SIMILAR MACHINES. DIFFERENT DECISIONS.
Find the differences that matter.
175 focused comparisons. Understand the differences in power, weight and setup before you choose.
Find your comparison
82 comparisons matching your search
82 FOCUSED COMPARISONS
PTO wood chippers
vs
Wallenstein BX52S vs WoodMaxx MX-9900: engine-rated 5-inch or PTO-rated 9-inch
BX52S or MX-9900?
Read the comparison →
vsFarmry WCAP5 PRO vs WoodMaxx MX-9900: 5-inch gravity or 9-inch hydrostatic feed
WCAP5 PRO or MX-9900?
Read the comparison →
vs
Farmer-Helper FH-BX42 vs WoodMaxx MX-8800: $1,683 or $5,890
FH-BX42 or MX-8800?
Read the comparison →vsWallenstein BX52S vs WoodMaxx MX-8800: 5-inch gravity or 8-inch hydrostatic feed
BX52S or MX-8800?
Read the comparison →
vs
Woodland Mills TFG55 vs WoodMaxx WM-8M: 346-lb sub-compact chipper or 775-lb 8-inch
Sub-compact or compact: TFG55 or WM-8M?
Read the comparison →vsFarmer-Helper FH-BX42 vs WoodMaxx WM-8M: 4-inch gravity or 8-inch mechanical feed
FH-BX42 or WM-8M?
Read the comparison →vs
Farmer-Helper FH-BX42 vs Woodland Mills WC68: $1,683 gravity or $3,450 hydraulic feed
Compact tractor: FH-BX42 or WC68?
Read the comparison →vsFarmry WCAP5 PRO vs WoodMaxx MX-8800: $1,899 or $5,890 for compact-tractor chipping
Compact tractor: WCAP5 PRO or MX-8800?
Read the comparison →vsWallenstein BX52S vs WoodMaxx WM-8M: 5-inch gravity or 8-inch mechanical feed
Compact tractor: BX52S or WM-8M?
Read the comparison →
vs
Farmer-Helper FH-BX62S vs WoodMaxx WM-8H: 6.5-inch gravity or 8-inch hydraulic feed
Compact tractor at 25–45 PTO hp: FH-BX62S or WM-8H?
Read the comparison →
vsFarmry WCAP5 vs WoodMaxx WM-8H: $1,698 gravity feed or $4,095 hydraulic feed
Budget 5-inch or full-featured 8-inch: WCAP5 or WM-8H?
Read the comparison →vsWoodMaxx MX-8800 vs WM-8M: hydrostatic or mechanical feed at 8 inches
WoodMaxx 8-inch: MX-8800 or WM-8M?
Read the comparison →vsWoodland Mills TFG55 vs WC68: gravity feed or hydraulic feed between 20 and 30 PTO hp
Woodland Mills on a 20–30 PTO hp tractor: TFG55 or WC68?
Read the comparison →vs
Wallenstein BX52S vs Woodland Mills WC46: engine-rated 5-inch or PTO-rated 4-inch
Compact tractor: BX52S or WC46?
Read the comparison →vsFarmry WCAP5 PRO vs Woodland Mills WC46: 5-inch gravity or 4-inch hydraulic feed
Small tractor at 15–30 PTO hp: WCAP5 PRO or WC46?
Read the comparison →vsFarmer-Helper FH-BX62S vs Woodland Mills WC46: gravity feed or hydraulic feed between 25 and 30 PTO hp
Tractor at 25–30 PTO hp: FH-BX62S or WC46?
Read the comparison →vsFarmer-Helper FH-BX62S vs Farmry WCAP5 PRO: 25–45 or 15–45 PTO hp
Compact tractor under 45 PTO hp: FH-BX62S or WCAP5 PRO?
Read the comparison →vsFarmer-Helper FH-BX42 vs Farmry WCAP5: PTO-rated or engine-rated at the same price
Small tractor, about $1,700: FH-BX42 or WCAP5?
Read the comparison →vsFarmry WCAP5 Pro vs Wallenstein BX52S: two 5-inch gravity chippers rated differently
Sub-compact near 18 PTO / 24 engine hp: WCAP5 Pro or BX52S?
Read the comparison →vsWoodMaxx MX-9900 vs WM-8H: 9-inch hydrostatic or 8-inch hydraulic feed
Category 2 tractor over 50 PTO hp: MX-9900 or WM-8H?
Read the comparison →vsFarmry WCAP5 vs WoodMaxx MX-8800: a 45-hp-capped gravity chipper or an 8-inch hydrostatic feed
My tractor is about 45 engine hp: WCAP5 or MX-8800?
