PTO chipperWoodland Mills
WC68
6″ max. chip diameter · 20–50 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
KIOTI · COMPACT TRACTOR ATTACHMENTS
The DK5020’s 50.3 gross engine hp does not mean more than 50 hp reaches its PTO. Its 41.5 PTO hp lies below a 50 PTO-hp implement ceiling and above WC68’s over 40 full-feed condition, while the similarly powered DK5320SEH delivers 39.3 PTO hp.
By Acreage Equipment · Reviewed November 7, 2026 · Specification research, not a field test

PTO WOOD CHIPPERS FOR THE DK5020
13 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
PTO chipperWoodland Mills
6″ max. chip diameter · 20–50 PTO hp
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
PTO chipperWoodland Mills
8″ maximum branch diameter, inches · 35–100+ PTO hp
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWallenstein
5″ max. chip diameter · 30–55 engine hp · current U.S. page (manual table: 40–55 hp for the BX52R)
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
PTO chipperWallenstein
7″ max. chip diameter · 45–85 engine hp · current U.S. page (manual table: 50–85 hp for the BX72R)
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
PTO chipperFarmer-Helper
4″ published feed-capacity short side, inches · 15–45 PTO hp in current index-linked manual; older/page conflicts retained
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperFarmry
5″ max. chip diameter · 15–45 PTO hp
Resolve the conflicting published specifications for the exact model revision.
7 more possible options in the full comparison table — see all.
FLAIL MOWERS FOR THE DK5020
18 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
Flail mowerWoodMaxx
55″ cutting width, inches · 24–45 PTO hp · Hammer blades only
Confirm rear remotes, hydraulic flow and pressure requirements.
Flail mowerWoodMaxx
70″ cutting width, inches · 30–65 PTO hp · Hammer blades only
Confirm rear remotes, hydraulic flow and pressure requirements.
Flail mowerTMG Industrial
49″ working cut, inches · 30–60 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
47.2″ cutting width, inches · 25–45 hp · basis unclear
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
87″ cutting width · 30–85 HP (basis not stated) · official page and manual
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmer-Helper
37″ cutting width, inches · 15–45 PTO hp on the product page; manual lists the 15-PTO-hp minimum and a 45-hp gearbox
Confirm the conflicting tractor specifications in your serial-specific manual; official source values differ.
12 more possible options in the full comparison table — see all.
Synchronized shuttle · 8F/8R · 4 WD · ROPS
Current U.S. DK5020 standard synchronized-shuttle 8F/8R, 4 WD, ROPS. Excludes SE/HST and cab variants, European HS/Narrow models, and similarly numbered DK families. Confirm serial number, tires, ballast and any dealer-installed hydraulic valves.
Current product page says 16.5 gpm/62.4 L/min; current DK20 brochure says 14.6 gpm/55.1 L/min and U.S. manual says 14.56 total, 9.62 main plus 4.94 steering.
Publish the manual split with the current-page conflict visible. Confirm hardware/serial-specific specification; do not substitute SE pump totals into this standard model.
The current page identifies Manual: Synchro Shuttle but lists 4 forward/2 reverse and travel speeds that appear shifted between mph and km/h. Current brochure and model-specific manual specify 8F/8R.
Use the corroborated 8F/8R synchronized-shuttle configuration; do not reuse the erroneous count or speed conversions.
FOLLOW THE NUMBERS
Research record reviewed November 7, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB
DK5020’s 41.5 PTO hp exceeds WC68’s over 40 hp condition for full six-inch material at full feed speed. Do not transfer that result to the 50.3 engine-hp DK5320SEH, which has 39.3 PTO hp. A WC88 still introduces a higher power condition and heavier implement rather than an automatic upgrade.
Read the guide →FIELD GUIDEDK5020 is a 50.3 engine-hp tractor with 41.5 PTO hp. That difference matters at the upper end: WoodMaxx FM62H’s 45 PTO-hp maximum and TMG’s 50 PTO-hp manual ceiling are both above the actual PTO rating. A generic tractor-hp label, however, still needs its basis resolved.
Read the guide →