acreage.EQUIPMENT
Compare0Find equipment

TYM 3015 · PTO WOOD CHIPPERS

TYM 3015 wood chippers: exactly on three limits

WoodMaxx MX-9900 and Farmer-Helper FH-BX62S start at 25 PTO hp and Wallenstein BX36S stops at 30 engine hp, and the TYM 3015 is rated exactly 25 and 30. It is inside all three with no margin, and nearly every other chipper here fits.

See the best matchesAll 3015 attachments

By Acreage Equipment · Reviewed November 14, 2026 · Specification research, not a field test

PUT THIS GUIDE TO WORK

See published mismatches and the checks still needed.

TYM 3015 hub: TYM studio photo of a series tractor with front loader from the 3015 brochure cover (representative; the same image appears on sibling models’ brochures)
Manufacturer photo · TYM · representative series photo
PTO wood chippers at work

BEST MATCHES FOR THE 3015

Chippers to shortlist.

14 of 19 pto wood chippers we track pass the published power, hitch and speed screen on at least one configuration. “Specs line up” cards come first.

WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Fit details
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details
Wallenstein BX36S PTO wood chipperPTO chipper

Wallenstein

BX36S

3.5″ max. chip diameter · 12–30 engine hp · official U.S. page

Gear: Possible — confirm detailsHST: Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details

8 more possible options in the full comparison table.

5 ruled out by published specs

THE DECISION IN NUMBERS

Chipper screens at 25 PTO hp, 30 engine hp, Category I

Tractor reference: TYM 3015R synchromesh and 3015H HST (one PTO figure for both), ROPS; Category I; 2,425 lb at 24 in.

Scroll the table sideways on smaller screens.

ChipperPublished requirementOn 25 PTO / 30 engine hpResult
WoodMaxx MX-990025 PTO hp minimumExactly at the minimumFits
Farmer-Helper FH-BX62S25–45 PTO hpExactly at the minimumFits
Wallenstein BX36STo 30 engine hpExactly at the maximumFits
WoodMaxx WM-8H / WM-8M / MX-880019–20 PTO hp minimum5 to 6 overFits
Woodland Mills WC46 / TFG55 / WC68To 30 / 50 PTO hpInsideFits
Farmry WCAP5 / Pro; Farmer-Helper FH-BX42; Wallenstein BX52S15 or 22 to 45–55 hpInsideFits
Wallenstein BX52RI30–55 engine hp (page); hydraulic feed; 5-in.BX52RI inside the page’s 30, under the manual’s 40Ask Wallenstein: page vs manual floor; hydraulic remote or power pack
Woodland Mills WC88; Wallenstein BX72S35 PTO / 50 engine hp minimumShortExcluded
Sources for this decision table (26)

MX-9900 or FH-BX62S

WoodMaxx MX-9900 (9-inch, hydrostatic feed) and Farmer-Helper FH-BX62S (6-inch) both start at 25 PTO hp, the 3015’s rating. Both are inside with no margin and far from their full-capacity statements. The comparison below sets them side by side.

Zero margin

A published minimum is the power the maker says the chipper needs to work as rated. At exactly 25 PTO hp the 3015 has nothing to spare for MX-9900 or FH-BX62S, and at exactly 30 engine hp nothing above BX36S’s ceiling; confirm the rating for the tractor on offer before relying on any of the three.

Lift

TYM lists 2,425 lb 24 inches behind the lift point, high for the power class; weight is unlikely to limit any chipper here. Add the shaft and front ballast as the tractor manual directs.

Wallenstein hydraulic-feed BXR chippers

Wallenstein’s current pages rate the 5-inch BX52RI (30–55 engine hp, Category I). Two hydraulic rollers pull material in at a set rate, and P3 PULSE reverses them when the rotor slows; they need 3–6 gpm from a rear remote or Wallenstein’s PTO-driven power pack. The TYM 3015’s 30 engine hp is inside the BX52RI page’s 30–55 but under the 40 that the manual’s table gives for the BX52R, so ask Wallenstein which floor applies to the serial on offer. Its published lift at 24 inches, 2,425 lb, carries the 845-lb BX52RI with 1,580 lb to spare. Wallenstein lists no price; ask a dealer.

