TYM · COMPACT TRACTOR ATTACHMENTS

TYM T574
Attachments that fit.

The T574 turbocharges the T494’s engine to 55 hp and 44.7 PTO hp. That lands it at the top of several published ranges: 0.3 hp under the 45-PTO-hp ceiling of FM-62 and FH-BX62S, and exactly on Wallenstein BX52S’s 55-engine-hp maximum. It also opens the 50-hp BX72S chipper and, on engine power, Land Pride’s 49-hp FM2584.

44.7PTO hp55engine hp1hitch category3,050.6lb lift at 24 in.

By Acreage Equipment · Reviewed November 8, 2026 · Specification research, not a field test

TYM T574 compact tractor — representative series photo
Manufacturer photo · TYM · representative series photo

PTO WOOD CHIPPERS FOR THE T574

Chippers that fit the T574.

13 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper
Wallenstein BX52S PTO wood chipperPTO chipper

Wallenstein

BX52S

5″ max. chip diameter · 22–55 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Wallenstein BX72S PTO wood chipperPTO chipper

Wallenstein

BX72S

7″ max. chip diameter · 50–85 engine hp · official U.S. page

Possible — confirm details

Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.

Check seller priceAsk for a quote
Explore buying options at Wallenstein

7 more possible options in the full comparison table — see all.

6 ruled out by published specs

FLAIL MOWERS FOR THE T574

Flail mowers that fit the T574.

18 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide

12 more possible options in the full comparison table — see all.

5 ruled out by published specs
  • Farmry LFS61 — Both engine (55) and PTO (44.7) horsepower exceed the published 35 hp maximum.
  • WoodMaxx FM-54 · Y-blades — 44.7 PTO hp exceeds the published 25 hp range.
  • Farmry LFS45 — Both engine (55) and PTO (44.7) horsepower exceed the published 35 hp maximum.
  • Farmry LFS53 — Both engine (55) and PTO (44.7) horsepower exceed the published 35 hp maximum.
  • Blue Diamond Heavy Duty 403740 — Both engine (55) and PTO (44.7) horsepower are below the published 75 hp minimum.
Scope of this guideU.S. T574 · 8F/8R synchro shuttle (spec table) · turbo · open-station ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Check every maximum before every minimum on this tractor. Attachments rated to 45 PTO hp or 55 engine hp are inside by a fraction of a horsepower and should be confirmed in writing; those starting at 49–50 hp are newly available if the maker’s basis matches.

  • TYM lists 55 engine hp (turbo T2300T2) and 44.7 PTO hp (32.9 kW) for the T574 in its 2025 Series 4 catalog. The engine standard is not named.
  • 44.7 is 0.3 hp under the 45-PTO-hp maximum of WoodMaxx FM-62, Farmer-Helper FH-BX62S and Farmry WCAP5 Pro (Category 1).
  • 55 engine hp equals Wallenstein BX52S’s 55-hp maximum and clears BX72S’s 50-hp minimum by 5.
  • Land Pride FM2584 (49–80 hp) is cleared on engine power and missed by 4.3 hp on PTO power; Farmry LFP47 (25–45) is the reverse.
  • The catalog table lists an 8F/8R synchro shuttle, but its key-specification page and the model page show a “3-range hydrostatic transmission”.
  • Lift matches the T494: 3,050.6 lb at 24 inches, 3,822 lb at the link ends. The table’s 141.3-inch ROPS height repeats the overall-length figure.

Choose the exact configuration.

U.S. T574 · 8F/8R synchro shuttle (spec table) · turbo · open-station ROPS · independent PTO

44.7 PTO hp

TYM T574 open-station ROPS tractor with the turbocharged TYM T2300T2 engine, as listed in the 2025 Series 4 catalog Specification Guide and the current model page table (synchro shuttle, F8 × R8). The T574C cab is a separate configuration. No model-year or serial cutoff is established.

Engine power
55 hp · 55.0 hp at 2,600 rpm, labelled “Engine power” in the TYM catalog Specification Guide with no SAE standard named. This is not PTO power.
Rear hitch
Category I (TYM catalog Specification Guide); position/draft control
Lift at 24 inches
3,050.6 lb · 3,050.6 lb (1,387 kg in the T574 column) at 24 inches behind the link ends and 3,822 lb (1,733 kg) at the link ends in the 2025 Series 4 Specification Guide.
Lift at link ends
3,822 lb
Hydraulics
7.7 gpm implement and 4.3 gpm steering, 11.9 gpm total (dual gear pump). Two standard rear remote valves; outlet flow is not published.
Pressure
Not published in the reviewed catalog or model page. Obtain relief pressure and rear-remote outlet flow from the dealer and operator manual.
Find attachments for this tractor

Where the documents disagree.

Transmission type

The 2025 Series 4 Specification Guide and the current model page table list the T574 as a synchro-shuttle, F8 × R8, with a dry single-plate clutch. The catalog’s T574 key-specification page and the model page feature callouts show a “3-range hydrostatic transmission”. The T494 pages show an “8F × 8R gear transmission” in the same position.

The specification tables are used. 44.7 PTO hp is published once for the T574 with no transmission split; confirm which transmission the tractor on offer has and the PTO rating for it.

Lift 24 inches behind the link ends

The Series 4 Specification Guide lists 3050.6 lb at 24 inches for both the T494 and T574, as 1384 kg for the T494 and 1387 kg for the T574. 3,050.6 lb is 1,383.7 kg.

The pound figure, identical for both models and consistent with the T494’s kilogram value, is used. The 3-kg difference does not affect any screen.

Height to top of ROPS

The Series 4 Specification Guide lists the T574’s ROPS height as 141.3 in. | 3590 mm, the same value as its overall length with three-point hitch. The T494, on the same frame, lists 102.1 in. | 2594 mm.

141.3 inches appears to be copied from the length row and is not used. Measure the tractor for shed and gate clearance; height does not change an attachment screen.

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 8, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. TYM Catalog 2025 – Series 4 (PDF modified August 14, 2025)p11 T494 and p13 T574 key specifications; p24 Specification Guide, T494 and T574 columns
  2. TYM North America T574 model pageFeature callouts (“3-range hydrostatic transmission”); Technical Specification table (no. of speeds F8 x R8)
  3. Farmry official product specifications
  4. Farmry WCAP5 PRO operator manual, Rev 1.4 — Printed p13 specifications; pp21–22 conflicting horsepower paragraphs
  5. Official U.S. WC88 page: price, capacity and drive system
  6. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  7. Official FM-62 page: exact hammer variant, price and equipment
  8. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  9. WoodMaxx manual index: Models 2025 to current
  10. Official FM-78 page: exact hammer variant, price and equipment
  11. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  12. Official FH-BX62S series page: self feed and current-manual link
  13. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  14. Product-linked older manual, Revision 1-3-2018, p38
  15. Betstco official manual index
  16. Wallenstein official U.S. BX52S page — explicit engine band, capacity, RPM label, reference weight and accessories
  17. Wallenstein BX52S support — currently linked operator, setup and shaft documents
  18. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,28,30,40
  19. PTO shaft installation Z97844_En, Rev Aug-2024 — p6 sizing with a quick hitch attached
  20. BX-S setup instructions Z97085_SI, Rev Feb-2019 — assembly and shipment handling
  21. Wallenstein BX72S current U.S. page — engine power, current hitch categories, capacity, accessories and reference mass
  22. BX72S official support page — current operator/setup documents
  23. Land Pride FM25 current North American family and model listing
  24. Official FM25 public catalog response — active models, gallery and linked documents
  25. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  26. Official FM25 brochure — printed p12 model table
  27. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  28. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.