acreage.EQUIPMENT
Compare0Find equipment

Case IH · COMPACT TRACTOR ATTACHMENTS

Case IH Farmall Utility 65C
Attachments that fit.

The Case IH Farmall Utility 65C is a cab tractor with a 3.4-L four-cylinder engine, 64 engine hp, 50 PTO hp and a Category 1/2 hitch lifting 3,956 lb at 24 inches. Like the 65A, its 50 PTO hp sits exactly on TMG’s 50-hp manual cap and Woodland Mills WC68’s maximum.

50PTO hp64engine hp1 & 2hitch category3,956lb lift at 24 in.
Wood chippers that fitFlail mowers that fit

By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

Case IH Farmall Utility 65C hub: Farmall Utility 65C utility tractor product photo
Manufacturer photo · Case IH

PTO WOOD CHIPPERS FOR THE FARMALL UTILITY 65C

Chippers that fit the Farmall Utility 65C.

8 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full chipper guide
WoodMaxx WM-8M PTO wood chipperPTO chipper

WoodMaxx

WM-8M

8″ max. chip diameter · 19 PTO hp minimum; maximum not stated

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,690checked November 7, 2026
Check current price at WoodMaxx
Fit details
WoodMaxx MX-9900 PTO wood chipperPTO chipper

WoodMaxx

MX-9900

9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$6,990checked November 7, 2026
Check current price at WoodMaxx
Fit details
Woodland Mills WC88 PTO wood chipperPTO chipper

Woodland Mills

WC88

8″ maximum branch diameter, inches · 35–100+ PTO hp

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,995checked November 7, 2026
Check current price at Woodland Mills
Fit details
Wallenstein BX72S PTO wood chipperPTO chipper

Wallenstein

BX72S

7″ max. chip diameter · 50–85 engine hp · official U.S. page

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

Check seller priceAsk for a quote
Explore buying options at Wallenstein
Fit details
WoodMaxx MX-8800 PTO wood chipperPTO chipper

WoodMaxx

MX-8800

8″ maximum chip diameter, inches · 20 PTO hp minimum; maximum not stated

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$5,890checked November 7, 2026
Check current price at WoodMaxx
Fit details
Woodland Mills WC68 PTO wood chipperPTO chipper

Woodland Mills

WC68

6″ max. chip diameter · 20–50 PTO hp

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$3,450checked November 7, 2026
Check current price at Woodland Mills
Fit details

2 more possible options in the full comparison table — see all.

11 ruled out by published specs

FLAIL MOWERS FOR THE FARMALL UTILITY 65C

Flail mowers that fit the Farmall Utility 65C.

11 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.

Full flail mower guide
TMG Industrial TMG-TFM60 flail mowerFlail mower

TMG Industrial

TMG-TFM60

60″ cutting width · 30–60 hp · basis unclear

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$2,299checked November 6, 2026
Check current price at TMG Industrial
Fit details
TMG Industrial TFMS50 flail mowerFlail mower

TMG Industrial

TFMS50

49″ working cut, inches · 30–60 hp · basis unclear

Possible — confirm details

Confirm the actual hitch category, required bushings and complete mounting arrangement; multiple listed categories do not establish quick-hitch compatibility.

$2,799checked November 7, 2026
Check current price at TMG Industrial
Fit details

5 more possible options in the full comparison table — see all.

12 ruled out by published specs
Scope of this guideU.S. Farmall Utility 65C · 12x12 power shuttle · MFD · cab · independent PTO 540/540E. Each configuration below states the model and equipment covered by its sources.

Woodland Mills WC68 and WC88, WoodMaxx’s chippers and Wallenstein BX72S fit for chipping. TMG TFM60 and TFMS50, WoodMaxx FM-78, Farmer-Helper FH-EFGC and all three Land Pride FM25 widths fit for mowing.

  • Brochure and page: 64 engine hp, 50 PTO hp; 12x12 power shuttle; cab; Category 1/2.
  • Lift: 3,956 lb at 24 inches behind the pin.
  • TMG’s 50-PTO-hp cap and WC68’s 50 maximum: exactly at.
  • WoodMaxx full chipper capacity (50+): exactly at.
  • 45-PTO-hp ceilings: 5 over.
  • 6,548 lb MFD cab.

Choose the exact configuration.