THE SCREEN, WITH ITS LIMITS VISIBLE

Compare each configuration.

No pairing below is manufacturer-confirmed. “Preliminary” still requires implement limits, load center, ballast, hitch geometry and shaft checks.

Initial specification screen only. Scroll the table on small screens. Read the product page for every remaining check.

AttachmentU.S. 3015R · 12F/12R synchromesh · 4WD · ROPS · independent PTO25 PTO hpU.S. 3015H · 3-range HST · 4WD · ROPS · independent PTO25 PTO hp
Farmry WCAP5 →412 lb · Net weight WITH PTO shaft, manual Rev1.5 p20Preliminary spec matchConfirm implement weight limits, center of gravity, front ballast and stability in your tractor manual.Preliminary spec matchConfirm implement weight limits, center of gravity, front ballast and stability in your tractor manual.
Farmry WCAP5 PRO →386 lb · Product weight, current manual Rev1.4 p13; whether PTO shaft is included in this weight is not statedNeeds specification reviewResolve the conflicting published specifications for the exact model revision.Needs specification reviewResolve the conflicting published specifications for the exact model revision.
Woodland Mills WC46 →587 lb · Product weight, 2024 operator manual Rev C p9Preliminary spec matchConfirm implement weight limits, center of gravity, front ballast and stability in your tractor manual.Preliminary spec matchConfirm implement weight limits, center of gravity, front ballast and stability in your tractor manual.
Woodland Mills WC68 →747 lb · Product weight, 2024 operator manual Rev C p9Preliminary spec matchConfirm implement weight limits, center of gravity, front ballast and stability in your tractor manual.Preliminary spec matchConfirm implement weight limits, center of gravity, front ballast and stability in your tractor manual.
Woodland Mills TFG55 PTO →346 lb · Product weight, Rev B manual p9Needs specification reviewResolve the conflicting published specifications for the exact model revision.Needs specification reviewResolve the conflicting published specifications for the exact model revision.
Woodland Mills WC88 →900 lb · Product weight: 900 lb in current linked 2022 Rev C manual, printed p9; shipping weight is 1,054 lb. The manual does not explicitly identify whether quoted product weight includes the PTO shaft or filled hydraulic oil.Published mismatch25 PTO hp is below the 35 hp minimum.Published mismatch25 PTO hp is below the 35 hp minimum.
WoodMaxx WM-8H →Operating weight unconfirmed · Operating weight is unverified in the current official product page and linked manual. The page lists 990 lb SHIPPING weight; do not use it as operating weight. Confirm weight with PTO shaft and a filled hydraulic tank.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
WoodMaxx WM-8M →775 lb · Product page states 775 lb total weight on the three-point hitch; shaft/fluid inclusion is not explicit. Shipping sections conflict at 950 versus 990 lb. Confirm the delivered operating assembly and shipping revision.Needs specification reviewResolve the conflicting published specifications for the exact model revision.Needs specification reviewResolve the conflicting published specifications for the exact model revision.
WoodMaxx MX-8800 →Operating weight unconfirmed · Complete operating weight is unverified. Current Rev D manual (printed p45 / pdf p46, technical specifications) states approximately 772 lb DRY weight; page separately states 1,004 lb SHIPPING weight. Shaft inclusion in dry weight is not explicit. Do not substitute either figure for a confirmed shaft/oil-inclusive operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
