Flail mowerSTART WITH WHAT YOU HAVE
Your tractor. Your shortlist.
Choose your exact model and transmission. We’ll compare documented requirements and show what needs confirmation before you buy.
42 attachments
Flail mower
Flail mower
Flail mower
PTO chipper
PTO chipper
PTO chipper
PTO chipper
PTO chipperWoodland Mills
TFG55 PTOA gravity-feed chipper with a 5 × 5-inch opening and separate chipping and throwing flywheels.
5″max. chip diameter12–30PTO hp346lb unit weight
Power specification notes
12–30 PTO hp in table; manual hitch paragraph says 15–30 — resolve before selection
$2,415Details
Checked November 7, 2026
Flail mower
PTO chipperWoodland Mills
WC88A Category 1 chipper with an 8-inch capacity and a self-contained hydraulic feed system. Its belt drive increases flywheel speed while the tractor PTO stays at 540 rpm.
8″Maximum branch diameter, inches35–100+PTO hp900lb unit weight
Power specification notes
35–100+ PTO hp
$3,995Details
Checked November 7, 2026
Flail mower
Flail mower
PTO chipperWoodMaxx
WM-8HAn 8-inch chipper with two hydraulically driven feed rollers, variable feed speed and reverse. Its self-contained hydraulic system does not use tractor remotes.
8″max. chip diameter19 min.PTO hpUnconfirmedunit weight
Power specification notes
19 PTO hp minimum; maximum not stated
$4,095Details
Checked November 7, 2026
PTO chipperWoodMaxx
WM-8MAn 8-inch chipper whose feed roller is powered mechanically through a gearbox and driveshaft. Feed is fixed at a published 58 ft/min with a stop control, rather than hydraulic speed adjustment.
8″max. chip diameter19 min.PTO hp775lb unit weight
Power specification notes
19 PTO hp minimum; maximum not stated
$3,690Details
Checked November 7, 2026
Flail mowerWoodMaxx
FM-54 · Y-bladesThe Y-blade FM-54 has a 47-inch cut, fixed offset and a manual-specified 15–25 PTO hp range. This record covers the Y-blade configuration; the hammer version has a 20 PTO hp minimum.
47″cutting width15–25PTO hp408lb unit weight
Power specification notes
15–25 PTO hp · Y-blades only
$2,990Details
Checked November 7, 2026
Flail mowerWoodMaxx
FM-62H · Hammer bladesA 55-inch cutting-width flail with hydraulic side shift and 18 individual hammer blades. The current manual specifies 24–45 PTO hp for this configuration; tractor rear remotes are required.
55″Cutting width, inches24–45PTO hp860lb unit weight
Power specification notes
24–45 PTO hp · Hammer blades only
$4,230Details
Checked November 7, 2026
Flail mowerWoodMaxx
FM-78H · Hammer bladesA 70-inch cutting-width flail with hydraulic side shift and 22 individual hammer blades. The current manual specifies 30–65 PTO hp for this configuration; tractor rear remotes are required.
70″Cutting width, inches30–65PTO hp968lb unit weight
Power specification notes
30–65 PTO hp · Hammer blades only
$4,620Details
Checked November 7, 2026
Flail mowerWoodMaxx
FM-62 · Hammer bladesA fixed-offset 55-inch cutting-width flail with 18 individual hammer blades and a 24–45 PTO hp manual range. It has no hydraulic side shift and needs no rear-remote connection for offset adjustment.
55″Cutting width, inches24–45PTO hp774lb unit weight
Power specification notes
24–45 PTO hp · Hammer blades only
$3,630Details
Checked November 7, 2026
Flail mowerWoodMaxx
FM-78 · Hammer bladesA fixed-offset 70-inch cutting-width flail with 22 individual hammer blades and a 30–65 PTO hp manual range. It has no hydraulic side shift and needs no rear-remote connection for offset adjustment.
70″Cutting width, inches30–65PTO hp880lb unit weight
Power specification notes
30–65 PTO hp · Hammer blades only
$3,900Details
Checked November 7, 2026
PTO chipperWoodMaxx
MX-8800An up-to-8-inch PTO chipper with self-contained hydrostatic feed, operator-adjustable speed and reverse, and 2 reversible flywheel knives. The manual requires at least 20 PTO hp at 540 rpm.
