TYM · COMPACT TRACTOR ATTACHMENTS
This T25 guide uses the North American two-range HST specification in TYM’s current, Aug 2025 brochure: 24.7 gross engine hp and 18.3 PTO hp. Older T25 manuals disagree on width and lift labels. Those differences matter when choosing a mower that only narrowly exceeds the tractor’s width or evaluating a chipper’s rear load.
By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test
PTO WOOD CHIPPERS FOR THE T25
7 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
PTO chipperWoodland Mills
5″ max. chip diameter · 12–30 PTO hp in table; manual hitch paragraph says 15–30 — resolve before selection
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWoodland Mills
4″ max. chip diameter · 15–30 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperFarmry
5″ max. chip diameter · 15–45 engine hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperFarmry
5″ max. chip diameter · 15–45 PTO hp
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWallenstein
3.5″ max. chip diameter · 12–30 engine hp · official U.S. page
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
1 more possible option in the full comparison table — see all.
FLAIL MOWERS FOR THE T25
6 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
Flail mowerFarmry
45.3″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
53.1″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerWoodMaxx
47″ cutting width · 15–25 PTO hp · Y-blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerFarmer-Helper
37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Flail mowerFarmer-Helper
41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
Flail mowerFarmry
61″ cutting width · 15–35 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
North America Aug 2025 brochure · 2-range HST · 4WD · ROPS
North American T25 with Yanmar 3TNV80F, two-range HST, 4WD and ROPS, using the exact T25 brochure currently linked by the manufacturer and labeled Aug 2025 in its library. Older T25NA manual differences remain visible. This is a document-scoped profile, not verification of every serial number. Excludes T264, T2025P, cab and backhoe-package assumptions.
Current brochure: 1,229.7 lb explicitly at 24 inches and 1,551.2 lb hitch lift. Older manuals: MAX 1,534 and HITCH 1,102 with no load distance.
This guide uses the current brochure’s explicitly labeled measurement. The older figures need a measurement distance and confirmation that the manual applies to your tractor before they can support a load decision.
Current brochure says 50 inches overall width and 2,046 lb with ROPS; older NA manual H3 says 52.8 inches and 1,881 lb, with other dimension differences.
Do not average or assign these differences to an unverified tire or generation change. Use both widths for illustrative screening and measure the actual tractor.
Current brochure prints 4.2 implement, 2.8 steering and 6.9 total gpm. Older NA manual gives 4.18 main and 2.77 steering.
Retain the printed 6.9 total; do not replace it with rounded-component arithmetic or treat total output as rear-implement delivery.
Current page and brochure are T25; the library separately lists T2025P and also groups older T25-named manuals there.
The selected profile remains T25. No successor equivalence or serial transition is inferred.
FOLLOW THE NUMBERS
Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB
The T25’s mower decision has two gates: 18.3 PTO hp and the width of the actual tractor. TYM’s current brochure says 50 inches overall; its older North American manual says 52.8. A 53.1-inch mower therefore has a very different nominal width surplus depending on which document applies, while a wider 55-inch FM-62 Y still misses the tractor’s PTO power.
Read the guide →FIELD GUIDEAt the T25’s documented 18.3 PTO hp, the first useful comparison is a lighter gravity-feed chipper against a heavier chipper with its own controlled hydraulic feed. The tractor’s listed standard remote does not power WC46’s onboard system, and it cannot help a machine whose minimum is 19 or 20 PTO hp.
Read the guide →