTER 40 compact tractor — representative series photo
Manufacturer photo · New Holland · representative series photo

PTO WOOD CHIPPERS FOR THE WORKMASTER 40

Chippers that fit the WORKMASTER 40.

11 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full chipper guide
Woodland Mills WC68 PTO wood chipperPTO chipper

Woodland Mills

WC68

6″ max. chip diameter · 20–50 PTO hp

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$3,450checked November 7, 2026
Check current price at Woodland Mills
Fit details
WoodMaxx WM-8H PTO wood chipperPTO chipper

WoodMaxx

WM-8H

8″ max. chip diameter · 19 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$4,095checked November 7, 2026
Check current price at WoodMaxx
Fit details
WoodMaxx WM-8M PTO wood chipperPTO chipper

WoodMaxx

WM-8M

8″ max. chip diameter · 19 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Resolve the conflicting published specifications for the exact model revision.

$3,690checked November 7, 2026
Check current price at WoodMaxx
Fit details
Farmry WCAP5 PTO wood chipperPTO chipper

Farmry

WCAP5

5″ max. chip diameter · 15–45 engine hp

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,698checked November 6, 2026
Check current price at Farmry
Fit details
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
Wallenstein BX52RI PTO wood chipperPTO chipper

Wallenstein

BX52RI

5″ max. chip diameter · 30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details

5 more possible options in the full comparison table — see all.

8 ruled out by published specs

FLAIL MOWERS FOR THE WORKMASTER 40

Flail mowers that fit the WORKMASTER 40.

19 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry LFS61 flail mowerFlail mower

Farmry

LFS61

61″ cutting width · 15–35 hp · basis unclear

Gear: Possible — confirm detailsHST: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$1,899checked November 6, 2026
Check current price at Farmry
Fit details
Farmry LFP47 flail mowerFlail mower

Farmry

LFP47

47.2″ cutting width, inches · 25–45 hp · basis unclear

Gear: Possible — confirm detailsHST: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$2,199checked November 7, 2026
Check current price at Farmry
Fit details

13 more possible options in the full comparison table — see all.

4 ruled out by published specs
Scope of this guideU.S. WORKMASTER 40 · 12x12 synchro gear · 4WD · ROPS · independent PTO / U.S. WORKMASTER 40 · 3-range hydrostatic · 4WD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Ask the dealer which PTO figure applies to the tractor’s PIN before choosing an attachment rated near 30 or 33 hp. Engine-rated attachments use 40 gross hp.

  • Brochure and workbook: 40 gross hp; 34.0 (gear) or 32.0 (HST) PTO hp. Manual: 30.8 and 29.0 observed at 2,509 engine rpm.
  • Land Pride FM2560 (33 hp, basis unspecified): gear +1.0 on the brochure, −2.2 on the manual; HST short on both PTO figures; +7 on engine power.
  • Woodland Mills WC46 / TFG55 (to 30 PTO hp): the HST is inside by 1.0 only on the manual’s 29.0.
  • WoodMaxx FM-78 (30 PTO hp minimum): the HST is 1.0 short only on the manual’s 29.0.
  • Woodland Mills WC88 (35) is out on every figure; Farmry WCAP5 (to 45 engine hp) is inside.
  • Lift is 1,433 lb at 24 inches and 1,808 lb at the ball ends; Category I; manual relief 2,418 psi.

Choose the exact configuration.

U.S. WORKMASTER 40 · 12x12 synchro gear · 4WD · ROPS · independent PTO

34 PTO hp

Current U.S. New Holland WORKMASTER 40 with the 12x12 synchro gear, ROPS, from the specification workbook, March 2025 brochure and current page. Weight 3,067 lb. No model-year or serial cutoff is established.

Engine power
40 hp · 40 gross hp at 2,600 rpm in the specification workbook, brochure and current page; the SAE standard is not named. This is not PTO power.
Rear hitch
Category I
Lift at 24 inches
1,433 lb · 1,433 lb 24 inches behind and 1,808 lb at the ball ends in the specification workbook and the brochure’s WORKMASTER table (PDF p26). The Boomer 40, on the same engine and PTO figures, lists 1,345 lb at 24 inches.
Lift at link ends
1,808 lb
Hydraulics
8.2 gpm implement flow; 12.4 gpm (gear) or 13.5 gpm (HST) total with steering. One or two remote valves optional. Rear-remote outlet flow is not published.
Pressure
2,418 psi (16,671 kPa) hydraulic lift system relief in the operator manual (p 9-5).
Find attachments for this tractor

U.S. WORKMASTER 40 · 3-range hydrostatic · 4WD · ROPS · independent PTO

32 PTO hp

Current U.S. New Holland WORKMASTER 40 with the 3-range hydrostatic, ROPS, from the specification workbook, March 2025 brochure and current page. Weight 3,067 lb. No model-year or serial cutoff is established.