Read the comparison →vsFarmry WCAP5 Pro vs WoodMaxx WM-8H: gravity 5-inch or hydraulic 8-inch near 19 PTO hp
With 17 to 20 PTO hp: WCAP5 Pro or WM-8H?
Read the comparison →vsFarmer-Helper FH-BX42 vs WoodMaxx WM-8H: 4-inch gravity or 8-inch hydraulic feed near 19 PTO hp
With about 19 PTO hp: FH-BX42 or WM-8H?
Read the comparison →
vsWallenstein BX36S vs Woodland Mills TFG55: two chippers rated from 12 hp
My tractor has under 15 PTO hp: BX36S or TFG55?
Read the comparison →vsFarmry WCAP5 vs Wallenstein BX52S: two engine-rated 5-inch chippers for small tractors
My tractor is rated about 23 engine hp: WCAP5 or BX52S?
Read the comparison →
vsWallenstein BX72S vs WoodMaxx MX-8800: gravity feed or hydrostatic feed for a large compact tractor
With 60 PTO and 74 engine hp: BX72S or MX-8800?
Read the comparison →vsFarmry WCAP5 vs Woodland Mills TFG55: two light gravity chippers for small tractors
My sub-compact has about 17 PTO and 21 engine hp: WCAP5 or TFG55?
Read the comparison →vsFarmer-Helper FH-BX42 vs Wallenstein BX52S: a PTO-rated 4-inch chipper or an engine-rated 5-inch one
My tractor has about 18 PTO and 24 engine hp: FH-BX42 or BX52S?
Read the comparison →vsWoodland Mills WC46 vs WoodMaxx WM-8H: a light 4-inch chipper or an 8-inch one at its 19-hp floor
My sub-compact has 19 PTO hp and a 700-lb lift: WC46 or WM-8H?
Read the comparison →vsFarmry WCAP5 vs Farmer-Helper FH-BX62S: a 45-engine-hp ceiling or a 45-PTO-hp ceiling
My tractor is rated 45 engine hp and about 37 PTO hp: WCAP5 or FH-BX62S?
Read the comparison →vsFarmer-Helper FH-BX62S vs WoodMaxx MX-8800: a 45-PTO-hp ceiling on Category 1 or hydrostatic feed on Category 1 and 2
My tractor has 44.9 PTO hp and may have a Category 2 hitch: FH-BX62S or MX-8800?
Read the comparison →vsWoodMaxx WM-8M vs MX-9900: fixed mechanical feed or a 9-inch hydrostatic-feed chipper
On a Category 2 tractor with about 48 PTO hp: WM-8M or MX-9900?
Read the comparison →vsFarmry WCAP5 Pro vs Woodland Mills WC68: gravity feed to 45 PTO hp or hydraulic feed with a 40-hp full-feed line
My tractor has 36–42 PTO hp: WCAP5 Pro or WC68?
Read the comparison →vsFarmry WCAP5 vs WoodMaxx WM-8M: a 45-engine-hp ceiling or a 19-PTO-hp floor
My tractor has about 45 engine and 36 PTO hp: WCAP5 or WM-8M?
Read the comparison →vsFarmry WCAP5 vs Wallenstein BX72S: two engine ranges with a 5-hp gap between them
My tractor is rated 45–50 engine hp: WCAP5 or BX72S?
Read the comparison →vs
Farmry WCAP5 vs Woodland Mills WC88: a 45-engine-hp ceiling or a 35-PTO-hp floor
My tractor has 45 engine hp and 34–38 PTO hp: WCAP5 or WC88?
Read the comparison →vsFarmry WCAP5 Pro vs Wallenstein BX72S: a 45-PTO-hp ceiling or a 50-engine-hp floor
With about 45 PTO and 57 engine hp, is WCAP5 Pro still inside, or should I buy BX72S?
Read the comparison →vsFarmry WCAP5 Pro vs Woodland Mills WC88: a 45-PTO-hp ceiling or a 35-PTO-hp floor
My tractor has 35–41 PTO hp: the small WCAP5 Pro or the 8-inch WC88?
Read the comparison →vsFarmry WCAP5 vs Woodland Mills WC46: an engine-rated 5-inch gravity chipper or a PTO-rated 4-inch hydraulic-feed chipper
With 28 PTO and 37 engine hp, should I buy the larger-opening WCAP5 or the hydraulic-feed WC46?
Read the comparison →vsWallenstein BX72S vs WoodMaxx WM-8H: an engine-rated 7-inch gravity chipper or a PTO-rated 8-inch hydraulic-feed chipper
My tractor has 41.3 PTO hp and about 50 engine hp, gross or net: BX72S or WM-8H?
