Yanmar · COMPACT TRACTOR ATTACHMENTS

Yanmar YT347
Attachments that fit.

The Yanmar YT347 has 46 gross hp, an i-HMT transmission and a Category 1 hitch lifting 2,756 lb at 24 inches. Yanmar rates it 39.5 PTO hp at working speed and 36.4 at zero ground speed, both just short of Woodland Mills WC68’s over-40 full-feed line; its engine is 1 over Farmry WCAP5’s 45.

39.5PTO hp46engine hp1hitch category2,756lb lift at 24 in.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Yanmar YT347 hub: Yanmar YT347 compact tractor with ROPS, studio photo
Manufacturer photo · Yanmar

PTO WOOD CHIPPERS FOR THE YT347

Chippers that fit the YT347.

12 of 19 pto wood chippers we track pass the published power, hitch and speed screen. “Specs line up” cards come first.

Full chipper guide
Farmer-Helper FH-BX62S PTO wood chipperPTO chipper

Farmer-Helper

FH-BX62S

6.5″ manual feed-opening short side, inches · 25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained

Possible — confirm details

Confirm the complete operating weight; a shipping weight cannot establish the attachment load.

$2,392checked November 7, 2026
Check current price at Farmer-Helper

6 more possible options in the full comparison table — see all.

7 ruled out by published specs

FLAIL MOWERS FOR THE YT347

Flail mowers that fit the YT347.

17 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide

11 more possible options in the full comparison table — see all.

6 ruled out by published specs
Scope of this guideU.S. YT347 · i-HMT (integrated hydro-mechanical) · 4WD · ROPS · independent PTO. Each configuration below states the model and equipment covered by its sources.

Woodland Mills WC68 and WC88, WoodMaxx’s chippers, Farmer-Helper FH-BX, Farmry WCAP5 Pro and Wallenstein BX52S fit for chipping. WoodMaxx FM-62 and FM-78, Farmer-Helper FH-EFGC, TMG and Land Pride FM2560 and FM2572 fit for mowing.

  • Sell sheet and page: 46 gross hp; 39.5 PTO hp at working speed, 36.4 at zero speed; Category 1.
  • Lift: 2,756 lb at 24 inches; 3,307 lb standard.
  • Woodland Mills WC68 full feed (over 40): 0.5 / 3.6 short.
  • Woodland Mills WC88 (35 PTO hp): inside on both figures.
  • Farmry WCAP5 (to 45 engine hp): 1 over.
  • The YM347 has 35.5 PTO hp from the same 46 gross hp.

Choose the exact configuration.

U.S. YT347 · i-HMT (integrated hydro-mechanical) · 4WD · ROPS · independent PTO

39.5 PTO hp

Current U.S. Yanmar YT347 (ROPS) from Yanmar’s YT3 sheet and brochure and the current page. 3,880 lb with ROPS, R4 tires and fluids; 70.6 in. wide.

Engine power
46 hp · 46 hp gross power (EPA regulation) in Yanmar’s sheet and on the current page. It is not PTO power.
Rear hitch
Category 1
Lift at 24 inches
2,756 lb · 2,756 lbf “3-point lift capacity at 24" (61 cm)” and 3,307 lbf standard in Yanmar’s sheet.
Lift at link ends
3,307 lb
Hydraulics
See the Yanmar sheet.
Pressure
Not published in the reviewed sheet.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Yanmar 2023 YT3 sell sheet (PDF created October 3, 2023)Specifications: Gross Power 46 / 58.9 HP; PTO Power at Working Speed 39.5 / 52.0 HP; PTO Power at Zero Speed 36.4 / 48.9 HP; 3-point hitch Category 1; 3-point lift capacity (std.) 3,307 lbf; at 24" (61 cm) 2,756 lbf
  2. Yanmar YT347 current U.S. product pageGross Power 46 HP; PTO Power 39.5 HP; 3-Point Hitch Category 1
  3. Farmry official product specifications
  4. Farmry WCAP5 PRO operator manual, Rev 1.4 — Printed p13 specifications; pp21–22 conflicting horsepower paragraphs
  5. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  6. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  7. Official U.S. WC88 page: price, capacity and drive system
  8. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  9. Official LFP47 product page: configuration, weight and price
  10. LFP Series operator manual, Rev 1.3, printed pp17–20
  11. Official FM-78 page: exact hammer variant, price and equipment
  12. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  13. WoodMaxx manual index: Models 2025 to current
  14. Official current FH-BX62S product page: exact SKU, USD price and conflicting power/weight text
  15. Official FH-BX62S series page: self feed and current-manual link
  16. Current index-linked FH-BX42 & 62 manual, printed p2 / PDF p3
  17. Product-linked older manual, Revision 1-3-2018, p38
  18. Betstco official manual index
  19. Official fixed FM-62 page: exact black/Y option, USD price, blade guidance and conflicts
  20. Land Pride FM25 current North American family and model listing
  21. Official FM25 public catalog response — active models, gallery and linked documents
  22. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  23. Official FM25 brochure — printed p12 model table
  24. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  25. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.