WoodMaxx MX-9900 →Operating weight unconfirmed · Complete operating weight is unverified. Current Rev C manual (printed p42 / pdf p43, technical specifications) states approximately 816 lb DRY weight; page separately states 1,048 lb SHIPPING weight. Shaft inclusion in dry weight is not explicit. Do not substitute either figure for a confirmed shaft/oil-inclusive operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
Farmer-Helper FH-BX42 →Operating weight unconfirmed · Complete operating weight is unverified. Current index-linked manual p2 lists 430 lb net and 450 lb shipping. Current product/series pages instead list 423 lb net and 458 lb shipping. Net-weight shaft/assembly inclusions are unstated; none is substituted for a verified operating load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
Farmer-Helper FH-BX62S →Operating weight unconfirmed · Complete operating weight is unverified. Current index-linked manual p2: 830 lb net / 860 lb shipping. Current series page: 835 lb net / 915 lb gross. Product page calls 835 lb both total and gross; older product-linked manual p38 gives 797 lb net / 850 lb gross. Shaft/assembly inclusions are unstated, so no reference is used as operating weight.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.Needs specification reviewConfirm the complete operating weight; a shipping weight cannot establish the attachment load.
Wallenstein BX36S →Operating weight unconfirmed · Official page Total Weight and Jan-2025 manual Weight: 395 lb. Neither states whether the supplied shaft and all operating equipment are included; complete operating and separate shipping weights remain unverified.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
Wallenstein BX52S →Operating weight unconfirmed · Official page Total Weight and Jan-2025 manual Weight: 505 lb. Neither states whether the supplied shaft and all operating equipment are included; complete operating and separate shipping weights remain unverified.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
Wallenstein BX72S →Operating weight unconfirmed · Current official page Total Weight and Jan-2025 manual Weight: 728 lb. Neither defines complete shaft-inclusive operating mass or a separate shipping weight. Confirm the assembled operating load; do not relabel 728 lb as dry or shipping weight.Published mismatch30 engine hp is below the 50 hp minimum.Published mismatch30 engine hp is below the 50 hp minimum.
Wallenstein BX102S →1143 lb · Total Weight 1143 lb (519 kg) on the current page and in the Jan-2025 BX-S manual. Neither says whether the PTO shaft is included; confirm the assembled operating load.Published mismatch30 engine hp is below the 80 hp minimum.Published mismatch30 engine hp is below the 80 hp minimum.
Wallenstein BX52RI →845 lb · Total weight 845 lb on the current page and operating weight 845 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.Needs specification reviewConfirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
Wallenstein BX72RI →1300 lb · Total weight 1,300 lb on the current page and operating weight 1,300 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included.Published mismatch30 engine hp is below the 45 hp minimum.Published mismatch30 engine hp is below the 45 hp minimum.
Wallenstein BX102RI →1950 lb · Total weight 1,950 lb on the current page and operating weight 1,950 lb in the BXR manual §10.1. Neither says whether the PTO shaft is included.Published mismatch30 engine hp is below the 75 hp minimum.Published mismatch30 engine hp is below the 75 hp minimum.
GO DEEPER

