Case IH · COMPACT TRACTOR ATTACHMENTS

Case IH Farmall Utility 60A
Attachments that fit.

The Case IH Farmall Utility 60A has 60 engine hp, 51 PTO hp and a Category 1/2 hitch lifting 2,701 lb at 24 inches. Its 51 PTO hp is 1 over TMG’s 50-PTO-hp manual cap and Woodland Mills WC68’s 50-hp maximum, and clears WoodMaxx’s 50+ full-capacity line.

51PTO hp60engine hp1 & 2hitch category2,701lb lift at 24 in.

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Case IH Farmall Utility 60A hub: Farmall Utility 60A utility tractor product photo
Manufacturer photo · Case IH

PTO WOOD CHIPPERS FOR THE FARMALL UTILITY 60A

Chippers that fit the Farmall Utility 60A.

7 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Woodland Mills WC88 PTO wood chipperPTO chipper

Woodland Mills

WC88

8″ maximum branch diameter, inches · 35–100+ PTO hp

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,995checked November 7, 2026
Check current price at Woodland Mills
Wallenstein BX72S PTO wood chipperPTO chipper

Wallenstein

BX72S

7″ max. chip diameter · 50–85 engine hp · official U.S. page

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
WoodMaxx MX-8800 PTO wood chipperPTO chipper

WoodMaxx

MX-8800

8″ maximum chip diameter, inches · 20 PTO hp minimum; maximum not stated

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$5,890checked November 7, 2026
Check current price at WoodMaxx
WoodMaxx WM-8M PTO wood chipperPTO chipper

WoodMaxx

WM-8M

8″ max. chip diameter · 19 PTO hp minimum; maximum not stated

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,690checked November 7, 2026
Check current price at WoodMaxx
Wallenstein BX72RI PTO wood chipperPTO chipper

Wallenstein

BX72RI

7″ max. chip diameter · 45–85 engine hp · current U.S. page (manual table: 50–85 hp for the BX72R)

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

Check seller priceAsk for a quote
Explore buying options at Wallenstein

1 more possible option in the full comparison table — see all.

12 ruled out by published specs

FLAIL MOWERS FOR THE FARMALL UTILITY 60A

Flail mowers that fit the Farmall Utility 60A.

9 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
WoodMaxx FM-78 · Y-blades flail mowerFlail mower

WoodMaxx

FM-78 · Y-blades

70″ cutting width, inches · 30–65 PTO hp · Y-blades only

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,900checked November 7, 2026
Check current price at WoodMaxx

3 more possible options in the full comparison table — see all.

14 ruled out by published specs
Scope of this guideU.S. Farmall Utility 60A · 8x8 mechanical shuttle · MFD · ROPS · independent PTO 540/540E. Each configuration below states the model and equipment covered by its sources.

Woodland Mills WC88, WoodMaxx’s chippers and Wallenstein BX72S fit for chipping. WoodMaxx FM-78, Farmer-Helper FH-EFGC and all three Land Pride FM25 widths fit for mowing.

  • Brochure and page: 60 engine hp, 51 PTO hp; Category 1/2.
  • Lift: 2,701 lb at 24 inches behind the pin.
  • TMG TFM60 / TFMS50 (50 PTO hp manual cap): 1 over.
  • Woodland Mills WC68 (to 50 PTO hp): 1 over.
  • WoodMaxx full chipper capacity (50+ PTO hp): reached.
  • Wallenstein BX52S (to 55 engine hp): 5 over.

Choose the exact configuration.

U.S. Farmall Utility 60A · 8x8 mechanical shuttle · MFD · ROPS · independent PTO 540/540E

51 PTO hp

Current U.S. Case IH Farmall Utility 60A (ROPS, 2.2-L three-cylinder engine) from the August 2026 utility brochure and the current model page. 5,060 lb MFD without ballast.

Engine power
60 hp · 60 engine hp at rated engine rpm (2,600) in Case IH’s August 2026 utility brochure; the current page agrees. It is not PTO power.
Rear hitch
Category 1 / 2
Lift at 24 inches
2,701 lb · 2,701 lb standard lift capacity “measured @ 24 in. behind pin” in the August 2026 utility brochure.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
See the brochure’s implement pump figure.
Pressure
Not published in the reviewed brochure.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Case IH Farmall utility tractors brochure (PDF created August 21, 2026)Small Utility Specifications: Engine HP, PTO HP, 3-point Hitch Category 1/2, Lift Capacity (footnote 2: measured @ 24 in. behind pin), transmission, weight
  2. Case IH Farmall Utility 60A current U.S. product page60 engine HP and 51 PTO HP
  3. Official U.S. WC88 page: price, capacity and drive system
  4. Current linked WC88 operator manual, Rev C, 22-Aug-2022
  5. Official WM-8M page: configuration, 775 lb hitch weight and price
  6. WM-8M manual linked by current WoodMaxx manual index
  7. WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
  8. Official FM-78 page: exact hammer variant, price and equipment
  9. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  10. WoodMaxx manual index: Models 2025 to current
  11. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  12. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  13. Official Betstco FH-EFGC155 product page: exact model, current USD offer, dimensions and conflicting specifications
  14. Currently linked EFGC standard manual, Revision 12-12-17, pp16–23
  15. Official EFGC series: fixed models and separate hydraulic-offset kits
  16. Official Betstco manual index
  17. Wallenstein BX72S current U.S. page — engine power, current hitch categories, capacity, accessories and reference mass
  18. BX72S official support page — current operator/setup documents
  19. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,26,28,30,40
  20. PTO shaft instructions Z97844_En, Rev Aug-2024 — tractor/quick-hitch sizing
  21. Land Pride FM25 current North American family and model listing
  22. Official FM25 public catalog response — active models, gallery and linked documents
  23. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  24. Official FM25 brochure — printed p12 model table
  25. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  26. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.