acreage.EQUIPMENT
Compare0Find equipment

TYM · COMPACT TRACTOR ATTACHMENTS

TYM T474
Attachments that fit.

The T474 puts a 48.3-hp four-cylinder engine on a 54.5-inch-wide frame, with 35.9 PTO hp. That clears 35-hp chipper minimums by 0.9 and is over the 35-hp ceiling of Farmry’s LFS mowers. Its lift at 24 inches is printed as 1,764 lb and 673 kg in the same catalog cell, which do not match.

35.9PTO hp48.3engine hp1hitch category1,764lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test

TYM T474 compact tractor
Manufacturer photo · TYM

PTO WOOD CHIPPERS FOR THE T474

Chippers that fit the T474.

12 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Farmer-Helper FH-BX42 PTO wood chipperPTO chipper

Farmer-Helper

FH-BX42

4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$1,683checked November 7, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details

6 more possible options in the full comparison table.

7 ruled out by published specs

FLAIL MOWERS FOR THE T474

Flail mowers that fit the T474.

17 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide

11 more possible options in the full comparison table — see all.

6 ruled out by published specs
Scope of this guideU.S. T474 · 12F/12R mechanical shuttle · open-station ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Use 35.9 PTO hp for PTO-rated attachments and 48.3 engine hp for engine-rated ones, and check maximums as well as minimums. Measure the tractor’s track before choosing a mower width, and get the operator manual’s 24-inch lift figure before carrying a heavy implement.

  • TYM lists 48.3 engine hp and 35.9 PTO hp (26.4 kW) for the T474 in its 2026 Series 3 catalog. The engine standard is not named.
  • 35.9 PTO hp clears Woodland Mills WC88’s 35-hp minimum by 0.9 and FM-78’s 30-hp minimum by 5.9.
  • Farmry LFS (15–35 hp) is exceeded on both engine and PTO figures, and Farmry WCAP5’s 45-engine-hp ceiling is exceeded by 3.3.
  • 48.3 engine hp clears Land Pride FM2572’s 42-hp minimum but misses FM2584’s 49 and Wallenstein BX72S’s 50.
  • Lift at 24 inches is printed “1764 lb | 673 kg”; 673 kg is about 1,484 lb. No retained attachment weight falls between the two.
  • The catalog lists a 12F/12R mechanical shuttle; the model page’s overview text describes a “Hydro-Max HST”.

Choose the exact configuration.

U.S. T474 · 12F/12R mechanical shuttle · open-station ROPS · independent PTO

35.9 PTO hp

TYM T474 open-station ROPS tractor with the 12F/12R mechanical shuttle and naturally aspirated TYM T2300N2 engine, as listed in the 2026 Series 3 catalog and the current model page. The T474C cab lists 3,607 lb. No model-year or serial cutoff is established.

Engine power
48.3 hp · 48.3 hp at 2,600 rpm, labelled “Engine power” in the TYM catalog Specification Guide with no SAE standard named. This is not PTO power.
Rear hitch
Category I (TYM catalog Specification Guide); position control
Lift at 24 inches
1,764 lb · 1,764 lb at 24 inches behind the link ends in the 2026 Series 3 Specification Guide; the same cell gives 673 kg, which is about 1,484 lb (see source conflict). 2,689.6 lb (1,220 kg) at the link ends.
Lift at link ends
2,689.6 lb
Hydraulics
7.7 gpm implement and 4.2 gpm steering, 11.9 gpm total (dual gear pump). One standard rear remote valve; outlet flow is not published.
Pressure
Not published in the reviewed catalog or model page. Obtain relief pressure and rear-remote outlet flow from the dealer and operator manual.
Find attachments for this tractor

Where the documents disagree.

Lift 24 inches behind the link ends

The 2026 Series 3 Specification Guide lists the T474’s lift at 24 inches behind the link ends as “1764 lb | 673 kg”. 1,764 lb is about 800 kg, and 673 kg is about 1,484 lb, so the two units disagree by about 280 lb. The 4815 beside it lists a consistent 2425 lb | 1100 kg.

The published pound figure (1,764 lb) is recorded. No retained attachment weight on this site falls between 1,484 and 1,764 lb, so the choice does not change a screen. Ask the dealer for the operator-manual figure before carrying a heavy implement.

Transmission type

The Series 3 Specification Guide lists the T474 as “Mechanical”, F12 × R12, with a dry single-plate clutch, and its key-specification page shows a shuttle transmission. The current model page’s overview describes a “Hydro-Max HST transmission with auto throttle”, while its own table lists F12xR12.

The specification tables agree on a 12F/12R mechanical shuttle and are used here. If a dealer offers an HST T474, ask for that configuration’s PTO rating; 35.9 PTO hp is published only for the mechanical tractor.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. TYM Catalog 2026 – Series 3 (PDF modified January 13, 2026)p20 T474 key specifications; p28 Specification Guide, T474 column: engine and PTO power, transmission, hydraulics, Category, hitch lift and lift at 24 in. behind link ends, weight
  2. TYM North America T474 model pageOverview copy; Technical Specification table (engine power, hitch lift capacity, no. of speeds, weight)
  3. Farmry official product specifications
  4. Farmry LFS Series operator manual, Rev 1.7 — Printed pp17–18 specifications; p28 tractor stability
  5. Farmry flail mower comparison table — Net-weight comparison; may exclude PTO shaft
  6. Farmry official product specifications
  7. Farmry WCAP5 operator manual, Rev 1.5 — Printed pp19–20 specifications; pp30–34 driveline checks
  8. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  9. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  10. Official U.S. WC88 page: price, capacity and drive system
  11. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  12. Official FM-62 page: exact hammer variant, price and equipment
  13. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  14. WoodMaxx manual index: Models 2025 to current
  15. Official FM-78 page: exact hammer variant, price and equipment
  16. Land Pride FM25 current North American family and model listing
  17. Official FM25 public catalog response — active models, gallery and linked documents
  18. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  19. Official FM25 brochure — printed p12 model table
  20. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  21. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

TYM T474 flail mowers: over the 35-hp line, and a 54.5-inch tractor

At 35.9 PTO hp and 48.3 engine hp, the T474 is above the 35-hp ceiling of Farmry’s LFS mowers on both readings. WoodMaxx’s FM-62 and FM-78 families are inside their PTO ranges, and Land Pride’s FM2572 depends on what its 42-hp minimum means. The T474 is also narrow, at 54.5 inches overall, so even a 55-inch mower can cover its wheels.

Read the guide →