acreage.EQUIPMENT
Compare0Find equipment

TYM · COMPACT TRACTOR ATTACHMENTS

TYM T494
Attachments that fit.

The T494 uses the same 48.3-hp engine as the T474 on a wider, heavier Series 4 frame. TYM lists 37.2 PTO hp and 3,050.6 lb of lift at 24 inches, about 1,300 lb more than the T474. Its attachment screens on power are the same as the T474’s; the larger frame changes the load and width questions.

37.2PTO hp48.3engine hp1hitch category3,050.6lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test

TYM T494 compact tractor — representative series photo
Manufacturer photo · TYM · representative series photo

PTO WOOD CHIPPERS FOR THE T494

Chippers that fit the T494.

12 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Fit details

6 more possible options in the full comparison table — see all.

7 ruled out by published specs

FLAIL MOWERS FOR THE T494

Flail mowers that fit the T494.

17 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Farmer-Helper FH-EF95 flail mowerFlail mower

Farmer-Helper

FH-EF95

37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,462checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF105 flail mowerFlail mower

Farmer-Helper

FH-EF105

41″ cutting width, inches · 16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,547checked November 14, 2026
Check current price at Farmer-Helper
Fit details
Farmer-Helper FH-EF125 flail mowerFlail mower

Farmer-Helper

FH-EF125

48″ cutting width, inches · 20–45 PTO hp on the product page; manual lists the 20-PTO-hp minimum and a 45-hp gearbox

Possible — confirm details

Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.

$1,632checked November 14, 2026
Check current price at Farmer-Helper
Fit details

11 more possible options in the full comparison table.

6 ruled out by published specs
Scope of this guideU.S. T494 · 8F/8R synchro shuttle · open-station ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Screen PTO-rated chippers and mowers against 37.2 and engine-rated ones against 48.3, and remove anything whose maximum is exceeded. The 3,050.6-lb lift rating leaves room for the heavier 8-inch chippers and 70-inch flails, subject to the complete operating weight and ballast.

  • TYM lists 48.3 engine hp and 37.2 PTO hp (27.4 kW) for the T494 in its 2025 Series 4 catalog, with an 8F/8R synchro shuttle.
  • 37.2 PTO hp clears WC88’s 35-hp minimum by 2.2 and sits 2.8 below WC68’s over-40-hp full-feed condition.
  • Farmry WCAP5’s 45-engine-hp ceiling is exceeded by 3.3; the WCAP5 Pro’s 15–45 PTO-hp range includes 37.2.
  • Wallenstein BX72S (50 engine hp) and Land Pride FM2584 (49) are out of reach; FM2572 (42) depends on whether Land Pride means engine power.
  • Lift is 3,050.6 lb at 24 inches and 3,822 lb at the link ends, with position and draft control and two rear remotes.
  • Overall width is 63.8 inches, nine inches wider than the T474.

Choose the exact configuration.

U.S. T494 · 8F/8R synchro shuttle · open-station ROPS · independent PTO

37.2 PTO hp

TYM T494 open-station ROPS tractor with the 8F/8R synchro shuttle and naturally aspirated TYM T2300N2 engine, as listed in the 2025 Series 4 catalog and the current model page. The T494C cab lists 4,198 lb. No model-year or serial cutoff is established.

Engine power
48.3 hp · 48.3 hp at 2,600 rpm, labelled “Engine power” in the TYM catalog Specification Guide with no SAE standard named. This is not PTO power.
Rear hitch
Category I (TYM catalog Specification Guide); position/draft control
Lift at 24 inches
3,050.6 lb · 3,050.6 lb (1,384 kg) at 24 inches behind the link ends and 3,822 lb (1,733 kg) at the link ends in the 2025 Series 4 Specification Guide.
Lift at link ends
3,822 lb
Hydraulics
7.7 gpm implement and 4.3 gpm steering, 11.9 gpm total (dual gear pump). Two standard rear remote valves (shown as a 4-port rear valve); outlet flow is not published.
Pressure
Not published in the reviewed catalog or model page. Obtain relief pressure and rear-remote outlet flow from the dealer and operator manual.
Find attachments for this tractor

Where the documents disagree.

Lift 24 inches behind the link ends

The Series 4 Specification Guide lists 3050.6 lb at 24 inches for both the T494 and T574, as 1384 kg for the T494 and 1387 kg for the T574. 3,050.6 lb is 1,383.7 kg.

The pound figure, identical for both models and consistent with the T494’s kilogram value, is used. The 3-kg difference does not affect any screen.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. TYM Catalog 2025 – Series 4 (PDF modified August 14, 2025)p11 T494 and p13 T574 key specifications; p24 Specification Guide, T494 and T574 columns
  2. TYM North America T494 model pageFeature callouts; Technical Specification table (T494 / T494C / T574)
  3. Farmry official product specifications
  4. Farmry WCAP5 operator manual, Rev 1.5 — Printed pp19–20 specifications; pp30–34 driveline checks
  5. Farmry official product specifications
  6. Farmry WCAP5 PRO operator manual, Rev 1.4 — Printed p13 specifications; pp21–22 conflicting horsepower paragraphs
  7. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  8. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  9. Official U.S. WC88 page: price, capacity and drive system
  10. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  11. Official FM-78 page: exact hammer variant, price and equipment
  12. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  13. WoodMaxx manual index: Models 2025 to current
  14. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  15. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  16. Wallenstein official U.S. BX52S page — explicit engine band, capacity, RPM label, reference weight and accessories
  17. Wallenstein BX52S support — currently linked operator, setup and shaft documents
  18. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40
  19. PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
  20. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  21. Land Pride FM25 current North American family and model listing
  22. Official FM25 public catalog response — active models, gallery and linked documents
  23. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  24. Official FM25 brochure — printed p12 model table

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

TYM T494 wood chippers: WC88 opens, WCAP5 is too small for the engine

The T494’s 37.2 PTO hp clears Woodland Mills WC88’s 35-hp minimum by 2.2 and sits inside the range of most PTO-rated chippers here. Its 48.3-hp engine works against it for engine-rated machines: it is over Farmry WCAP5’s 45-hp ceiling and short of Wallenstein BX72S’s 50-hp minimum. With 3,050.6 lb of lift at 24 inches, chipper weight is not the limiting figure.

Read the guide →