8″Maximum chip diameter, inches20 min.PTO hpUnconfirmedunit weight
Power specification notes
20 PTO hp minimum; maximum not stated
$5,890Details
Checked November 7, 2026
PTO chipperWoodMaxx
MX-9900An up-to-9-inch PTO chipper with self-contained hydrostatic feed, operator-adjustable speed and reverse, and 4 reversible flywheel knives. The manual requires at least 25 PTO hp at 540 rpm.
9″Maximum chip diameter, inches25 min.PTO hpUnconfirmedunit weight
Power specification notes
25 PTO hp minimum; maximum not stated
$6,990Details
Checked November 7, 2026
Flail mowerFarmer-Helper
FH-EFGC125 · Hammer bladesA 48-inch cutting-width Cat 1 flail sold by Betstco with 20 hammers in the described configuration and an included shear-bolt PTO shaft. Its current page states 22–65 PTO hp, but the linked manual conflicts on power basis and limits; confirm the delivered specification.
48″Cutting width, inches22–65PTO hpUnconfirmedunit weight
Power specification notes
22–65 PTO hp on current page; linked-manual basis/limit conflicts
$2,040Details
Checked November 7, 2026
Flail mowerFarmer-Helper
FH-EFGC155 · Hammer bladesA 60-inch cutting-width Cat 1 flail sold by Betstco with 24 hammers in the described configuration and an included shear-bolt PTO shaft. Its current page states 25–65 PTO hp, but the linked manual conflicts on power basis and limits; confirm the delivered specification.
60″Cutting width, inches25–65PTO hpUnconfirmedunit weight
Power specification notes
25–65 PTO hp on current page; linked-manual basis/limit conflicts
$2,408Details
Checked November 7, 2026
PTO chipperFarmer-Helper
FH-BX42A gravity/pinch-and-pull chipper with a published 4 × 10-inch feed capacity, four reversible rotor knives and Cat 1 mounting. The current index-linked manual specifies 15–45 PTO hp at 540 rpm, while the product page and older linked manual retain different power wording.
4″Published feed-capacity short side, inches15–45PTO hpUnconfirmedunit weight
Power specification notes
15–45 PTO hp in current index-linked manual; older/page conflicts retained
$1,683Details
Checked November 7, 2026
PTO chipperFarmer-Helper
FH-BX62SThe FH-BX62S is marketed as a 7-inch chipper, while the current linked manual specifies 6.5 × 12-inch material feed capacity. It uses gravity/pinch-and-pull feed, four reversible rotor knives, Cat 1 mounting and a current-manual 25–45 PTO hp band at 540 rpm.
6.5″Manual feed-opening short side, inches25–45PTO hpUnconfirmedunit weight
Power specification notes
25–45 PTO hp in current index-linked manual; older capacity/range conflicts retained
$2,392Details
Checked November 7, 2026
Flail mowerWoodMaxx
FM-62 · Y-bladesA fixed-offset 55-inch cutting-width flail with 18 Y-blade sets and a current-manual 20–45 PTO hp range. This is the separately offered black/Y configuration; it has no hydraulic side shift.
55″Cutting width, inches20–45PTO hpUnconfirmedunit weight
Power specification notes
20–45 PTO hp · Y-blades only
$3,630Details
Checked November 7, 2026
Flail mowerWoodMaxx
FM-78 · Y-bladesA fixed-offset 70-inch cutting-width flail with 22 Y-blade sets and a current-manual 30–65 PTO hp range. This is the separately offered black/Y configuration; it has no hydraulic side shift.
70″Cutting width, inches30–65PTO hpUnconfirmedunit weight
Power specification notes
30–65 PTO hp · Y-blades only
$3,900Details
Checked November 7, 2026
PTO chipper
PTO chipper
PTO chipperWallenstein
BX72SA 7-inch gravity-feed PTO chipper with a folding hopper, an 82-inch published discharge height and a 50–85 engine-hp range.
7″max. chip diameter50–85engine hpUnconfirmedunit weight
Power specification notes
50–85 engine hp · official U.S. page
Check seller priceDetails
Check seller pricing
FM25 series · FM2572 shownLand Pride
FM2560 · hammer rotorA 60-inch PTO flail mower configured with 16 hammer blades, fixed center/right-offset hitch positions and a published 33–80 tractor-hp band whose engine/PTO basis is not stated.
