THE BUYING PERSPECTIVE
Know before you order.
- The 6 × 8-inch throat accepts bulkier branches, but the 747-pound implement adds a meaningful lift and ballast check. Full 6-inch logs at full feed speed require over 40 PTO HP according to the maker.
- Use current 2024 manual weight, not older manuals: older WC46 references show 550 lb; older WC68 references show 710 lb.
- Operating range and full-diameter/full-feed power threshold are distinct specifications.
- Confirm exact tractor model, transmission, model year and manual implement limits.
- Check three-point geometry, actual lift capacity at the implement load center, front ballast and axle limits.
- Check PTO shaft length, overlap, shielding and clearance across permitted hitch travel; quick hitches change geometry.
- The current product page checked November 7, 2026 lists 825 lb shipping weight; the retained 2024 Rev C manual lists 842 lb. Ask for the actual order’s packaged weight and dimensions. Neither shipping figure replaces the retained product weight or a complete operating-load confirmation.
Published specifications
- Power requirement
- 20–50 PTO hp
- Rear PTO
- 540 rpm
- Three-point hitch
- Category 1
- max. chip diameter
- 6 inches
- Unit weight
- 747 lb — Product weight, 2024 operator manual Rev C p9
- Hydraulics
- Self-contained tank and belt-driven pump; manufacturer explicitly states no tractor hydraulics required.
- Accessories & setup
- Trimmable shear-bolt PTO shaft; Quick-hitch adapters; Fill self-contained hydraulic reservoir with specified oil; Measure and trim PTO shaft per manual; Set bed plate clearance and check fastener torque
Specifications are manufacturer-published, not measured by Acreage Equipment. A shipping weight is not treated as operating weight.
FOLLOW THE NUMBERS
Sources & documentation
Research record reviewed November 6, 2026. Confirm the current manual and the exact revision supplied with your machine.
