acreage.EQUIPMENT
Compare0Find equipment

New Holland · COMPACT TRACTOR ATTACHMENTS

New Holland WORKMASTER 40C
Attachments that fit.

The New Holland WORKMASTER 40C is a 40-hp compact tractor with 35.9 PTO hp in gear or 34.8 in HST, a Category 1 hitch and 1,596 lb of lift at 24 inches. The two ratings sit either side of 35 PTO hp.

34.8–35.9PTO hp40engine hp1hitch category1,596lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 13, 2026 · Specification research, not a field test

New Holland WORKMASTER 40C with front loader lifting mulch (New Holland identifies the tractor as a WORKMASTER 40C)
Manufacturer photo · New Holland

PTO WOOD CHIPPERS FOR THE WORKMASTER 40C

Chippers that fit the WORKMASTER 40C.

12 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.

Full chipper guide
WoodMaxx WM-8H PTO wood chipperPTO chipper

WoodMaxx

WM-8H

8″ max. chip diameter · 19 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$4,095checked November 7, 2026
Check current price at WoodMaxx
Fit details
WoodMaxx MX-8800 PTO wood chipperPTO chipper

WoodMaxx

MX-8800

8″ maximum chip diameter, inches · 20 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$5,890checked November 7, 2026
Check current price at WoodMaxx
Fit details
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details

6 more possible options in the full comparison table — see all.

7 ruled out by published specs

FLAIL MOWERS FOR THE WORKMASTER 40C

Flail mowers that fit the WORKMASTER 40C.

19 of 23 flail mowers we track pass the published power, hitch and speed screen on at least one configuration. Each still has a detail to confirm with the seller.

Full flail mower guide
Farmry LFP47 flail mowerFlail mower

Farmry

LFP47

47.2″ cutting width, inches · 25–45 hp · basis unclear

Gear: Possible — confirm detailsHST: Possible — confirm details

Ask the manufacturer whether the horsepower range means engine or PTO power.

$2,199checked November 7, 2026
Check current price at Farmry
Fit details

13 more possible options in the full comparison table — see all.

4 ruled out by published specs
Scope of this guideU.S. WORKMASTER 40C · 12x12 gear with synchronized shuttle · ROPS · PTO with overrunning clutch / U.S. WORKMASTER 40C · 3-range hydrostatic, two-pedal · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Gear clears Woodland Mills WC88’s 35-PTO-hp minimum and is over Farmry LFS’s 35 on both figures; HST is 0.2 short of WC88 and inside LFS on PTO. WoodMaxx’s chippers and flails, WC68 and the Farmer-Helper mowers fit either.

  • February 2026 brochure: 40 gross hp; 35.9 PTO hp gear, 34.8 HST.
  • Woodland Mills WC88 (35 PTO hp minimum): gear 0.9 over; HST 0.2 short.
  • Farmry LFS45 / 53 / 61 (15–35 hp, basis unspecified): gear over on both; HST inside on PTO, 5 over on engine.
  • Woodland Mills WC46 / TFG55 (to 30 PTO hp): over.
  • WoodMaxx FM-78 (30–65 PTO hp): inside on both.
  • Lift: 1,596 lb at 24 inches.

Choose the exact configuration.

U.S. WORKMASTER 40C · 12x12 gear with synchronized shuttle · ROPS · PTO with overrunning clutch

35.9 PTO hp

Current U.S. New Holland WORKMASTER 40C with the 12x12 gear transmission, ROPS, from the February 2026 WORKMASTER 35C & 40C brochure and the current page. Weight without loader 3,073 lb.

Engine power
40 hp · 40 gross hp (29.2 kW) at 2,600 rpm, turbocharged, in the February 2026 brochure and on the current page; the SAE standard is not named. This is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
1,596 lb · 1,596 lb (724 kg) 24 inches behind the ball ends and 2,067 lb (940 kg) at the ball ends in the February 2026 brochure (p13), for both models and transmissions.
Lift at link ends
2,067 lb
Hydraulics
8.4 gpm implement flow, 4.9 gpm steering, 13.3 gpm total in the brochure; one, two or three rear remotes. Rear-remote outlet flow is not published.
Pressure
Not published in the reviewed brochure or page.
Find attachments for this tractor

U.S. WORKMASTER 40C · 3-range hydrostatic, two-pedal · ROPS · independent PTO

34.8 PTO hp

Current U.S. New Holland WORKMASTER 40C with the hydrostatic transmission, ROPS, from the February 2026 WORKMASTER 35C & 40C brochure and the current page. Weight without loader 3,073 lb.

Engine power
40 hp · 40 gross hp (29.2 kW) at 2,600 rpm, turbocharged, in the February 2026 brochure and on the current page; the SAE standard is not named. This is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
1,596 lb · 1,596 lb (724 kg) 24 inches behind the ball ends and 2,067 lb (940 kg) at the ball ends in the February 2026 brochure (p13), for both models and transmissions.
Lift at link ends
2,067 lb
Hydraulics
8.4 gpm implement flow, 4.9 gpm steering, 13.3 gpm total in the brochure; one, two or three rear remotes. Rear-remote outlet flow is not published.
Pressure
Not published in the reviewed brochure or page.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 13, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. New Holland WORKMASTER 35C & 40C Compact Series brochure (PDF created February 26, 2026), linked from the current U.S. pagep13 Specifications: gross engine hp; PTO hp gear / HST; 3-Point Hitch Category 1; lift at ball ends and 24 in. behind ball ends; rear PTO type; hydraulic flow; width and weight. p2 overview table
  2. New Holland WORKMASTER 40C current U.S. pageQuick specs: engine horsepower and transmission choices; brochure link
  3. Farmry official product specifications
  4. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  5. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  6. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  7. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  8. Official U.S. WC88 page: price, capacity and drive system
  9. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  10. Official WM-8H product page: power, feed, hitch and price
  11. WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantities
  12. WoodMaxx current manual index
  13. Official FM-62 page: exact hammer variant, price and equipment
  14. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  15. Official FM-78 page: exact hammer variant, price and equipment
  16. Official MX-8800 page: power/capacity claims, feed, hitch and current sale price
  17. MX-8800 manual Rev D, September 18, 2026: specifications and setup
  18. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  19. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  20. Official EFGC series: fixed models and separate hydraulic-offset kits
  21. Official Betstco manual index
  22. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  23. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

WORKMASTER 40C wood chippers: WC88 on gear only

Woodland Mills WC88 needs 35 PTO hp, and the New Holland WORKMASTER 40C clears it in gear at 35.9 but is 0.2 short in HST at 34.8. WoodMaxx’s chippers, WC68, Farmry WCAP5 and Wallenstein BX52S fit either version.

Read the guide →FIELD GUIDE

WORKMASTER 40C flail mowers: gear is over Farmry LFS

Farmry rates its LFS flail mowers at 15–35 hp without saying engine or PTO, and the gear WORKMASTER 40C is over that on both its 35.9 PTO and 40 engine hp. The HST 40C’s 34.8 PTO hp is inside, so LFS stays for it pending Farmry’s answer.

Read the guide →