Read the comparison →vsWallenstein BX72S vs Woodland Mills WC68: a 50-engine-hp floor or a 40-PTO-hp full-feed condition
With 50 engine and 39.8 PTO hp, should I step up to BX72S or stay with WC68?
Read the comparison →vsWoodland Mills WC68 vs WoodMaxx WM-8M: a 6-inch hydraulic feed or an 8-inch mechanical feed
My tractor has about 33 PTO hp, short of WC88’s 35: should I buy the 6-inch WC68 or the 8-inch WM-8M?
Read the comparison →vsFarmer-Helper FH-BX62S vs Wallenstein BX72S: a 45-PTO-hp ceiling or a 50-engine-hp floor
With 44.7 PTO and 55 engine hp, should I buy FH-BX62S, which I am just inside, or step up to BX72S?
Read the comparison →vsFarmry WCAP5 vs Woodland Mills WC68: an engine-rated 5-inch chipper or a PTO-rated 6-inch chipper
With about 48 engine and 37 PTO hp, is the lower-priced WCAP5 still inside its range, or do I need WC68?
Read the comparison →vsWallenstein BX72S vs WoodMaxx WM-8M: Category 2 chippers for a 50-hp tractor
On a Category 2 tractor with about 52 engine and 42–44 PTO hp, is BX72S or WM-8M the better chipper?
Read the comparison →vsWoodland Mills WC88 vs WoodMaxx WM-8M: two 8-inch chippers, 35 PTO hp apart at the minimum
With about 34–36 PTO hp, should I buy WC88 or the lower-minimum WM-8M?
Read the comparison →vsWallenstein BX52S vs Woodland Mills WC88: a 5-inch engine-rated gravity chipper or an 8-inch hydraulic-feed chipper
On a tractor with about 38 PTO and 48 engine hp, should I buy the 5-inch BX52S or step up to the 8-inch WC88?
Read the comparison →vsWoodMaxx MX-9900 vs Farmer-Helper FH-BX62S: two 25-PTO-hp chippers, $4,598 apart
With 26–30 PTO hp, is MX-9900’s hydrostatic feed and 9-inch opening worth almost three times FH-BX62S’s price?
Read the comparison →vsWoodland Mills WC68 vs Farmer-Helper FH-BX62S: hydraulic 6-inch feed or a gravity-fed 6.5 × 12-inch opening
With about 25–30 PTO hp, is WC68’s hydraulic feed worth $1,058 more than FH-BX62S’s gravity feed and larger opening?
Read the comparison →vsWoodland Mills WC46 vs WoodMaxx WM-8M: a 4-inch hydraulic feed or an 8-inch mechanical feed
On a small tractor, should I buy the 4-inch WC46 with variable hydraulic feed or the 8-inch WM-8M with a fixed mechanical feed?
Read the comparison →vsWallenstein BX52S vs WoodMaxx WM-8H: gravity or hydraulic rollers?
Would adjustable roller feed help my material pile enough to justify the hydraulic system and larger load review?
Read the comparison →vsFarmry WCAP5 PRO vs WoodMaxx WM-8M: gravity or mechanical feed?
Do I want gravity feed for smaller branches or a powered mechanical roller for a larger material mix?
Read the comparison →vsWoodland WC88 vs Farmer-Helper FH-BX62S: powered feed or gravity feed
Should I choose WC88’s controllable infeed for larger material, or FH-BX62S’s direct-drive gravity system?
Read the comparison →vsFarmry WCAP5 vs Wallenstein BX36S: capacity and mounting choices
Is WCAP5’s larger opening useful for my branches, or does BX36S suit a smaller tractor and work area?
Read the comparison →vsWoodland WC68 vs WoodMaxx MX-9900: capacity and delivery setup
Does my work justify MX-9900’s larger opening, or is WC68 the more suitable powered-feed option?
Read the comparison →vsFarmry WCAP5 PRO vs Farmer-Helper FH-BX42: opening shape and storage
Should I choose WCAP5 PRO or FH-BX42 for mixed branches and limited storage space?
Read the comparison →vsWallenstein BX52S vs Farmer-Helper FH-BX62S: capacity and storage
Is the larger FH-BX62S opening worth the storage and load questions compared with BX52S?
Read the comparison →vsFarmry WCAP5 PRO vs Woodland TFG55 PTO: two 5-inch gravity chippers
Should I choose WCAP5 PRO or TFG55 PTO for a small tractor and a mixed branch pile?
Read the comparison →vsWoodMaxx MX-8800 vs Woodland Mills WC88: two 8-inch feed systems
Does MX-8800 or WC88 make more sense for my tractor and recurring brush work?
Read the comparison →vsWallenstein BX36S vs Farmer-Helper FH-BX42: small gravity-feed chippers
Which small gravity-feed chipper better suits my tractor and storage space: BX36S or FH-BX42?