60″cutting width33–80hp · verify basisUnconfirmedunit weight
Power specification notes
33–80 tractor hp · engine/PTO basis unspecified
Check seller priceDetails
Check seller pricing
FM25 series · FM2572 shownLand Pride
FM2572 · hammer rotorA 72-inch PTO flail mower configured with 20 hammer blades, fixed center/right-offset hitch positions and a published 42–80 tractor-hp band whose engine/PTO basis is not stated.
72″cutting width42–80hp · verify basisUnconfirmedunit weight
Power specification notes
42–80 tractor hp · engine/PTO basis unspecified
Check seller priceDetails
Check seller pricing
FM25 series · FM2572 shownLand Pride
FM2584 · hammer rotorAn 84-inch PTO flail mower configured with 24 hammer blades, fixed center/right-offset hitch positions and a published 49–80 tractor-hp band whose engine/PTO basis is not stated.
84″cutting width49–80hp · verify basisUnconfirmedunit weight
Power specification notes
49–80 tractor hp · engine/PTO basis unspecified
Check seller priceDetails
Check seller pricing
PTO chipperWallenstein
BX102SA 10-inch gravity-feed PTO disc chipper with a 36-inch rotor, an 89-inch discharge and an 80–120 engine-hp range on a Category II hitch.
10″max. chip diameter80–120engine hp1143lb unit weight
Power specification notes
80–120 engine hp · official U.S. page
Check seller priceDetails
Check seller pricing
Flail mowerBlue Diamond
Heavy Duty 403740An 87-inch heavy-duty flail mower for Category I or II tractors in a 75–100 hp range, with 18 inches of hydraulic side shift as standard.
87″cutting width75–100hp · verify basis1763lb unit weight
Power specification notes
75–100 HP recommended (basis not stated) · spec sheet and manual
Check seller priceDetails
Check seller pricing
Flail mower
Flail mowerFarmer-Helper
FH-EF95A 37-inch standard-duty Category I flail with Y-blades and an included PTO shaft, rated 15–45 PTO hp: sized for the smallest sub-compact tractors.
37″Cutting width, inches15–45PTO hp330lb unit weight
Power specification notes
15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
$1,462Details
Checked November 14, 2026
Flail mowerFarmer-Helper
FH-EF105A 41-inch standard-duty Category I flail with Y-blades and an included PTO shaft, rated 16–45 PTO hp for sub-compact and small compact tractors.
41″Cutting width, inches16–45PTO hp347lb unit weight
Power specification notes
16–45 PTO hp on the product page; manual lists the 16-PTO-hp minimum and a 45-hp gearbox
$1,547Details
Checked November 14, 2026
Flail mowerFarmer-Helper
FH-EF125A 48-inch standard-duty Category I flail with Y-blades and an included PTO shaft, rated 20–45 PTO hp for compact tractors around 20–30 hp.
48″Cutting width, inches20–45PTO hp390lb unit weight
Power specification notes
20–45 PTO hp on the product page; manual lists the 20-PTO-hp minimum and a 45-hp gearbox
$1,632Details
Checked November 14, 2026
PTO chipperWallenstein
BX52RIA 5-inch PTO disc chipper with dual hydraulic feed rollers, a 25-inch rotor and a 30–55 engine-hp range on its current page.
5″max. chip diameter30–55engine hp845lb unit weight
Power specification notes
30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)
Check seller priceDetails
Check seller pricing
PTO chipperWallenstein
BX72RIA 7-inch PTO disc chipper with dual hydraulic feed rollers, a 28-inch rotor and a 45–85 engine-hp range on its current page.
7″max. chip diameter45–85engine hp1300lb unit weight
Power specification notes
45–85 engine hp · current U.S. page (manual table: 50–85 hp for the BX72R)
Check seller priceDetails
Check seller pricing
PTO chipperWallenstein
BX102RIA 10-inch PTO disc chipper with dual hydraulic feed rollers, a 36-inch rotor and a 75–120 engine-hp range on its current page.
10″max. chip diameter75–120engine hp1950lb unit weight
Power specification notes
75–120 engine hp · current U.S. page (manual table: 80–120 hp for the BX102R)
Check seller priceDetails
Check seller pricing
Dated prices show when they were checked. Other products require a current quote. Prices exclude any unconfirmed shipping, tax, accessories, and assembly costs. Stock is not tracked live.