WoodMaxx MX-9900 vs Farmer-Helper FH-BX62S: two 25-PTO-hp chippers, $4,598 apart

With 26–30 PTO hp, is MX-9900’s hydrostatic feed and 9-inch opening worth almost three times FH-BX62S’s price?

Read the guide →FIELD GUIDE

Before-you-buy checklist

Take the complete setup, not just a horsepower number, to the manufacturer.

Read the guide →

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 14, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. TYM 3015R North America product brochure (PDF created August 2025)PDF p4 Technical specifications: gross engine power, PTO power, rated engine speed, transmission, category 3-point hitch, hitch lift capacity and hitch lift capacity at 24 inches behind link ends, weight with ROPS
  2. TYM 3015R current North America product pageTechnical Specifications: engine power, hitch lift capacity, weight with ROPS
  3. Official WM-8H product page: power, feed, hitch and price19 PTO hp minimum; full 8-inch at 50 PTO hp; price
  4. WoodMaxx WM-8M official product page19 PTO hp minimum; 50+ PTO hp full capacity
  5. Official MX-8800 page: power/capacity claims, feed, hitch and current sale price20 PTO hp minimum; full 8-inch at “50+ HP”; price
  6. WoodMaxx MX-9900 official product pageHorsepower and full-capacity statements
  7. Woodland Mills WC68 official product pageCapacity, including full-diameter/full-infeed-speed condition; price
  8. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sectionsPrinted p9: 20–50 PTO hp; 747 lb
  9. Woodland Mills WC88 official U.S. page35–100+ PTO hp; capacity, including full-diameter/full-speed condition; hydraulic infeed; price
  10. Woodland Mills WC46 official product page15–30 PTO hp
  11. Woodland Mills WC46 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sectionsPrinted p9: 15–30 PTO hp; 587 lb
  12. Woodland Mills TFG55 PTO official U.S. product page12–30 PTO hp; 5-inch capacity; price
  13. Woodland Mills TFG55 PTO operator manual, Rev B, 15-Oct-2024 — Printed p9 weight/minimum HP; p11 hitch paragraph; p13 included partsRev B p9: 12–30 PTO hp, 346 lb product weight; p11 hitch paragraph: 15–30 PTO hp
  14. Farmry WCAP5 operator manual, Rev 1.5Printed p19: Engine HP Range 15–45, chipping capacity and 5 × 9-in. opening; p20: mounting (Category I/II), rated 540–1000 rpm, net weight with PTO shaft
  15. Farmry WCAP5 official product pageCompatibility FAQ (15–45 engine HP); capacity FAQ (5 in. fresh, 4 in. dry)
  16. Farmry WCAP5 PRO operator manual, Rev 1.4Printed p21: 15–45 PTO HP for Category 1; p22: 20–50 PTO HP for Cat 1N
  17. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3Printed p2: 15 PTO hp minimum, 45 Max PTO HP, 4 × 10-in. feed capacity, 430 lb net
  18. Wallenstein BX52S official U.S. pageEngine HP Range
  19. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40pp14, 18–22: HP range 22–55, Category I mounting, 5-inch capacity, 505 lb
  20. Wallenstein BX36S official U.S. pageEngine HP Range
  21. Wallenstein BX72S official U.S. pageEngine HP Range; Mounting System (Cat I and II); Total Weight; Discharge Chute Height
  22. Wallenstein BXR Series Operator’s Manual, P3 PULSE V3 (Oct 2022)§10.1 table (headed BX52R/BX72R/BX102R): horsepower range 40–55 / 50–85 / 80–120 hp, hydraulic flow 3–6 / 4–8 gpm, operating weight 845 / 1300 / 1950 lb, mounting; power-pack option
  23. Wallenstein BX52RI current U.S. pageEngine HP Range 30–55; mounting; 5-in. capacity; dual hydraulic roller feed, 3–6 gpm; total weight 845 lb
  24. Official FM-54 page: Y option, displayed price, shaft and weight
  25. FM-54 manual for 2025-and-newer models, p40 specifications
  26. Current manual index: FM-54 under Models 2025 to current
  27. Official FM-62 page: exact hammer variant, price and equipment
  28. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  29. MX-8800 manual Rev D, September 18, 2026: specifications and setup
  30. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  31. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  32. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  33. Official EFGC series: fixed models and separate hydraulic-offset kits
  34. Official Betstco manual index
  35. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  36. Official FH-BX62S series page: self feed and current-manual link
  37. Product-linked older manual, Revision 1-3-2018, p38
  38. Farmry official product specifications
  39. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  40. WM-8H linked manual — assembly p20 and maintenance p29 give different fill quantities
  41. WM-8M manual linked by current WoodMaxx manual index
  42. WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
  43. Official current FH-BX42 product page: SKU, USD price and net/shipping references
  44. Official FH-BX42 series page: gravity feed and current-manual link
  45. Wallenstein BX36S support — currently linked operator, setup and shaft documents
  46. PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
  47. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  48. Wallenstein BX52S support — currently linked operator, setup and shaft documents
  49. BX72S official support page — current operator/setup documents
  50. Wallenstein BX102S current U.S. page — engine hp range, capacity, mounting system, weight and accessories
  51. BX102S official support page — current operator and parts documents
  52. BX52RI official support page — operator and parts manuals by serial number
  53. Wallenstein wood chipper lineup — engine hp ranges for R and RI models
  54. Wallenstein BX72RI current U.S. page — engine hp range, mounting, capacity, hydraulic flow and weight
  55. BX72RI official support page — operator and parts manuals by serial number
  56. Wallenstein BX102RI current U.S. page — engine hp range, mounting, capacity, hydraulic flow and weight
  57. BX102RI official support page — operator and parts manuals by serial number