PTO chipperWallenstein
BX72S
7″ max. chip diameter · 50–85 engine hp · official U.S. page
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
KIOTI · COMPACT TRACTOR ATTACHMENTS
The KIOTI DK5520 is the top gear-drive DK20, rated 55 gross engine hp and 46.4 PTO hp in KIOTI’s September 2025 brochure (45.6 on its web page). Either figure is over the 45-PTO-hp ceilings of WoodMaxx FM-62, Farmer-Helper FH-BX62S and Farmry WCAP5 Pro. The brochure and the 2023 manual list a Category II hitch; the web page says Category 1.
By Acreage Equipment · Reviewed November 9, 2026 · Specification research, not a field test

PTO WOOD CHIPPERS FOR THE DK5520
6 of 19 pto wood chippers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
PTO chipperWallenstein
7″ max. chip diameter · 50–85 engine hp · official U.S. page
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
PTO chipperWoodMaxx
8″ max. chip diameter · 19 PTO hp minimum; maximum not stated
Resolve the conflicting published specifications for the exact model revision.
PTO chipperWoodMaxx
8″ max. chip diameter · 19 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWoodMaxx
8″ maximum chip diameter, inches · 20 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWoodMaxx
9″ maximum chip diameter, inches · 25 PTO hp minimum; maximum not stated
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
PTO chipperWallenstein
7″ max. chip diameter · 45–85 engine hp · current U.S. page (manual table: 50–85 hp for the BX72R)
Confirm the correct attachment and driveline configuration for the tractor’s PTO speed; listed speed options are discrete settings.
FLAIL MOWERS FOR THE DK5520
6 of 23 flail mowers we track pass the published power, hitch and speed screen. Each still has a detail to confirm with the seller.
Flail mowerWoodMaxx
70″ cutting width, inches · 30–65 PTO hp · Hammer blades only
Resolve the conflicting published specifications for the exact model revision.
Flail mowerWoodMaxx
70″ cutting width, inches · 30–65 PTO hp · Y-blades only
Confirm the complete operating weight; a shipping weight cannot establish the attachment load.
Flail mowerWoodMaxx
70″ cutting width, inches · 30–65 PTO hp · Hammer blades only
Confirm rear remotes, hydraulic flow and pressure requirements.
Flail mowerLand Pride
72″ cutting width · 42–80 tractor hp · engine/PTO basis unspecified
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerLand Pride
84″ cutting width · 49–80 tractor hp · engine/PTO basis unspecified
Ask the manufacturer whether the horsepower range means engine or PTO power.
Flail mowerFarmry
87″ cutting width · 30–85 HP (basis not stated) · official page and manual
Ask the manufacturer whether the horsepower range means engine or PTO power.
U.S. DK5520 · 8F/8R synchronized shuttle · 4WD · ROPS · independent PTO
Current U.S. KIOTI DK5520 with the 8F/8R synchronized shuttle, ROPS, from the September 2025 DK20/DK20SE brochure, the current web page and the 2023 U.S. DK20 owner’s manual. ROPS weight 3,373 lb in the manual. Cab models are not profiled. No model-year or serial cutoff is established.
The September 2025 brochure lists the DK5520 at 46.4 PTO hp; the current web page lists 45.6. The 2023 manual’s PTO power row for the DK4520/5020/5520 is blank.
The brochure’s 46.4 is used and the web figure is shown beside it. Both exceed 45-PTO-hp ceilings.
The September 2025 brochure and the 2023 manual list the DK5520 3-point hitch as Category II (the DK4520 and DK5020 as Category I). The current DK5520 web page lists Category 1.
Category 2 is recorded from the brochure and manual, so Category 1-only attachments screen as a hitch mismatch. Confirm the fitted lower-link ends before ordering.
The brochure lists 14.6 gpm for the DK4520, DK5020 and DK5520, matching the manual’s 9.62 + 4.94 gpm. The DK5520 and DK5020 web pages list 16.5 gpm; the DK4520 page lists 14.7.
14.6 gpm is recorded from the brochure and manual.
FOLLOW THE NUMBERS
Research record reviewed November 9, 2026. Confirm the current manual and the exact revision supplied with your machine.
FROM YOUR TRACTOR TO THE JOB