U.S. Farmall Utility 65C · 12x12 power shuttle · MFD · cab · independent PTO 540/540E

50 PTO hp

Current U.S. Case IH Farmall Utility 65C (cab, 3.4-L four-cylinder engine) from the August 2026 utility brochure and the current model page. 6,548 lb MFD cab without ballast.

Engine power
64 hp · 64 engine hp at rated engine rpm in Case IH’s August 2026 utility brochure; the current page agrees. It is not PTO power.
Rear hitch
Category 1 / 2
Lift at 24 inches
3,956 lb · 3,956 lb standard lift capacity “measured @ 24 in. behind pin” in the August 2026 utility brochure.
Lift at link ends
Not confirmed in reviewed sources
Hydraulics
See the brochure’s implement pump figure.
Pressure
Not published in the reviewed brochure.
Find attachments for this tractor

FOLLOW THE NUMBERS

Sources & documentation

Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.

  1. Case IH Farmall utility tractors brochure (PDF created August 21, 2026)Small Utility Specifications (65C, 70A, 75A, 75C): Engine HP, PTO HP, 3-point Hitch Category 1/2, Lift Capacity (footnote 2: measured @ 24 in. behind pin), transmission, weight
  2. Case IH Farmall Utility 65C current U.S. product pagePTO Horsepower 50; Rated Engine Power 64 hp
  3. Woodland Mills official U.S. product page — Capacity and hydraulic infeed sections; current price
  4. Woodland Mills WC68 operator manual, Rev C, 28-May-2024 — Printed p9 product/shipping weights; p12 Cat 1 and PTO range; operation/setup sections
  5. TMG Industrial official U.S. TFM60 product page — Current price, operation weight, width and shipping weight
  6. TMG TFM60/68/72 manual — cover v.2022.11.29; filename 2025.01.09 — p6 power; p11 hitch adjustment; p12 specifications
  7. Official U.S. TFMS50 page: operating specifications and price
  8. TMG TFMS50/60/72 manual, 2025-01-09, pp6, 10, 14–15, 19–20
  9. Official WM-8M page: configuration, 775 lb hitch weight and price
  10. WM-8M manual linked by current WoodMaxx manual index
  11. WoodMaxx FAQ, question 1: mechanical versus hydraulic feed
  12. Official FM-78 page: exact hammer variant, price and equipment
  13. Current FM-62/62H and FM-78/78H manual: printed p40 / PDF p41
  14. WoodMaxx manual index: Models 2025 to current
  15. Official MX-9900 page: power/capacity claims, feed, hitch and current sale price
  16. MX-9900 manual Rev C, September 18, 2026: specifications and setup
  17. Wallenstein BX72S current U.S. page — engine power, current hitch categories, capacity, accessories and reference mass
  18. BX72S official support page — current operator/setup documents
  19. BX-S operator manual Z97085_En, Rev Jan-2025 — pp14,18–22,26,28,30,40
  20. PTO shaft instructions Z97844_En, Rev Aug-2024 — tractor/quick-hitch sizing
  21. Land Pride FM25 current North American family and model listing
  22. Official FM25 public catalog response — active models, gallery and linked documents
  23. FM25 operator manual 333-138M, printed 7/1/24 — requirements pp14–20, options pp15,30,33, specifications p39
  24. Official FM25 brochure — printed p12 model table
  25. Farmry HFS87 official product page — tractor power range, gearbox HP, widths, linkage, weight and price
  26. Farmry HFS/HFSS Series operator manual, Rev 1.6 — printed p17 specifications

FROM YOUR TRACTOR TO THE JOB

Equipment guides for this model.

FIELD GUIDE

Case IH Farmall Utility 65C wood chippers: WM-8M or MX-9900

WoodMaxx rates WM-8M from 19 PTO hp and MX-9900 from 25, with full capacity at 50+; the cab utility 65C has exactly 50. Woodland Mills WC68 (to 50) and WC88 and Wallenstein BX72S fit too. The 45-PTO-hp chippers and Wallenstein BX52S do not.

Read the guide →FIELD GUIDE

Case IH Farmall Utility 65C flail mowers: TFM60 or TFMS50 at the cap

TMG caps TFM60 and TFMS50 at 50 PTO hp in its manual; the cab utility 65C has exactly 50. WoodMaxx FM-78, Farmer-Helper FH-EFGC and all three Land Pride FM25 widths fit with room. WoodMaxx FM-62 and Farmry LFP47 stop at 45.

Read the guide →