Engine power
40 hp · 40 gross hp at 2,600 rpm in the specification workbook, brochure and current page; the SAE standard is not named. This is not PTO power.
Rear hitch
Category I
Lift at 24 inches
1,433 lb · 1,433 lb 24 inches behind and 1,808 lb at the ball ends in the specification workbook and the brochure’s WORKMASTER table (PDF p26). The Boomer 40, on the same engine and PTO figures, lists 1,345 lb at 24 inches.
Lift at link ends
1,808 lb
Hydraulics
8.2 gpm implement flow; 12.4 gpm (gear) or 13.5 gpm (HST) total with steering. One or two remote valves optional. Rear-remote outlet flow is not published.
Pressure
2,418 psi (16,671 kPa) hydraulic lift system relief in the operator manual (p 9-5).
Find attachments for this tractor

Where the documents disagree.

PTO horsepower

The specification workbook and March 2025 brochure list the gear WORKMASTER 40 at 34.0 PTO hp. The November 2023 operator manual (p 9-5) lists 30.8 hp observed PTO horsepower, with rear 540 rpm at 2,509 engine rpm.

The brochure’s 34.0 is used, as on the site’s WORKMASTER 35 profile, and the manual’s 30.8 is shown beside it. Ask New Holland which figure applies to the PIN on offer.

PTO horsepower

The specification workbook and March 2025 brochure list the HST WORKMASTER 40 at 32.0 PTO hp. The November 2023 operator manual (p 9-5) lists 29.0 hp observed PTO horsepower, with rear 540 rpm at 2,509 engine rpm.

The brochure’s 32.0 is used, as on the site’s WORKMASTER 35 profile, and the manual’s 29.0 is shown beside it. Ask New Holland which figure applies to the PIN on offer.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. New Holland WORKMASTER 25/35/40 specification workbook (series-page download)Gross horsepower, PTO horsepower gear/HST, flows, lift at ball ends and 24 in., 3-point category, width, weight (WORKMASTER 40 column)
  2. WORKMASTER 35/40 operator manual 92157413, November 2023 — WORKMASTER 40 PIN LSM0W40RCP0014022 and after; pp 9-3 to 9-5 specificationsp 9-3: engine gross 29.8 kW (40.0 hp); p 9-5: rear PTO 540 at 2,509 engine rpm, PTO horsepower observed 30.8 hp mechanical / 29.0 hp HST; hydraulic lift system relief 2,418 psi
  3. New Holland WORKMASTER and Boomer compact tractor brochure (PDF created March 25, 2025)PDF p3 model table (gross hp, PTO hp gear/HST, lift); PDF p15 Boomer text (Category I three-point hitch); PDF p27 Boomer Series specifications (PTO hp, lift at ball ends and 24 in., category, width, weight)
  4. New Holland WORKMASTER 40 current U.S. pageAvailable Models and Technical Specifications (gross horsepower, engine)
  5. Farmry official product specifications
  6. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  7. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  8. Farmry official product specifications
  9. Farmry WCAP5 operator manual, Rev 1.5 — Printed pp19–20 specifications; pp30–34 driveline checks
  10. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  11. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  12. Woodland Mills TFG55 PTO official U.S. product page
  13. Woodland Mills TFG55 PTO operator manual, Rev B, 15-Oct-2024 — Printed p9 weight/minimum HP; p11 hitch paragraph; p13 included parts
  14. Official U.S. WC88 page: price, capacity and drive system
  15. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  16. Official FM-62 page: exact hammer variant, price and equipment
  17. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  18. WoodMaxx manual index: Models 2025 to current
  19. Official FM-78 page: exact hammer variant, price and equipment
  20. Land Pride FM25 current North American family and model listing
  21. Official FM25 public catalog response — active models, gallery and linked documents
  22. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  23. Official FM25 brochure — printed p12 model table
  24. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  25. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

WORKMASTER 40 wood chippers: the manual’s 29 hp changes WC46

Woodland Mills rates WC46 and TFG55 to 30 PTO hp, and the New Holland WORKMASTER 40 is over on its brochure ratings, 34.0 gear and 32.0 HST. On the operator manual’s 29.0 the HST tractor is inside. WC88’s 35 is out of reach either way.

Read the guide →FIELD GUIDE

WORKMASTER 40 flail mowers: FM-78 hinges on the HST rating

WoodMaxx rates its FM-78 family from 30 PTO hp, and the New Holland WORKMASTER 40 clears that on every figure except the HST operator manual’s 29.0. FM-62, Farmer-Helper, Farmry LFS and LFP47, TMG and Land Pride FM2560 fit.

Read the guide →