Read the comparison →vsWallenstein BX72S vs WoodMaxx MX-9900: gravity feed versus a larger hydrostatic option
Is MX-9900’s larger opening and operator-controlled hydrostatic feed useful for the intended wood and power?
Read the comparison →vsWallenstein BX72S vs Woodland WC88: seven-inch gravity feed or eight-inch hydraulic feed
Does eight-inch material and controlled feed make WC88 a better candidate than BX72S for this tractor?
Read the comparison →vsWallenstein BX52S vs BX72S: the step from five-inch to seven-inch gravity feed
Does the BX72S’s larger material rating and taller discharge justify its higher engine-power minimum?
Read the comparison →vsWallenstein BX52S vs Woodland TFG55 PTO: two five-inch gravity chippers with different openings
When both carry a 5-inch label, should opening geometry, drive layout or service access decide?
Read the comparison →vsWallenstein BX52S vs Woodland WC68: five-inch gravity feed or six-inch hydraulic control
Does a 6-inch diameter requirement or adjustable feed justify moving from BX52S to WC68?
Read the comparison →vsWallenstein BX36S vs Woodland WC46: fixed gravity feed or controlled hydraulic feed
Is the WC46’s adjustable hydraulic feed and folding chute worth considering over the BX36S fixed gravity hopper?
Read the comparison →vsWallenstein BX36S vs BX52S: branch size and folding storage
Does the BX52S opening and folding hopper solve a need that the smaller BX36S cannot?
Read the comparison →vsFarmer-Helper FH-BX62S vs WoodMaxx WM-8M: gravity draw or a mechanical roller
Do I want gravity draw or a fixed-speed powered feed roller without a hydraulic feed circuit?
Read the comparison →vsFarmer-Helper FH-BX42 vs Woodland TFG55 PTO: two gravity-feed layouts
Which gravity-feed design better suits the opening, blade service and power range I need?
Read the comparison →vsFarmer-Helper FH-BX42 vs Woodland WC46: gravity feeding or hydraulic control
Within the 4-inch class, is adjustable powered feeding worth the higher price and hydraulic service work?
Read the comparison →vsFarmer-Helper FH-BX42 vs FH-BX62S: opening size and storage footprint
Does the BX62S opening justify its higher power minimum and larger folded envelope?
Read the comparison →vsWoodMaxx MX-8800 vs WM-8H: hydrostatic feed system or dual hydraulic rollers?
What does the MX-8800 change over the WM-8H when both advertise an 8-inch capacity?
Read the comparison →vsWoodMaxx MX-9900 vs Woodland Mills WC88: 9-inch opening and different power conditions
Should the MX-9900’s 9-inch opening or the WC88’s power documentation guide a larger PTO chipper purchase?
Read the comparison →vsWoodMaxx MX-8800 vs Woodland Mills WC68: larger throat or defined compact range?
Does an 8-inch MX-8800 throat offer useful value over the 6-inch WC68 on a 20-plus-PTO-hp tractor?
Read the comparison →vsWoodMaxx MX-8800 vs MX-9900: opening size and service access
Are the MX-9900’s larger opening and folding service layout worth the step up from MX-8800?
Read the comparison →vsWoodMaxx WM-8H vs Woodland Mills WC88: two approaches to an eight-inch chipper
How do two eight-inch hydraulic chippers differ in power conditions and setup?
Read the comparison →vsWoodMaxx WM-8H vs Woodland Mills WC68: throat size, feed layout and documented limits
Does an eight-inch throat address a real need beyond the WC68’s six-inch capacity?
Read the comparison →vsWoodMaxx WM-8H vs WM-8M: adjustable hydraulic feed or fixed mechanical feed?
Is adjustable hydraulic feed worth the extra cost over fixed mechanical feed?
Read the comparison →vsWoodland Mills WC68 vs WC88: six-inch or eight-inch hydraulic feed?
Is the WC88’s larger throat useful enough to justify its power and weight requirements?
Read the comparison →vsWoodland Mills WC46 vs TFG55 PTO: hydraulic feed or a lighter chipper
Should I prioritize hydraulic feeding on WC46 or the lower weight of TFG55 PTO?
Read the comparison →vsFarmry WCAP5 vs WCAP5 PRO: what the PRO designation changes
Does WCAP5 PRO justify its extra cost, and do both versions accept the same tractor?
Read the comparison →vsWoodland Mills WC46 vs WC68: power, branch size and lifting weight
Should I buy the WC46 or WC68 when my compact tractor is near 20 PTO hp?
Read the comparison →Want your own combination?
Add up to three products to the saved comparison and select your exact tractor to see the initial specification screen.